Fabrication of a Composite Coating by Laser, Nanoparticles Self-Assembly and Electrodeposition

2021 ◽  
Vol 1032 ◽  
pp. 84-90
Author(s):  
Ou Chuan Lin ◽  
Ying Luo Zhou ◽  
Jing Li ◽  
Virgil Bunyan
Keyword(s):  
Composite Coating ◽  
Self Assembly ◽  
Surface Coating ◽  
Laser Processing ◽  
Substrate Surface ◽  
Substrate Material ◽  
Processing Method ◽  
Coating Materials ◽  
Different Characteristics ◽  
Micro Morphology

In this paper, a composite micromachining process is introduced. By adjusting the surface microstructure, a composite coating with two kinds of materials with different characteristics was fabricated. Carbon steel is used as the substrate material, and laser processing is used to obtain the micro morphology on the substrate surface. nanoSiC particles were selected as one of the coating materials, and the SiC coating was added through the process of micropore induced nanoparticles self-assembly. Ni was selected as another coating material and added by electrodeposition. This processing method can be used to prepare multifunctional surface coating, combining the characteristics of different materials. This work can provide an idea to create more excellent multifunctional surfaces.

scholarly journals Preparation and Degradation Characteristics of MAO/APS Composite Bio-Coating in Simulated Body Fluid

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 667
Author(s):  
Zexin Wang ◽  
Fei Ye ◽  
Liangyu Chen ◽  
Weigang Lv ◽  
Zhengyi Zhang ◽  
...  
Keyword(s):  
Simulated Body Fluid ◽  
Composite Coating ◽  
Body Fluid ◽  
Composite Coatings ◽  
Degradation Process ◽  
Ceramic Coatings ◽  
Immersion Test ◽  
Substrate Material ◽  
Atmospheric Plasma

In this work, ZK60 magnesium alloy was employed as a substrate material to produce ceramic coatings, containing Ca and P, by micro-arc oxidation (MAO). Atmospheric plasma spraying (APS) was used to prepare the hydroxyapatite layer (HA) on the MAO coating to obtain a composite coating for better biological activity. The coatings were examined by various means including an X-ray diffractometer, a scanning electron microscope and an energy spectrometer. Meanwhile, an electrochemical examination, immersion test and tensile test were used to evaluate the in vitro performance of the composite coatings. The results showed that the composite coating has a better corrosion resistance. In addition, this work proposed a degradation model of the composite coating in the simulated body fluid immersion test. This model explains the degradation process of the MAO/APS coating in SBF.

scholarly journals Impact of anti-biofouling surface coatings on the properties of nanomaterials and their biomedical applications

2018 ◽  
Vol 6 (1) ◽  
pp. 9-24 ◽  
Author(s):  
Yuancheng Li ◽  
Yaolin Xu ◽  
Candace C. Fleischer ◽  
Jing Huang ◽  
Run Lin ◽  
...  
Keyword(s):  
Surface Coating ◽  
Biomedical Applications ◽  
Biological Systems ◽  
Surface Coatings ◽  
Specific Interactions ◽  
Coating Materials

Various anti-biofouling surface coating materials for nanoparticles have been reviewed for the reduction of their non-specific interactions with biological systems.

Groove Shape Optimization of Thrust Air Bearing for Small Size Spindle Considering the Processing Errors

2018 ◽  
Author(s):  
Masayuki Ochiai ◽  
Naoya Kato ◽  
Hiromu Hashimoto
Keyword(s):  
Probability Distribution ◽  
Laser Processing ◽  
Thrust Bearing ◽  
Groove Depth ◽  
Spindle Motor ◽  
Processing Method ◽  
Optimum Shape ◽  
Air Bearing ◽  
Machining Error ◽  
Processing Errors

In this research, we aim to examine the usefulness of the newly developed spindle motor proposed by Ochiai. Since machining error due to tool wear etc. used for microfabrication can be ignored, laser processing was used as a processing method. Thrust bearing grooves were generated by laser processing, and variation in groove depth was observed. Finally, the optimum shape of the thrust bearing groove was obtained by robust optimization using the probability distribution that can be approximated from the obtained machining error.

Microstructural characteristics of SiC-B4C reinforced laser alloying composite coatings

2013 ◽  
Vol 20 (4) ◽  
pp. 307-310
Author(s):  
Li Wei
Keyword(s):  
Wear Resistance ◽  
Composite Coating ◽  
Fine Particles ◽  
Composite Coatings ◽  
Substrate Surface ◽  
Laser Alloying ◽  
Wear Process ◽  
High Microhardness ◽  
Deep Plowing ◽  
Coating Matrix

AbstractA hard SiC-B4C reinforced composite coating was fabricated by laser alloying of SiC-B4C+Al-Sn-Mo-Y2O3 mixed powders on a Ti-3Al-2V alloy. Al-Sn-Mo mixed powders were first used in the laser alloying technique to improve the wear resistance of titanium alloys. Proper selection of the laser alloying process parameters allows us to obtain a composite coating with a metallurgical combination with substrate. Under the action of Mo, fine particles with high microhardness were produced in the coating matrix and also hindered the formation of adhesion patches and deep plowing grooves during the sliding wear process, leading to the improvement of wear resistance of a titanium alloy substrate surface.

