Simulation on the Indentation of Large Grain in the Semi-Fixed Abrasive Plate with Discrete Element Method

2009 ◽  
Vol 416 ◽  
pp. 205-209 ◽  
Author(s):  
Ju Long Yuan ◽  
Ke Feng Tang ◽  
Zhi Wei Wang ◽  
Tao Hong
Keyword(s):  
Discrete Element Method ◽  
Normal Force ◽  
Influence Factor ◽  
Discrete Element ◽  
Vertex Angle ◽  
In The Beginning ◽  
Fixed Abrasive ◽  
Element Method

This paper analyses the influence of indenter’s vertex angle on the ‘trap’ effect of the semi-fixed abrasive plate (SAP) with discrete element method. The indenters of different degree vertex angle are generated by discrete element method, then the indenter is applied processing velocity, which let the indenter press into the SAP, finally three curves of normal force and displacement are gained. From the curves, the normal force of the indenters doesn’t increase quickly and stay in stable in the beginning, because the SAP is full of pore, which let the indenter easily press into the SAP. Through the above indenter simulation, the relations between the lasting time of the ‘trap’ effect and the indenter’s vertex angle are in reverse proportion, if the indenter’s vertex angle is smaller, the lasting time of the ‘trap’ effect of SAP is longer, and the size of large grain is an influence factor in the ‘trap’ effect of SAP.

Fretting Wear Modeling of Coated and Uncoated Surfaces Using the Combined Finite-Discrete Element Method

2011 ◽  
Vol 133 (2) ◽  
Author(s):  
Benjamin D. Leonard ◽  
Pankaj Patil ◽  
Trevor S. Slack ◽  
Farshid Sadeghi ◽  
Sachin Shinde ◽  
...  
Keyword(s):  
Discrete Element Method ◽  
Normal Force ◽  
Discrete Element ◽  
Fretting Wear ◽  
Wear Loss ◽  
New Approach ◽  
Frictional Shear Stress ◽  
Algorithm Stability ◽  
Force Displacement ◽  
Element Method

A new approach for modeling fretting wear in a Hertzian line contact is presented. The combined finite-discrete element method (FDEM) in which multiple finite element bodies interact as distinct bodies is used to model a two-dimensional fretting contact with and without coatings. The normal force and sliding distance are used during each fretting cycle, and fretting wear is modeled by locally applying Archard’s wear equation to determine wear loss along the surface. The FDEM is validated by comparing the pressure and frictional shear stress results to the continuum mechanics solution for a Hertzian fretting contact. The dependence of the wear algorithm stability on the cycle increment of a fretting simulation is also investigated. The effects of friction coefficient, normal force, displacement amplitude, coating thickness, and coating modulus of elasticity on fretting wear are presented.

Review and extension of normal force models for the Discrete Element Method

2007 ◽  
Vol 171 (3) ◽  
pp. 157-173 ◽  
Author(s):  
H. Kruggel-Emden ◽  
E. Simsek ◽  
S. Rickelt ◽  
S. Wirtz ◽  
V. Scherer
Keyword(s):  
Discrete Element Method ◽  
Normal Force ◽  
Discrete Element ◽  
Element Method

Discrete element method to model cracking for two layer systems

TAPPI Journal ◽  
2019 ◽  
Vol 18 (2) ◽  
pp. 101-108
Author(s):  
Daniel Varney ◽  
Douglas Bousfield
Keyword(s):  
Discrete Element Method ◽  
Flexural Modulus ◽  
Single Layer ◽  
Discrete Element ◽  
Flexural Stress ◽  
Layer System ◽  
Three Point Bending ◽  
Moving Force ◽  
Coating Layers ◽  
Element Method

Cracking at the fold is a serious issue for many grades of coated paper and coated board. Some recent work has suggested methods to minimize this problem by using two or more coating layers of different properties. A discrete element method (DEM) has been used to model deformation events for single layer coating systems such as in-plain and out-of-plain tension, three-point bending, and a novel moving force picking simulation, but nothing has been reported related to multiple coating layers. In this paper, a DEM model has been expanded to predict the three-point bending response of a two-layer system. The main factors evaluated include the use of different binder systems in each layer and the ratio of the bottom and top layer weights. As in the past, the properties of the binder and the binder concentration are input parameters. The model can predict crack formation that is a function of these two sets of factors. In addition, the model can predict the flexural modulus, the maximum flexural stress, and the strain-at-failure. The predictions are qualitatively compared with experimental results reported in the literature.

Discrete element method–computational fluid dynamics analyses of flexible fibre fluidization

2021 ◽  
Vol 910 ◽  
Author(s):  
Yiyang Jiang ◽  
Yu Guo ◽  
Zhaosheng Yu ◽  
Xia Hua ◽  
Jianzhong Lin ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Discrete Element Method ◽  
Discrete Element ◽  
Dynamics Analyses ◽  
Element Method

Abstract

scholarly journals Numerical simulation on coal loading process of shearer drum based on discrete element method

2021 ◽  
pp. 014459872110135
Author(s):  
Zhen Tian ◽  
Shuangxi Jing ◽  
Lijuan Zhao ◽  
Wei Liu ◽  
Shan Gao
Keyword(s):  
Numerical Simulation ◽  
Discrete Element Method ◽  
Loading Rate ◽  
Low Cost ◽  
Element Model ◽  
Discrete Element ◽  
Helix Angle ◽  
Loading Process ◽  
Coal Particles ◽  
Element Method

The drum is the working mechanism of the coal shearer, and the coal loading performance of the drum is very important for the efficient and safe production of coal mine. In order to study the coal loading performance of the shearer drum, a discrete element model of coupling the drum and coal wall was established by combining the results of the coal property determination and the discrete element method. The movement of coal particles and the mass distribution in different areas were obtained, and the coal particle velocity and coal loading rate were analyzed under the conditions of different helix angles, rotation speeds, traction speeds and cutting depths. The results show that with the increase of helix angle, the coal loading first increases and then decreases; with the increase of cutting depth and traction speed, the coal loading rate decreases; the increase of rotation speed can improve the coal loading performance of drum to a certain extent. The research results show that the discrete element numerical simulation can accurately reflect the coal loading process of the shearer drum, which provides a more convenient, fast and low-cost method for the structural design of shearer drum and the improvement of coal loading performance.

Sign in / Sign up

Export Citation Format

Share Document