Microstructural Evolution in MgAlLiZnCaY and MgAlLiZnCaCu Multicomponent High Entropy Alloys

2018 ◽  
Vol 928 ◽  
pp. 183-187 ◽  
Author(s):  
Khin Sandar Tun ◽  
Manoj Gupta
Keyword(s):  
Microstructural Evolution ◽  
Microstructural Development ◽  
High Entropy Alloy ◽  
High Entropy Alloys ◽  
Light Weight ◽  
Aluminum Casting ◽  
High Entropy ◽  
Characterization Studies ◽  
Melt Deposition ◽  
Constituent Elements

In this research study, two light weight multi-component high entropy alloys (HEAs) consisting of six constituent elements were synthesized. The high entropy alloy having a chemical composition of Mg35Al33Li15Zn7Ca5Y5(atomic pct.) had a density of 2.25 g/cm3, while the high entropy alloy having a composition of Mg35Al33Li15Zn7Ca5Cu5(atomic pct.) had a density of 2.27 g/cm3. The strategy of non-equiatomic composition, high entropy of mixing coupled with low density was applied in designing the alloy systems. Disintegrated melt deposition (DMD) technique was used to synthesize the materials and characterization studies were performed on as-cast materials. The present study emphasizes on examining and understanding the microstructural development in the two light weight high entropy alloys. The formation and presence of phases and microstructural evolution were studied by interchanging yttrium and copper. Microstructural observations revealed presence of multiple phases in the developed alloys and the simplification of the microstructure when copper is used instead of yttrium. Microhardness results revealed a significant increase in hardness of of both the HEAs (3.8 – 4.2 times) when compared to AZ31 commercial magnesium alloy.Keywords: High Entropy Alloy, Magnesium, Aluminum, Casting, Microstructure

Phase Stability and Microstructural Evolution in a Ductile Refractory High Entropy Alloy Al 10Nb 15Ta 5Ti 30Zr 40

2019 ◽  
Author(s):  
V. Soni ◽  
Oleg N. Senkov, PhD ◽  
Jean-Philippe Couzinie, PhD ◽  
Yufeng Zheng, PhD ◽  
Bharat Gwalani, PhD ◽  
...  
Keyword(s):  
Microstructural Evolution ◽  
Phase Stability ◽  
High Entropy Alloy ◽  
High Entropy

scholarly journals Effect of Copper Addition on the AlCoCrFeNi High Entropy Alloys Properties via the Electroless Plating and Powder Metallurgy Technique

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 540
Author(s):  
Mohamed Ali Hassan ◽  
Hossam M. Yehia ◽  
Ahmed S. A. Mohamed ◽  
Ahmed Essa El-Nikhaily ◽  
Omayma A. Elkady
Keyword(s):  
Compressive Strength ◽  
Powder Metallurgy ◽  
Atomic Radius ◽  
The Other ◽  
High Entropy Alloy ◽  
Coating Process ◽  
High Entropy Alloys ◽  
Powder Metallurgy Technique ◽  
Copper Metal ◽  
High Entropy

To improve the AlCoCrFeNi high entropy alloys’ (HEAs’) toughness, it was coated with different amounts of Cu then fabricated by the powder metallurgy technique. Mechanical alloying of equiatomic AlCoCrFeNi HEAs for 25 h preceded the coating process. The established powder samples were sintered at different temperatures in a vacuum furnace. The HEAs samples sintered at 950˚C exhibit the highest relative density. The AlCoCrFeNi HEAs model sample was not successfully produced by the applied method due to the low melting point of aluminum. The Al element’s problem disappeared due to encapsulating it with a copper layer during the coating process. Because the atomic radius of the copper metal (0.1278 nm) is less than the atomic radius of the aluminum metal (0.1431 nm) and nearly equal to the rest of the other elements (Co, Cr, Fe, and Ni), the crystal size powder and fabricated samples decreased by increasing the content of the Cu wt%. On the other hand, the lattice strain increased. The microstructure revealed that the complete diffusion between the different elements to form high entropy alloy material was not achieved. A dramatic decrease in the produced samples’ hardness was observed where it decreased from 403 HV at 5 wt% Cu to 191 HV at 20 wt% Cu. On the contrary, the compressive strength increased from 400.034 MPa at 5 wt% Cu to 599.527 MPa at 15 wt% Cu with a 49.86% increment. This increment in the compressive strength may be due to precipitating the copper metal on the particles’ surface in the nano-size, reducing the dislocations’ motion, increasing the stiffness of produced materials. The formability and toughness of the fabricated materials improved by increasing the copper’s content. The thermal expansion has increased gradually by increasing the Cu wt%.

