The Elastic Deformation of Machine Elements in Mechatronics Systems

2015 ◽  
Vol 220-221 ◽  
pp. 177-181
Author(s):  
Anita Avišāne
Keyword(s):  
Surface Roughness ◽  
Probability Distribution ◽  
Elastic Deformation ◽  
Peak Height ◽  
Distribution Law ◽  
Expectation Value ◽  
Machine Elements ◽  
Deformation Level ◽  
The Given

Today, mechanical engineering requires using more precise equipment, for that reason calculation of the deformation of machine elements requests higher accuracy. In the paper, an elastic deformation of machine elements taking into consideration the height of surface roughness is described. The paper studies and compares three different formulas for the calculation of the density of probability distribution of surface peak height and determination of the mathematical expectation value (ME) of surface peak height for those roughnesses being above a determined deformation level γ. The law on the density of probability distribution of peak height for such a normal random field was established by P.R. Nayak, yet this expression is practically inapplicable for the solution of engineering tasks, therefore the present work establishes that the given formula can be substituted by a simpler distribution law. Comparing three simpler formulas, sufficiently precise solution was established which can substitute the complicated formula.

scholarly journals Research into the 3d roughness of a rough surface

2014 ◽  
Vol 51 (1) ◽  
pp. 62-73
Author(s):  
A. Avisane ◽  
J. Rudzitis ◽  
G. Springis
Keyword(s):  
Probability Distribution ◽  
Random Field ◽  
Normal Distribution ◽  
Mathematical Expectation ◽  
Peak Height ◽  
Contact Theory ◽  
Distribution Law ◽  
Distribution Laws ◽  
Deformation Level

Abstract One of the most important parameters in determination of the deformation associated with roughness is its height on the surface. The authors study the density of probability distribution as related to the surface peak height (SPH) and estimate the mathematical expectation (ME) of SPH for the roughness values above a determined deformation level. In the contact theory, the surface is modelled as a normal random field described by the Nayak SPH formula. Since this formula is practically inapplicable in the engineering tasks, the authors propose to replace it by a simpler distribution law. For this purpose the former is compared with two other formulas obeying the most known probability distribution laws: of normal distribution (Gauss’) law and Rayleigh’s law. Comparison of these three formulas made it possible to derive a simpler yet sufficiently precise one. In the work, the numerical values of the density of SPH probability distribution and the relevant ME values at different deformation levels for all three formulas.

scholarly journals Application of 3D Roughness Parameters for Wear Intensity Calculations

2021 ◽  
Vol 58 (5) ◽  
pp. 27-37
Author(s):  
N. Bulaha ◽  
O. Linins ◽  
A. Avisane
Keyword(s):  
Experimental Data ◽  
Wear Intensity ◽  
Linear Wear ◽  
Roughness Parameters ◽  
Distribution Law ◽  
Relative Level ◽  
Intensity Calculations ◽  
Material Volume ◽  
The Given

Abstract In this paper, calculations of 3D parameter Vm (material volume) of surfaces with irregular roughness and comparison with experimental data were performed, with further application of this parameter in calculations of wear intensity. First, using Mountains Map software for profilometric measurements, 3D roughness processing and determination of material volume Vm at specific relative levels γ were performed. The next step was an additional analysis of the distribution of surface ordinates using a theoretical and experimental Laplace function. The given check confirmed that for mostly surfaces with irregular roughness the ordinate distribution corresponds to the normal Gaussian distribution law, but in cases when the asymmetry of the ordinate distribution function goes outside the permissible limits (|∆Ssk|> 10%), errors> 10 % occur. On this basis, the mathematical formula of the material volume Vm was derived, and the obtained calculations were compared with the measured values. The results showed that the calculated values of the parameter Vm were very close to the experimental data (|∆Vm|<10 %), while at the relative level γ=+3, errors occurred that was related to the deviation from the normal distribution law. It was concluded that the given parameter could be used in the calculations of linear wear intensity, knowing the relative level γ.

scholarly journals Influence of surface roughness on fatigue life of machine elements – the development in experimental investigations and simulations