Determination of Spread Activation Energy and Assessment of Wetting Behavior of Solders on Metallic Substrates

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
K. N. Prabhu ◽  
G. Kumar
Keyword(s):  
Surface Roughness ◽  
Operating Temperature ◽  
Substrate Surface ◽  
Substrate Material ◽  
Metallic Substrates ◽  
Wetting Behavior ◽  
Substrate Surface Roughness ◽  
Exponential Power ◽  
Kinetics Of

The effects of substrate material, substrate surface roughness, and operating temperature on the wetting behavior of Sn–37Pb, Sn–3.5Ag, and Sn–9Zn eutectic solders on metallic substrates were investigated. Solder spreading kinetics was successfully represented by the exponential power law (EPL): ϕ=exp(−Kτn). The EPL parameter K has the significance of accelerating the kinetics of relaxation while the parameter n represents the resistance to spreading process (spread resistance parameter). EPL parameters exhibited a decreasing trend with an increase in surface roughness. Estimated activation energies for solder spreading were found to be in between those reported for inert and highly reactive spreading systems.

Influence of Surface Condition on the Bonding Strength of Thermal Sprayed Coatings

1997 ◽  
Author(s):  
V.Yu. Ulianitsky ◽  
J.A. Nikolaev ◽  
T.P. Gavrilenko ◽  
M.C. Kim ◽  
J.W. Hong
Keyword(s):  
Bonding Strength ◽  
Substrate Surface ◽  
Surface Condition ◽  
Surface Preparation ◽  
Spray Coating ◽  
Thermal Spray Coating ◽  
Substrate Material ◽  
Detonation Spraying ◽  
Wide Scale ◽  
Detonation Gun

Abstract The role of surface roughness in coating adhesion mechanism is studying for detonation spraying. Roughness was produced by conventional grit blasting, D-gun blasting and was formed as a result of spraying of high-adhesive thin layer of detonation coating. Cermet and alloy powders were sprayed by detonation gun Ob. The coating bonding strength measurements show the WC+25Co adhesion to be above 200 MPa independently of a substrate surface preparation. Contrary, NiCrSiB coatings are very sensitive to surface conditions their adhesion varies from 180 MPa to zero. As-sprayed alloy particles fail in adherence because of insufficient energy to fuse substrate material at a flat surface. Only developed (wide scale) roughness may be fused partially by these particles for their bonding to the substrate. Otherwise, high heated cermet particles do not need special surface preparation (except cleaning) for fusion of substrate material to provide high bonding with it. The wide scale and ball shape roughness, which is similar to the self-reproduced coating roughness, provides the best conditions for the coating bonding and it is recommended as the purpose of surface treatment before thermal spray coating.

Improvement of Dielectric Performance of a Prototype AlN High Temperature Chip-level Package

2011 ◽  
Vol 2011 (HITEN) ◽  
pp. 000052-000057 ◽  
Author(s):  
Liang-Yu Chen
Keyword(s):  
High Temperature ◽  
Dielectric Properties ◽  
High Temperatures ◽  
Substrate Surface ◽  
Substrate Material ◽  
Glass Coating ◽  
Temperature Dependent ◽  
High Temperature Electronics ◽  
Dielectric Performance ◽  
Parasitic Parameters

Aluminum nitride (AlN) has been proposed as a packaging substrate material for reliable high temperature electronics operating in a wide temperature range. However, it was discovered in a recent study that the dielectric properties of some commercial polycrystalline AlN materials change quite significantly with temperature at high temperatures. These material properties resulted in undesired large and temperature-dependent parasitic parameters for a prototype chip-level package based on an AlN substrate with the yttrium oxide dopant. This paper reports a method using a coating layer of a commercial thick-film glass on the AlN substrate surface to significantly reduce both the parasitic capacitances and parasitic conductances between neighboring inputs/outputs (I/Os) of a prototype AlN chip-level package. The parasitic parameters of 8-I/Os low power chip-level packages with the insulating glass coating were characterized at frequencies from 120 Hz to 1 MHz between room temperature and 500°C. These results were compared with the parameters of AlN packages without the glass coating. The results indicate that the parasitic capacitances and conductances between I/Os of the improved prototype AlN packages are significantly reduced and stable at high temperatures. The method using a glass coating provides a feasible way to mitigate the temperature dependence of dielectric properties of AlN and further utilize AlN as a reliable packaging substrate material for high temperature applications.

Sign in / Sign up

Export Citation Format

Share Document