High Temperature Behaviour of Yttria-Stabilized Tetragonal Zirconia and Silicon Nitride Polycrystals Studied by Mechanical Spectroscopy

1993 ◽  
Vol 126-128 ◽  
pp. 479-482 ◽  
Author(s):  
A. Lakki ◽  
R. Schaller
2006 ◽  
Vol 317-318 ◽  
pp. 419-424 ◽  
Author(s):  
Stuart Hampshire ◽  
Michael J. Pomeroy

Oxynitirde glasses are found at triple point junctions and as intergranular films in silicon nitride based ceramics. The glass chemistry, particularly the content of modifyer,usually Y or a rare earth (RE) ion, and the volume fractions of these oxynitride glass phases within the ceramic control the properties of silicon nitride, in particular, creep at high temperature. It is known that, as nitrogen substitutes for oxygen in silicate and aluminosilicate glass networks, increases are observed in glass transition and softening temperatures, viscosities (by two to three orders of magnitude), elastic moduli and microhardness. If changes are made to the RE:Si:Al ratios or different rare earth cation are substituted, properties such as viscosity can be increased by a further two to three orders of magnitude. These effects have implications for the high temperature properties of silicon nitride based ceramics, especially creep resistance. This paper provides an overview of oxynitride glasses and outlines the effect of composition on properties such as glass transition temperature and viscosity and discusses the effects on high temperature behaviour of silicon nitride ceramics.


2005 ◽  
Vol 287 ◽  
pp. 259-264 ◽  
Author(s):  
Stuart Hampshire ◽  
Michael J. Pomeroy

M-Si-Al-O-N glasses (where M = Y or rare earth cation) are intergranular phases in silicon nitride based ceramics in which the composition and volume fraction of these oxynitride glass phases determine the properties of the material, in particular, high temperature mechanical behaviour. Investigations on oxynitride glass formation and properties have shown that nitrogen increases the glass transition and softening temperatures, viscosity, elastic modulus and hardness. By changing the cation ratios or the type of rare earth cation incorporated, properties such as viscosity can be increased further. This paper provides an overview of oxynitride glasses and outlines the effect of composition on properties such as glass transition temperature and viscosity. These effects have important implications for silicon nitride based ceramics where amorphous intergranular films control high temperature properties such as creep resistance.


1995 ◽  
Vol 43 (2) ◽  
pp. 419-426 ◽  
Author(s):  
A. Lakki ◽  
R. Schaller ◽  
G. Bernard-Granger ◽  
R. Duclos

1992 ◽  
Vol 287 ◽  
Author(s):  
Jeanette Persson ◽  
Per-Olov Käll ◽  
Mats Nygren

Ceramics based on silicon nitride have long been considered promising candidates for high temperature engineering applications due to their excellent refractory properties combined with high strength and good resistance to oxidation. It is well known, however, that the performance of ceramics varies considerably with chemical composition, for example with type and amount of intergranular phase. Especially the evaluation of the high temperature behaviour of the ceramics under varying conditions is therefore important in increasing the knowledge of these materials.


2007 ◽  
Vol 554 ◽  
pp. 11-16
Author(s):  
Stuart Hampshire ◽  
Michael J. Pomeroy

Oxynitride glasses are found at grain boundaries, i.e. triple point junctions and intergranular films, in silicon nitride based materials as a result of cooling of liquid phases formed by reaction of sintering additives with silicon nitride and silica present on the nitride surface during the densification of the ceramics. The glass chemistry, particularly the content of modifying cation, usually Y or a rare earth (RE) ion, and the volume fractions of these oxynitride glass phases within the ceramic affect the properties of silicon nitride such as fracture toughness and creep at high temperature. As nitrogen substitutes for oxygen in silicate and alumino-silicate glasses, increases are observed in glass transition and softening temperatures, viscosities (by two to three orders of magnitude), elastic moduli and microhardness. If changes are made to the RE:Si:Al ratios or as the size of the rare earth cation decreases, properties such as viscosity can be increased by a further two to three orders of magnitude. These effects have a strong impact on the mechanical properties of silicon nitride based ceramics, especially creep resistance. This paper provides an overview of previous work on oxynitride glasses and outlines the effect of glass composition on their properties and discusses the implications for high temperature behaviour of Si3N4 ceramics.


Sign in / Sign up

Export Citation Format

Share Document