Mechanik ◽  
2019 ◽  
Vol 92 (5-6) ◽  
pp. 307-313 ◽  
Author(s):  
Wit Grzesik
Keyword(s):  
Surface Roughness ◽  
Fatigue Life ◽  
Construction Materials ◽  
Fatigue Tests ◽  
Experimental Investigations ◽  
Fundamental Information ◽  
Aerospace Alloys ◽  
Machine Elements ◽  
Effect Of Surface

In this paper fundamental information on the influence of surface roughness on fatigue life/limit stresses of machine elements made of different construction materials using different machining/manufacturing processes are presented. The rules for the assessment of surface finish influence represented by the set of microscopic notches on the real machined surfaces, which allow the determination of the stress concentration factor and the correction of a fatigue life limit, are provided. The results of fatigue tests are compared with computed data and predictions using FEM based simulations. The effect of surface discontinues resulting from surface roughness are related to machine elements made of steels, aluminium alloys, aerospace alloys – titanium and nickel based superalloys and composite reinforced by graphite fibres.

The Role and Place of Budget Procedure in the System

2003 ◽  
pp. 42-49 ◽  
Author(s):  
E. Bushmin
Keyword(s):  
Budget Process ◽  
Public Expenditures ◽  
Principal Role ◽  
Process Trends ◽  
The Given ◽  
Rules Of The Game

The article is devoted to the analysis of improving budget process trends. The author offers the concept of "financial technologism". Its usage should promote an essential improvement of the budget process. The given concept is based on the fact that the regulation of budget procedure is the process of determination of "rules of the game", and the order of interaction of different institutions within the framework of the budget process, and the trends and volumes of expenses are the strategy of institutions. The procedure within the budget process plays a principal role as compared with the trends and volumes of public expenditures.

Optimal Density Determination of Bouguer Anomaly Using Fractal Analysis (Case of study: Charak area,IRAN)

2005 ◽  
Vol 1 (1) ◽  
pp. 21-24
Author(s):  
Hamid Reza Samadi
Keyword(s):  
Surface Roughness ◽  
Fractal Dimension ◽  
Fractal Analysis ◽  
Fractal Geometry ◽  
Host Rock ◽  
Bouguer Anomaly ◽  
Research Area ◽  
Density Difference ◽  
Optimal Density

In exploration geophysics the main and initial aim is to determine density of under-research goals which have certain density difference with the host rock. Therefore, we state a method in this paper to determine the density of bouguer plate, the so-called variogram method based on fractal geometry. This method is based on minimizing surface roughness of bouguer anomaly. The fractal dimension of surface has been used as surface roughness of bouguer anomaly. Using this method, the optimal density of Charak area insouth of Hormozgan province can be determined which is 2/7 g/cfor the under-research area. This determined density has been used to correct and investigate its results about the isostasy of the studied area and results well-coincided with the geology of the area and dug exploratory holes in the text area

Determination of the Probability Distribution of the Mean Sound Level

2010 ◽  
Vol 35 (4) ◽  
pp. 543-550 ◽  
Author(s):  
Wojciech Batko ◽  
Bartosz Przysucha
Keyword(s):  
Probability Distribution ◽  
Probability Distribution Function ◽  
Mean Value ◽  
Sound Level ◽  
Function Form ◽  
Noise Levels ◽  
Logarithmic Mean ◽  
The Mean ◽  
Estimation Of Uncertainty

AbstractAssessment of several noise indicators are determined by the logarithmic mean <img src="/fulltext-image.asp?format=htmlnonpaginated&src=P42524002G141TV8_html\05_paper.gif" alt=""/>, from the sum of independent random resultsL1;L2; : : : ;Lnof the sound level, being under testing. The estimation of uncertainty of such averaging requires knowledge of probability distribution of the function form of their calculations. The developed solution, leading to the recurrent determination of the probability distribution function for the estimation of the mean value of noise levels and its variance, is shown in this paper.

