Novel Prosthesis Using Silk Fibroin for Small Caliber Vascular

2005 ◽  
Vol 288-289 ◽  
pp. 461-464 ◽  
Author(s):  
Xilan Ma ◽  
Chuan Bao Cao ◽  
Jing Hua Li ◽  
He Sun Zhu
Keyword(s):  
Mechanical Property ◽  
Tissue Engineering ◽  
Silk Fibroin ◽  
Vascular Grafts

A novel prosthesis using silk fibroin with blending heparin and sulfonated silk fibroin was studied. Anticoagulation activities of heparin/silk fibroin and sulfonated silk fibroin/silk fibroin vascular and mechanical property results showed that heparin/silk fibroin and sulfonated silk fibroin/silk fibroin vascular could meet the requirement of small caliber grafts. This study indicated that silk fibroin could be used for developing tissue engineering biological vascular grafts that could use for human coronary or low extremity artery bypasses.

IN VITRO AND IN VIVO DEGRADATION OF A TWISTED SILK FIBROIN–POLY(LACTIC-CO-GLYCOLIC ACID) FIBER COMPOSITE ROPE-LIKE SCAFFOLD AND CHANGES IN ITS MECHANICAL PROPERTIES

2016 ◽  
Vol 16 (04) ◽  
pp. 1650053
Author(s):  
WENYUAN ZHANG ◽  
YADONG YANG ◽  
KEJI ZHANG ◽  
YING LI ◽  
GUOJIAN FANG
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Tissue Engineering ◽  
Mass Loss ◽  
Silk Fibroin ◽  
Glycolic Acid ◽  
Property Loss ◽  
In Vivo Degradation

Natural silk fibroin fiber is slowly degraded, which makes it difficult to be replaced quickly by regenerating tissues of tissue engineering. We used poly(lactic-co-glycolic acid) (PLGA, lactic acid:glycolic acid [Formula: see text] 10:90) fibers to adjust the overall degradation rate of the scaffolds. This study fabricated a three-strand helical composite rope-like scaffold from silk fibroin and PLGA fibers (silk fibroin:PLGA [Formula: see text] 36:64) using a twisting method. In vitro and in vivo degradation experiments were performed over 16 weeks. Results suggest that the in vitro and in vivo degradation tendencies of the scaffold were similar, with mass loss lagging behind mechanical property loss. The speed of degradation in vivo was faster than that in vitro. Mechanical property loss of the scaffold was fast during the first three weeks, when mass loss was slow. Mass loss rate accelerated from weeks 3 to 8. The mass and mechanical properties were relatively stable from 8 to 16 weeks. After 16 weeks of degradation, the scaffold still had considerably strong mechanical properties. The scaffold showed a reasonable and suitable degradation speed with good histocompatibility for ligament tissue engineering.

Surface Modification by Nanobiomaterials for Vascular Tissue Engineering Applications

2020 ◽  
Vol 27 (10) ◽  
pp. 1634-1646 ◽  
Author(s):  
Huey-Shan Hung ◽  
Shan-hui Hsu
Keyword(s):  
Tissue Engineering ◽  
Vascular Tissue ◽  
Thrombus Formation ◽  
Vascular Grafts ◽  
Vascular Tissue Engineering ◽  
Great Success ◽  
Natural Polymers ◽  
Vascular Biomaterials

Treatment of cardiovascular disease has achieved great success using artificial implants, particularly synthetic-polymer made grafts. However, thrombus formation and restenosis are the current clinical problems need to be conquered. New biomaterials, modifying the surface of synthetic vascular grafts, have been created to improve long-term patency for the better hemocompatibility. The vascular biomaterials can be fabricated from synthetic or natural polymers for vascular tissue engineering. Stem cells can be seeded by different techniques into tissue-engineered vascular grafts in vitro and implanted in vivo to repair the vascular tissues. To overcome the thrombogenesis and promote the endothelialization effect, vascular biomaterials employing nanotopography are more bio-mimic to the native tissue made and have been engineered by various approaches such as prepared as a simple surface coating on the vascular biomaterials. It has now become an important and interesting field to find novel approaches to better endothelization of vascular biomaterials. In this article, we focus to review the techniques with better potential improving endothelization and summarize for vascular biomaterial application. This review article will enable the development of biomaterials with a high degree of originality, innovative research on novel techniques for surface fabrication for vascular biomaterials application.

scholarly journals Is Dialdehyde Chitosan a Good Substance to Modify Physicochemical Properties of Biopolymeric Materials?

