Mechanical and Thermal Properties of Magnesia Binder Based on Natural and Technogenic Raw Materials

2021 ◽  
Vol 320 ◽  
pp. 181-185
Author(s):  
Elvija Namsone ◽  
Genadijs Sahmenko ◽  
Irina Shvetsova ◽  
Aleksandrs Korjakins
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Raw Materials ◽  
High Strength ◽  
Strength Properties ◽  
Waste Materials ◽  
Mechanical And Thermal Properties ◽  
Experimental Part ◽  
Technogenic Raw Materials ◽  
Caustic Magnesia

Because of low calcination temperature, magnesia binders are attributed as low-CO2 emission materials that can benefit the environment by reducing the energy consumption of building sector. Portland cement in different areas of construction can be replaced by magnesia binder which do not require autoclave treatment for hardening, it has low thermal conductivity and high strength properties. Magnesium-based materials are characterized by decorativeness and ecological compatibility.The experimental part of this research is based on the preparation of magnesia binders by adding raw materials and calcinated products and caustic magnesia. The aim of this study was to obtain low-CO2 emission and eco-friendly material using local dolomite waste materials, comparing physical, mechanical, thermal properties of magnesium binders.

Magnesium-Based Binders and its Materials

2020 ◽  
Vol 850 ◽  
pp. 305-310
Author(s):  
Elvija Namsone ◽  
Irina Shvetsova ◽  
Genadijs Sahmenko ◽  
Aleksandrs Korjakins
Keyword(s):  
Thermal Properties ◽  
Energy Consumption ◽  
Magnesium Oxide ◽  
Experimental Research ◽  
Raw Materials ◽  
Research Work ◽  
Waste Materials ◽  
Mechanical And Thermal Properties ◽  
Binding Material ◽  
Caustic Magnesia

The experimental research work is dedicated to magnesium-based binders. Two types of magnesium oxide were added in the compositions of binders – caustic magnesia and raw materials and calcinated products. Dolomite waste material (dolomite powder) from three quarries (two in Latvia, one in Russia) was tested. Magnesium-based binders are described as low-CO2 emission materials, helping to reduce the energy consumption in building sector. The aim of this study is to investigate the possibility to obtain eco-friendly, low-CO2 emission binding material from local dolomite waste materials and research the physical, mechanical and thermal properties of obtained samples.

Hot-Pressed AlN/BN Composite with Excellent Mechanical and Thermal Properties

2007 ◽  
Vol 544-545 ◽  
pp. 761-764 ◽  
Author(s):  
Takafumi Kusunose ◽  
Myoung Jae Cho ◽  
Tohru Sekino ◽  
Koichi Niihara
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Boric Acid ◽  
Hot Pressing ◽  
Composite Powder ◽  
High Strength ◽  
High Thermal Conductivity ◽  
Mechanical And Thermal Properties ◽  
Homogeneous Dispersion

In order to give machinability to hard and brittle AlN ceramics, the homogeneous dispersion of fine BN particles into AlN matrix was investigated. The AlN/BN nanocomposite was fabricated by hot-pressing AlN-BN composite powder, which was prepared by reducing and heating AlN particles containing a mixture of boric acid, urea and carbon. The nanocomposite containing 20 vol.% BN showed high strength, machinability and relatively high thermal conductivity.

scholarly journals An all-natural bioinspired structural material for plastic replacement

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Qing-Fang Guan ◽  
Huai-Bin Yang ◽  
Zi-Meng Han ◽  
Zhang-Chi Ling ◽  
Shu-Hong Yu
Keyword(s):  
Thermal Properties ◽  
Structural Material ◽  
High Performance ◽  
Coefficient Of Thermal Expansion ◽  
Raw Materials ◽  
High Strength ◽  
Structural Materials ◽  
Mechanical And Thermal Properties ◽  
Good Thermal Stability ◽  
Assembly Method

Abstract Petroleum-based plastics are useful but they pose a great threat to the environment and human health. It is highly desirable yet challenging to develop sustainable structural materials with excellent mechanical and thermal properties for plastic replacement. Here, inspired by nacre’s multiscale architecture, we report a simple and efficient so called “directional deforming assembly” method to manufacture high-performance structural materials with a unique combination of high strength (281 MPa), high toughness (11.5 MPa m1/2), high stiffness (20 GPa), low coefficient of thermal expansion (7 × 10−6 K−1) and good thermal stability. Based on all-natural raw materials (cellulose nanofiber and mica microplatelet), the bioinspired structural material possesses better mechanical and thermal properties than petroleum-based plastics, making it a high-performance and eco-friendly alternative structural material to substitute plastics.