MODIFIKASI MODEL PEMBELAJARAN TEAM ASSISTED INDIVIDUALIZATION DENGAN STRATEGI PEMBELAJARAN TUGAS DAN PAKSA

2019 ◽  
Vol 2 ◽  
Author(s):  
Lea Christy Restu Kinasih ◽  
Dewi Fatimah ◽  
Veranica Julianti
Keyword(s):  
Cooperative Learning ◽  
Learning Strategies ◽  
Learning Process ◽  
Learning Model ◽  
Learning Models ◽  
Classroom Learning ◽  
Quality Of Learning ◽  
The Given

The selection and determination of appropriate learning strategies can improve the results to be obtained from the application of classroom learning models. This writing aims to discipline students to develop individual abilities of students to be more active in the learning process and improve the quality of learning. The learning process in Indonesia in general only uses conventional learning models that make students passive and undeveloped. In order for the quality of learning to increase, the Team Assisted Individualization learning model is combined with the task learning and forced strategies. The Team Assisted Individualization cooperative learning model is one of the cooperative learning models that combines learning individually and in groups. Meanwhile, task and forced learning strategies are strategies that focus on giving assignments that require students to complete them on time so that the learning process can run effectively. Students are required to do assignments according to the given deadline. This makes students become familiar with the tasks given by the teacher. Combining or modifying the learning model of the assisted individualization team with forced and forced learning strategies is expected to be able to make students more active, disciplined, independent, creative in learning and responsible for the tasks assigned. Therefore this method of incorporation is very necessary in the learning process and can be applied to improve the quality of learning in schools.

MANUFACTURE INVESTIGATION OF CARTRIDGE WITH BOTTOM-MOST PART FLANGE BY DIRECT EXTRUSION WITH COUNTERPUNCH. REPORT 13. DETERMINATION OF DEFORMED STATE UNDER STRAITENED EXTRUSION IN FOURTH CENTRAL AREA OF PLASTIC DEFORMATION

2020 ◽  
Vol 0 (4) ◽  
pp. 43-51
Author(s):  
A. L. Vorontsov ◽  
◽  
I. A. Nikiforov ◽  
Keyword(s):  
Plastic Deformation ◽  
Plastic Flow ◽  
Central Area ◽  
Direct Extrusion ◽  
Deformed State ◽  
Cumulative Deformation ◽  
The Given ◽  
General Method

Formulae have been obtained that are necessary to calculate cumulative deformation in the process of straitened extrusion in the central area closed to the working end of the counterpunch. The general method of plastic flow proposed by A. L. Vorontsov was used. The obtained formulae allow one to determine the deformed state of a billet in any point of the given area. The formulae should be used to take into account the strengthening of the extruded material.

Influence of a chemical preparation of triazole50% cs on sowing the winter wheat against rust

2020 ◽  
Vol 3 (9) ◽  
pp. 231-233
Author(s):  
AliyevSh.K. ◽  
TuychiyevI.U ◽  
Karimov N ◽  
Umaraliev.M.I
Keyword(s):  
Winter Wheat ◽  
Field Experiments ◽  
Yellow Rust ◽  
Biological Efficiency ◽  
Chemical Preparation ◽  
Seed Growth ◽  
Biological Farming ◽  
The Given ◽  
Farming Efficiency

The article is focused on the data of the carried works on studying biological efficiency of fungi Triazole 50% on sowing the winter wheat against yellow rust as well as on the height, development and fertility of the wheat. On May 5, 2019 from 9 to 10 o’clock under the temperature 21-23 field experiments of Triazol 50% CS manufactured by the firm “Agroximstar” (Uzbekistan) were carried out on winter wheat as a protector of seeds of winter wheat of Pervitsa sort against the disease of yellow rustin the irrigated conditions in an experimental field of the Institute “Istiklal” of Andijan district of Andijan region. The aim of the given research is to study biological-farming efficiency and determination of optimal norms of preparation expenses and to study the influence of fungicide on the height and development as well as on the fertility of the wheat. The received data showed that the preparation Triazole 50% CS effected on the pathogen of yellow rust favorably and besides that it didn’t effect on seed growth and energy of growth negatively.

Sign in / Sign up

Export Citation Format

Share Document