2021 ◽  
Vol 22 (7) ◽  
pp. 3391
Author(s):  
Sylwia Grabska-Zielińska ◽  
Alina Sionkowska ◽  
Ewa Olewnik-Kruszkowska ◽  
Katarzyna Reczyńska ◽  
Elżbieta Pamuła
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Physicochemical Properties ◽  
Silk Fibroin ◽  
Three Dimensional ◽  
Microscopy Imaging ◽  
Maximum Deformation ◽  
One Step ◽  
Chitosan Blends ◽  
Fourier Transfer Infrared Spectroscopy

The aim of this work was to compare physicochemical properties of three dimensional scaffolds based on silk fibroin, collagen and chitosan blends, cross-linked with dialdehyde starch (DAS) and dialdehyde chitosan (DAC). DAS was commercially available, while DAC was obtained by one-step synthesis. Structure and physicochemical properties of the materials were characterized using Fourier transfer infrared spectroscopy with attenuated total reflectance device (FTIR-ATR), swelling behavior and water content measurements, porosity and density observations, scanning electron microscopy imaging (SEM), mechanical properties evaluation and thermogravimetric analysis. Metabolic activity with AlamarBlue assay and live/dead fluorescence staining were performed to evaluate the cytocompatibility of the obtained materials with MG-63 osteoblast-like cells. The results showed that the properties of the scaffolds based on silk fibroin, collagen and chitosan can be modified by chemical cross-linking with DAS and DAC. It was found that DAS and DAC have different influence on the properties of biopolymeric scaffolds. Materials cross-linked with DAS were characterized by higher swelling ability (~4000% for DAS cross-linked materials; ~2500% for DAC cross-linked materials), they had lower density (Coll/CTS/30SF scaffold cross-linked with DAS: 21.8 ± 2.4 g/cm3; cross-linked with DAC: 14.6 ± 0.7 g/cm3) and lower mechanical properties (maximum deformation for DAC cross-linked scaffolds was about 69%; for DAS cross-linked scaffolds it was in the range of 12.67 ± 1.51% and 19.83 ± 1.30%) in comparison to materials cross-linked with DAC. Additionally, scaffolds cross-linked with DAS exhibited higher biocompatibility than those cross-linked with DAC. However, the obtained results showed that both types of scaffolds can provide the support required in regenerative medicine and tissue engineering. The scaffolds presented in the present work can be potentially used in bone tissue engineering to facilitate healing of small bone defects.

scholarly journals Oxygen Permeability of Silk Fibroin Hydrogels and Their Use as Materials for Contact Lenses: A Purposeful Analysis

Gels ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 58
Author(s):  
Traian V. Chirila
Keyword(s):  
Tissue Engineering ◽  
Bombyx Mori ◽  
Silk Fibroin ◽  
Biomedical Applications ◽  
Oxygen Permeability ◽  
Contact Lenses ◽  
The Past ◽  
Fibrous Protein ◽  
Silk Moth ◽  
Bombyx Mori Silk

Fibroin is a fibrous protein that can be conveniently isolated from the silk cocoons produced by the larvae of Bombyx mori silk moth. In its form as a hydrogel, Bombyx mori silk fibroin (BMSF) has been employed in a variety of biomedical applications. When used as substrates for biomaterial-cells constructs in tissue engineering, the oxygen transport characteristics of the BMSF membranes have proved so far to be adequate. However, over the past three decades the BMSF hydrogels have been proposed episodically as materials for the manufacture of contact lenses, an application that depends on substantially elevated oxygen permeability. This review will show that the literature published on the oxygen permeability of BMSF is both limited and controversial. Additionally, there is no evidence that contact lenses made from BMSF have ever reached commercialization. The existing literature is discussed critically, leading to the conclusion that BMSF hydrogels are unsuitable as materials for contact lenses, while also attempting to explain the scarcity of data regarding the oxygen permeability of BMSF. To the author’s knowledge, this review covers all publications related to the topic.