scholarly journals Bio-based rigid polyurethane foam prepared from apricot stone shell-based polyol for thermal insulation application – Part 2: Morphological, mechanical, and thermal properties

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 6080-6094
Author(s):  
Muhammed Said Fidan ◽  
Murat Ertaş
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Thermogravimetric Analysis ◽  
Polyurethane Foam ◽  
Flame Retardants ◽  
Compressive Modulus ◽  
Cell Diameter ◽  
Mechanical And Thermal Properties ◽  
Rigid Polyurethane Foam

The procedure for the liquefaction of apricot stone shells was reported in Part 1. Part 2 of this work determines the morphological, mechanical, and thermal properties of the bio-based rigid polyurethane foam composites (RPUFc). In this study, the thermal conductivity, compressive strength, compressive modulus, thermogravimetric analysis, flammability tests (horizontal burning and limited oxygen index (LOI)) in the flame retardants), and scanning electron microscope (SEM) (cell diameter in the SEM) tests of the RPUFc were performed and compared with control samples. The results showed the thermal conductivity (0.0342 to 0.0362 mW/mK), compressive strength (10.5 to 14.9 kPa), compressive modulus (179.9 to 180.3 kPa), decomposition and residue in the thermogravimetric analysis (230 to 491 °C, 15.31 to 21.61%), UL-94 and LOI in the flame retardants (539.5 to 591.1 mm/min, 17.8 to 18.5%), and cell diameter in the SEM (50.6 to 347.5 μm) of RPUFc attained from liquefied biomass. The results were similar to those of foams obtained from industrial RPUFs, and demonstrated that bio-based RPUFc obtained from liquefied apricot stone shells could be used as a reinforcement filler in the preparation of RPUFs, specifically in construction and insulation materials. Moreover, liquefied apricot stone shell products have potential to be fabricated into rigid polyurethane foam composites.

A Novel Packing Hollow Dodecahedron Model to Study the Mechanical and Thermal Properties of Stocastic Metallic Foams

2021 ◽  
Author(s):  
Rui Dai ◽  
Beomjin Kwon ◽  
Qiong Nian
Keyword(s):  
Thermal Properties ◽  
Physical Properties ◽  
Three Dimensional ◽  
Weight Ratio ◽  
High Strength ◽  
Specific Area ◽  
Deposition Process ◽  
Metallic Foam ◽  
Thermal Testing ◽  
Mechanical And Thermal Properties

Abstract Stochastic foam with hierarchy order pore structure possesses distinguished physical properties such as high strength to weight ratio, super lightweight, and extremely large specific area. These exceptional properties make stochastic foam as a competitive material for versatile applications e.g., heat exchangers, battery electrodes, automotive components, magnetic shielding, catalyst devices and etc. Recently, the more advanced hollow cellular (shellular) architectures with well-developed structure connections are studied and expected to surpass the solid micro/nanolattices. However, in terms of theoretical predicting and studying of the cellular foam architecture, currently no systematic model can be utilized to accurately capture both of its mechanical and thermal properties especially with hollow struts due to complexity induced by its stochastic and highly reticulate nature. Herein, for the first time, a novel packing three-dimensional (3D) hollow dodecahedron (HPD) model is proposed to simulate the cellular architecture. An electrochemical deposition process is utilized to manufacture the metallic foam with hollow struts. Mechanical and thermal testing of the as-manufactured foams are carried out to compare with the HPD model. HPD model is proved to accurately capture both the topology and the physical properties of stochastic foam at the similar relative density. Particularly, the proposed model makes it possible to readily access and track the physical behavior of stochastic foam architecture. Accordingly, this work will also offer inspiration for designing an efficient foam for specific applications.

Nanomaterials and Nanocomposites Thermal and Mechanical Properties Modelling

2019 ◽  
pp. 234-256 ◽  
Author(s):  
Siddhartha Kosti
Keyword(s):  
Thermal Properties ◽  
Structural Properties ◽  
Base Material ◽  
High Strength ◽  
Mechanical And Thermal Properties ◽  
Thermal And Mechanical Properties ◽  
Weight Percentage ◽  
Structural Applications ◽  
Glass Frp ◽  
Selection Of

This chapter deals with the modelling of nanomaterial and nanocomposite mechanical and thermal properties. Enrichment in the technology requires materials having higher thermal properties or higher structural properties. Nanomaterials and nanocomposites can serve this purpose accurately for aerospace or thermal applications and structural applications respectively. The thermal system requires materials having high thermal conductivity while structural system requires materials having high strength. Selection of the material for particular application is very critical and requires knowledge and experience. Al, Cu, TiO2, Al2O3, etc. are considered for thermal applications while epoxy-glass, FRP, etc. are considered for structural applications. Modelling of these nanomaterials and nanocomposites is done with the help of different mathematical models available in the literature. Results show that addition of the nanoparticle/composite in the base material can enhance the thermal and structural properties. Results also show that amount of weight percentage added also affects the properties.