A review on phase prediction in high entropy alloys

2021 ◽  
pp. 095440622110089
Author(s):  
Vinay Kumar Soni ◽  
S Sanyal ◽  
K Raja Rao ◽  
Sudip K Sinha
Keyword(s):  
Solid Solution ◽  
Phase Formation ◽  
Single Phase ◽  
High Entropy Alloy ◽  
High Entropy Alloys ◽  
Modeling Tools ◽  
High Entropy ◽  
Recent Developments ◽  
Phase Prediction ◽  
The Stability

The formation of single phase solid solution in High Entropy Alloys (HEAs) is essential for the properties of the alloys therefore, numerous approach were proposed by many researchers to predict the stability of single phase solid solution in High Entropy Alloy. The present review examines some of the recent developments while using computational intelligence techniques such as parametric approach, CALPHAD, Machine Learning etc. for prediction of various phase formation in multicomponent high entropy alloys. A detail study of this data-driven approaches pertaining to the understanding of structural and phase formation behaviour of a new class of compositionally complex alloys is done in the present investigation. The advantages and drawbacks of the various computational are also discussed. Finally, this review aims at understanding several computational modeling tools complying the thermodynamic criteria for phase formation of novel HEAs which could possibly deliver superior mechanical properties keeping an aim at advanced engineering applications.

Microstructure development and mechanical performance of Al2CrFeMnTi light-weight high entropy alloy

2021 ◽  
Vol 139 ◽  
pp. 107376
Author(s):  
Hadi Jahangiri ◽  
Samira Mohagheghi ◽  
Armin Asghari Alamdari ◽  
Rifat Yilmaz ◽  
Kübra Gürcan Bayrak ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
High Entropy Alloy ◽  
Light Weight ◽  
Microstructure Development ◽  
High Entropy

Compression stress strengthening modelling of a ultrafine-grained equiatomic SPS CoCrFeNiNb high-entropy alloy

2020 ◽  
pp. 095440622094324
Author(s):  
Marcello Cabibbo ◽  
Filip Průša ◽  
Alexandra Šenková ◽  
Andrea Školáková ◽  
Vojtěch Kučera ◽  
...  
Keyword(s):  
Powder Metallurgy ◽  
Mechanical Alloying ◽  
Oxide Phase ◽  
High Entropy Alloy ◽  
Induction Melting ◽  
High Entropy Alloys ◽  
High Entropy ◽  
Plasma Sintering ◽  
Transmission Electron ◽  
Spark Plasma

High-entropy alloys are known to show exceptionally high mechanical properties, both compression and tensile strength, and unique physical properties, such as their phase stability. These quite unusual properties are primarily due to the microstructure generated by mechanical alloying processes, such as conventional induction arc melting, powder metallurgy, or mechanical alloying. In the present study, an equiatomic CoCrFeNiNb high-entropy alloy was prepared by a sequence of conventional induction melting, powder metallurgy, and compaction via spark plasma sintering. The high-entropy alloys showed uniform sub-micrometer grain microstructure consisted by a mixture of an fcc solid solution strengthened by a hcp Laves phase and a third intergranular oxide phase. The as-cast high-entropy alloys showed an ultimate compression strength (UCS) of ∼1400 MPa, which after sintering and compaction at 1273 K increased up to ∼2400 MPa. Extensive transmission electron microscopy quantitative analyses were carried out to model the UCS. A quite good agreement between the microstructure-strengthening model and the experimental UCS was found.

scholarly journals Phase stability and transformation in a light-weight high-entropy alloy

2018 ◽  
Vol 146 ◽  
pp. 280-293 ◽  
Author(s):  
Rui Feng ◽  
Michael C. Gao ◽  
Chuan Zhang ◽  
Wei Guo ◽  
Jonathan D. Poplawsky ◽  
...  
Keyword(s):  
Phase Stability ◽  
High Entropy Alloy ◽  
Light Weight ◽  
High Entropy
Sign in / Sign up

Export Citation Format

Share Document