Application potential of three-dimensional silk fibroin scaffold using mesenchymal stem cells for cardiac regeneration

2021 ◽  
pp. 088532822110185
Author(s):  
Yuksel Cetin ◽  
Merve G Sahin ◽  
Fatma N Kok
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Silk Fibroin ◽  
Cardiac Tissue ◽  
Troponin I ◽  
Cardiac Tissue Engineering ◽  
Swelling Ratio ◽  
Differentiation Potential ◽  
Cardiomyogenic Differentiation

Cardiac tissue engineering focusing on biomaterial scaffolds incorporating cells from different sources has been explored to regenerate or repair damaged area as a lifesaving approach.The aim of this study was to evaluate the cardiomyocyte differentiation potential of human adipose mesenchymal stem cells (hAD-MSCs) as an alternative cell source on silk fibroin (SF) scaffolds for cardiac tissue engineering. The change in surface morphology of SF scaffolds depending on SF concentration (1–6%, w/v) and increase in their porosity upon application of unidirectional freezing were visualized by scanning electron microscopy (SEM). Swelling ratio was found to increase 2.4 fold when SF amount was decreased from 4% to 2%. To avoid excessive swelling, 4% SF scaffold with swelling ratio of 10% (w/w) was chosen for further studies.Biodegradation rate of SF scaffolds depended on enzymatic activity was found to be 75% weight loss of SF scaffolds at the day 14. The phenotype of hAD-MSCs and their multi-linage potential into chondrocytes, osteocytes, and adipocytes were shown by flow cytometry and immunohistochemical staining, respectively.The viability of hAD-MSCs on 3D SF scaffolds was determined as 90%, 118%, and 138% after 1, 7, and 14 days, respectively. The use of 3D SF scaffolds was associated with increased production of cardiomyogenic biomarkers: α-actinin, troponin I, connexin 43, and myosin heavy chain. The fabricated 3D SF scaffolds were proved to sustain hAD-MSCs proliferation and cardiomyogenic differentiation therefore, hAD-MSCs on 3D SF scaffolds may useful tool to regenerate or repair damaged area using cardiac tissue engineering techniques.

scholarly journals Design and Mechanical Properties Verification of Gradient Voronoi Scaffold for Bone Tissue Engineering

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 664
Author(s):  
Haiyuan Zhao ◽  
Yafeng Han ◽  
Chen Pan ◽  
Ding Yang ◽  
Haotian Wang ◽  
...  
Keyword(s):  
Mechanical Property ◽  
Tissue Engineering ◽  
Elastic Modulus ◽  
Porous Structure ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Voronoi Tessellation ◽  
Impact Resistance ◽  
Natural Bone ◽  
The Impact

In order to obtain scaffold that can meet the therapeutic effect, researchers have carried out research on irregular porous structures. However, there are deficiencies in the design method of accurately controlling the apparent elastic modulus of the structure at present. Natural bone has a gradient porous structure. However, there are few studies on the mechanical property advantages of gradient bionic bone scaffold. In this paper, an improved method based on Voronoi-tessellation is proposed. The method can get controllable gradient scaffolds to fit the modulus of natural bone, and accurately control the apparent elastic modulus of porous structure, which is conducive to improving the stress shielding. To verify the designed structure can be fabricated by additive manufacturing, several designed models are obtained by SLM and EBM. Through finite element analysis (FEA), it is verified that the irregular porous structure based on Voronoi-tessellation is more stable than the traditional regular porous structure of the same structure volume, the same pore number and the same material. Furthermore, it is verified that the gradient irregular structure has a better stability than the non-gradient structure. An experiment is conducted successfully to verify the stability performance got by FEA. In addition, a dynamic impact FEA is also performed to simulate impact resistance. The result shows that the impact resistance of the regular porous structure, the irregular porous structure and the gradient irregular porous structure becomes better in turn. The mechanical property verification provides a theoretical basis for the structural design of gradient irregular porous bone tissue engineering scaffolds.

Fabrication of biocompatible porous SAIB/Silk fibroin scaffolds using ionic liquids

2021 ◽  
Author(s):  
Cristiana Gonçalves ◽  
Joana Margarida Gomes ◽  
F. Raquel Maia ◽  
Hajer Radhouani ◽  
Simone Dos Santos Silva ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Ionic Liquids ◽  
Silk Fibroin ◽  
Innovative Methodology

Sucrose acetate isobutyrate (SAIB) is a highly viscous hydrogel and presents many challenges for processing when its application in tissue engineering is envisioned. Herein, is proposed an innovative methodology by...

Sign in / Sign up

Export Citation Format

Share Document