Nanomaterials and Nanocomposites Thermal and Mechanical Properties Modelling

2021 ◽  
pp. 180-199
Author(s):  
Siddhartha Kosti
Keyword(s):  
Thermal Properties ◽  
Structural Properties ◽  
Base Material ◽  
High Strength ◽  
Mechanical And Thermal Properties ◽  
Thermal And Mechanical Properties ◽  
Weight Percentage ◽  
Structural Applications ◽  
Glass Frp ◽  
Selection Of

This chapter deals with the modelling of nanomaterial and nanocomposite mechanical and thermal properties. Enrichment in the technology requires materials having higher thermal properties or higher structural properties. Nanomaterials and nanocomposites can serve this purpose accurately for aerospace or thermal applications and structural applications respectively. The thermal system requires materials having high thermal conductivity while structural system requires materials having high strength. Selection of the material for particular application is very critical and requires knowledge and experience. Al, Cu, TiO2, Al2O3, etc. are considered for thermal applications while epoxy-glass, FRP, etc. are considered for structural applications. Modelling of these nanomaterials and nanocomposites is done with the help of different mathematical models available in the literature. Results show that addition of the nanoparticle/composite in the base material can enhance the thermal and structural properties. Results also show that amount of weight percentage added also affects the properties.

scholarly journals Physical, mechanical and thermal properties of Crushed Sand Concrete containing Rubber Waste

2018 ◽  
Vol 149 ◽  
pp. 01076
Author(s):  
Guendouz Mohamed ◽  
Boukhelkhal Djamila
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Flexural Strength ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Bulk Density ◽  
Mechanical And Thermal Properties ◽  
The Past ◽  
Rubber Waste ◽  
And Performance

Over the past twenty years, the rubber wastes are an important part of municipal solid waste. This work focuses on the recycling of rubber waste, specifically rubber waste of used shoes discharged into the nature and added in the mass of crushed sand concrete with percentage (10%, 20%, 30% and 40%). The physical (workability, fresh density), mechanical (compressive and flexural strength) and thermal (thermal conductivity) of different crushed sand concrete made are analyzed and compared to the respective controls. The use of rubber waste in crushed sand concrete contributes to reduce the bulk density and performance of sand concrete. Nevertheless, the use of rubber aggregate leads to a significant reduction in thermal conductivity, which improves the thermal insulation of crushed sand concrete.

scholarly journals A Study on the Thermal Properties of High-Strength Concrete Containing CBA Fine Aggregates

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1493 ◽  
Author(s):  
In-Hwan Yang ◽  
Jihun Park
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Ultrasonic Velocity ◽  
High Strength Concrete ◽  
High Strength ◽  
Unit Weight ◽  
Test Results ◽  
Strength Concrete ◽  
Fine Aggregates

The thermal conductivity of concrete is a key factor for efficient energy consumption in concrete buildings because thermal conductivity plays a significant role in heat transfer through concrete walls. This study investigated the effects of replacing fine aggregates with coal bottom ash (CBA) and the influence of curing age on the thermal properties of high-strength concrete with a compressive strength exceeding 60 MPa. The different CBA aggregate contents included 25%, 50%, 75%, and 100%, and different curing ages included 28 and 56 days. For concrete containing CBA fine aggregate, the thermal and mechanical properties, including the unit weight, thermal conductivity, compressive strength, and ultrasonic velocity, were measured. The experimental results reveal that the unit weight and thermal conductivity of the CBA concrete were highly dependent on the CBA content. The unit weight, thermal conductivity, and compressive strength of the concrete decreased as the CBA content increased. Relationships between the thermal conductivity and the unit weight, thermal conductivity and compressive strength of the CBA concrete were proposed in the form of exponential functions. The equations proposed in this study provided predictions that were in good agreement with the test results. In addition, the test results show that there was an approximately linear relationship between the thermal conductivity and ultrasonic velocity of the CBA concrete.

Sign in / Sign up

Export Citation Format

Share Document