Research into the Variable Speed Pump Control System for Driving the Cutter Head of Shield Tunneling Machine

2009 ◽  
Vol 628-629 ◽  
pp. 257-262 ◽  
Author(s):  
Tong Xing
Keyword(s):  
Control System ◽  
Hydraulic System ◽  
Closed Loop ◽  
Control Method ◽  
Control Technique ◽  
Closed Loop Control ◽  
Variable Speed ◽  
Shield Tunneling ◽  
Loop Control ◽  
Cutter Head

The cutter head drive hydraulic system of φ1.8m simulate shield machine is introduced in this article, which has the variable speed pump control technique and the closed loop control method. The AMESim simulation model of the hydraulic system is built up, and the efficiency of the hydraulic system, speed control performance by open loop and closed loop control are analyzed. The result of the simulation shows that the variable speed pump control system has higher efficiency than the variable displacement pump control system about 4%-26% in the same condition when the cutter head speed is at the range of 0.5-4r/min, and the hydraulic system has good dynamic characteristics in closed-loop PID control.

Dynamic Characteristics and Double Closed Loop Control Method of Warping Machine

2012 ◽  
Vol 627 ◽  
pp. 428-434
Author(s):  
Tao Yang ◽  
Lin Yin Liu ◽  
Wei Rong Dai
Keyword(s):  
Control System ◽  
Closed Loop ◽  
Dynamic Models ◽  
Control Method ◽  
Stable State ◽  
The Other ◽  
Closed Loop Control ◽  
Loop Control ◽  
Yarn Tension ◽  
Warp Tension

The warp tension is caused by the speed difference between rewinding shaft and unwinding shaft. The mathematical dynamic models of the system are established based on rewinding shaft and unwinding shaft．Double closed loop are included in the control system. One is winding speed closed loop which could control warping speed according to the requirements; the other is tension closed loop which ensure the yarn tension to be kept constant. The experimental results show the curve of tension enters a stable state after two or three times’ oscillation. The accuracy of the yarn tension has reached ±3%.

Double Closed-Loop Control System of Bi-Direction Current Source Inverter

2011 ◽  
Vol 204-210 ◽  
pp. 699-703
Author(s):  
Wei Kang ◽  
Li Xia Zhang ◽  
Zhen Lei
Keyword(s):  
Control System ◽  
Closed Loop ◽  
Control Method ◽  
Current Source ◽  
Battery Pack ◽  
Closed Loop Control ◽  
Loop Control ◽  
Closed Loop Control System ◽  
Loop Control System ◽  
Coordinate Conversion

The double closed-loop control system of current source SPWM inverter (CSI) is designed to meet the need of battery pack testing system. The battery pack has tiny inner resistance, back electromotive force and it acted as a comparative load which made the control system hard to design. The control system aimed at the specialty of the battery pack load and put forward a loop-locked control method based on dq coordinate conversion of CSI. Typical I and II control system is adopted to get a better performance. It increases the transform efficiency by SPWM and gets high power factor and high dynamic response quality by dq coordinate conversion. Simulations and tests proved the correctness and feasibility of the control system.

Combined Temperature and Force Control for Robotic Friction Stir Welding

2013 ◽  
Author(s):  
Axel Fehrenbacher ◽  
Christopher B. Smith ◽  
Neil A. Duffie ◽  
Nicola J. Ferrier ◽  
Frank E. Pfefferkorn ◽  
...  
Keyword(s):  
Control System ◽  
Force Control ◽  
Closed Loop ◽  
Interface Temperature ◽  
Closed Loop Control ◽  
Weld Quality ◽  
Loop Control ◽  
Friction Stir ◽  
Tool Position ◽  
Robotic Friction Stir Welding

The objective of this research is to develop a closed-loop control system for robotic friction stir welding (FSW) that simultaneously controls force and temperature in order to maintain weld quality under various process disturbances. FSW is a solid-state joining process enabling welds with excellent metallurgical and mechanical properties, as well as significant energy consumption and cost savings compared to traditional fusion welding processes. During FSW, several process parameter and condition variations (thermal constraints, material properties, geometry, etc.) are present. The FSW process can be sensitive to these variations, which are commonly present in a production environment; hence, there is a significant need to control the process to assure high weld quality. Reliable FSW for a wide range of applications will require closed-loop control of certain process parameters. A linear multi-input-multi-output process model has been developed that captures the dynamic relations between two process inputs (commanded spindle speed and commanded vertical tool position) and two process outputs (interface temperature and axial force). A closed-loop controller was implemented that combines temperature and force control on an industrial robotic FSW system. The performance of the combined control system was demonstrated with successful command tracking and disturbance rejection. Within a certain range, desired axial forces and interface temperatures are achieved by automatically adjusting the spindle speed and the vertical tool position at the same time. The axial force and interface temperature is maintained during both thermal and geometric disturbances and thus weld quality can be maintained for a variety of conditions in which each control strategy applied independently could fail.

scholarly journals Closed-loop control system for well-defined oxygen supply in micro-physiological systems

2017 ◽  
Vol 3 (2) ◽  
pp. 363-366
Author(s):  
Tobias Steege ◽  
Mathias Busek ◽  
Stefan Grünzner ◽  
Andrés Fabían Lasagni ◽  
Frank Sonntag
Keyword(s):  
Control System ◽  
Oxygen Supply ◽  
Closed Loop ◽  
Microfluidic System ◽  
Closed Loop Control ◽  
Loop Control ◽  
Cell Vitality ◽  
Closed Loop Control System ◽  
Loop Control System

AbstractTo improve cell vitality, sufficient oxygen supply is an important factor. A deficiency in oxygen is called Hypoxia and can influence for example tumor growth or inflammatory processes. Hypoxia assays are usually performed with the help of animal or static human cell culture models. The main disadvantage of these methods is that the results are hardly transferable to the human physiology. Microfluidic 3D cell cultivation systems for perfused hypoxia assays may overcome this issue since they can mimic the in-vivo situation in the human body much better. Such a Hypoxia-on-a-Chip system was recently developed. The chip system consists of several individually laser-structured layers which are bonded using a hot press or chemical treatment. Oxygen sensing spots are integrated into the system which can be monitored continuously with an optical sensor by means of fluorescence lifetime detection.Hereby presented is the developed hard- and software requiered to control the oxygen content within this microfluidic system. This system forms a closed-loop control system which is parameterized and evaluated.

Adaptive synchronization of uncertain fractional-order chaotic systems using sliding mode control techniques

2019 ◽  
Vol 234 (1) ◽  
pp. 3-9 ◽  
Author(s):  
Bahram Yaghooti ◽  
Ali Siahi Shadbad ◽  
Kaveh Safavi ◽  
Hassan Salarieh
Keyword(s):  
Control System ◽  
Sliding Mode Control ◽  
Fractional Order ◽  
Chaotic Systems ◽  
Closed Loop ◽  
Sliding Mode ◽  
Closed Loop Control ◽  
Loop Control ◽  
Closed Loop Control System ◽  
Loop Control System

In this article, an adaptive nonlinear controller is designed to synchronize two uncertain fractional-order chaotic systems using fractional-order sliding mode control. The controller structure and adaptation laws are chosen such that asymptotic stability of the closed-loop control system is guaranteed. The adaptation laws are being calculated from a proper sliding surface using the Lyapunov stability theory. This method guarantees the closed-loop control system robustness against the system uncertainties and external disturbances. Eventually, the presented method is used to synchronize two fractional-order gyro and Duffing systems, and the numerical simulation results demonstrate the effectiveness of this method.

Sign in / Sign up

Export Citation Format

Share Document