Pedicle Screw Loosening Prediction in Patients with Degenerative Diseases of Lumbar Spine Using Bone Density Measured in Hounsfield Units

2016 ◽  
Vol 04 (01) ◽  
Author(s):  
Andrey Bokov
2011 ◽  
Vol 11 (10) ◽  
pp. S96-S97
Author(s):  
Joel Boerckel ◽  
Liz Peters ◽  
Lalissie Merga ◽  
Tamkeenat Syed ◽  
Mona Arabshahi ◽  
...  

Author(s):  
Bryant Chu ◽  
Jeremi Leasure ◽  
Dimitriy Kondrashov

Bone mineral density (BMD) has been identified as a major factor in spine construct strength, with failures resulting in pedicle screw loosening and pullout2. Computed tomography (CT) scans have been shown to effectively measure BMD1,4. Previous research has utilized this linear correlation of CT Hounsfield Units (HU) to BMD in order to determine BMD as a function of anatomic location within cervical vertebrae1; however, the lumbar spine has not yet been reported on. The goal of this study was to describe BMD of anatomical regions within lumbar vertebrae using the correlation between HU and BMD. It was hypothesized that posterior elements of the spine would exhibit significantly different BMD than the vertebral body. This was tested through means comparison of BMD for each anatomical region.


2010 ◽  
Vol 2 (1) ◽  
pp. 3 ◽  
Author(s):  
Marc Röllinghoff ◽  
Klaus Schlüter-Brust ◽  
Daniel Groos ◽  
Rolf Sobottke ◽  
Joern William-Patrick Michael ◽  
...  

In the treatment of multilevel degenerative disorders of the lumbar spine, spondylodesis plays a controversial role. Most patients can be treated conservatively with success. Multilevel lumbar fusion with instrumentation is associated with severe complications like failed back surgery syndrome, implant failure, and adjacent segment disease (ASD). This retrospective study examines the records of 70 elderly patients with degenerative changes or instability of the lumbar spine treated between 2002 and 2007 with spondylodesis of more than two segments. Sixty-four patients were included; 5 patients had died and one patient was lost to follow-up. We evaluated complications, clinical/radiological outcomes, and success of fusion. Flexion-extension and standing X-rays in two planes, MRI, and/or CT scans were obtained pre-operatively. Patients were assessed clinically using the Oswestry disability index (ODI) and a Visual Analogue Scale (VAS). Surgery performed was dorsolateral fusion (46.9%) or dorsal fusion with anterior lumbar interbody fusion (ALIF; 53.1%). Additional decompression was carried out in 37.5% of patients. Mean follow-up was 29.4±5.4 months. Average patient age was 64.7±4.3 years. Clinical outcomes were not satisfactory for all patients. VAS scores improved from 8.6±1.3 to 5.6±3.0 pre- to post-operatively, without statistical significance. ODI was also not significantly improved (56.1±22.3 pre- and 45.1±26.4 post-operatively). Successful fusion, defined as adequate bone mass with trabeculation at the facets and transverse processes or in the intervertebral segments, did not correlate with good clinical outcomes. Thirty-five of 64 patients (54%) showed signs of pedicle screw loosening, especially of the screws at S1. However, only 7 of these 35 (20%) complained of corresponding back pain. Revision surgery was required in 24 of 64 patients (38%). Of these, indications were adjacent segment disease (16 cases), pedicle screw loosening (7 cases), and infection (one case). At follow-up of 29.4 months, patients with radiographic ASD had worse ODI scores than patients without (54.7 vs. 36.6; P less than 0.001). Multilevel fusion for degenerative disease still has a high rate of complications, up to 50%. The problem of adjacent segment disease after fusion surgery has not yet been solved. This study underscores the need for strict indication guidelines to perform lumbar spine fusion of more than two levels.


2020 ◽  
Vol 49 (2) ◽  
pp. E10
Author(s):  
Fei Xu ◽  
Da Zou ◽  
Weishi Li ◽  
Zhuoran Sun ◽  
Shuai Jiang ◽  
...  

OBJECTIVEThe authors aimed to compare the efficacy of lumbar vertebral body Hounsfield units (HUs) and pedicle HUs at predicting pedicle screw loosening.METHODSThe authors retrospectively assessed 143 patients with L3–5 instrumentation. The patients were classified into one of two groups based on the status of their L3 screws (a screw loosening group or a control group). The pedicle HUs and vertebral HUs of L3 were measured using preoperative lumbar CT scans, and the pedicle HUs were measured in two ways: by excluding or by including cortical bone.RESULTSThe screw loosening rate was 20.3% (n = 29/143) at the 12-month follow-up. The vertebral body HUs and pedicle HUs in the screw loosening group were lower than those in the control group (vertebral body group: 98.6 HUs vs 121.4 HUs, p < 0.001; pedicle excluding cortical bone: 208.9 HUs vs 290.5 HUs, p = 0.002; pedicle including cortical bone: 249.4 HUs vs 337.5 HUs, p < 0.001). The pedicle HUs tended to have a higher area under the receiver operating characteristic curve value in predicting screw loosening, compared with that of vertebral body HUs, but the difference was not statistically significant (p > 0.05). Among patients with low vertebral body HUs of ≤ 130, the loosening rate was much lower in patients with pedicle HUs of ≤ 340 than in those with pedicle HUs of > 340 (31.0% vs 13.0%, respectively; p < 0.05).CONCLUSIONSVertebral body HUs alone are insufficient to accurately evaluate the risk of pedicle screw loosening. Therefore, it is important to collect both the pedicle HU and vertebral body HU measurements for surgical planning.


2019 ◽  
Vol 19 (02) ◽  
pp. 1940024
Author(s):  
PO-YI LIU ◽  
SHENG-CHIH LIN ◽  
PO-LIANG LAI ◽  
CHUN-LI LIN

Pedicle screw loosening at the bone–screw interface is the main complication in pedicle screw fixation. The transpedicular polymethylmethacrylate screw augmentation technique has recently become the general technique used to re-operatively overcome pedicle screw loosening. This study investigates the fatigue resistance of PMMA bone cement augmentation. Twenty-seven porcine thoracic vertebral bodies were collected. The BMD was measured using dual X-ray absorptiometry. Each vertebral body was instrumented with one pedicle screw and mounted in a material testing system. Fatigue testing was performed by implementing a cranio-caudal sinusoidal, cyclic (5[Formula: see text]Hz) load. This study shows that transpedicular pedicle screw augmentation with PMMA exhibits similar fatigue resistance as traditional pedicle screw implantation. However, in histomophometrical analysis, the transpedicular pedicle screw augmentation with PMMA has greater anti-deformation capacity than traditional pedicle screw implantation. Transpedicular pedicle screw augmentation with PMMA improves more screw holding power to prevent pedicle screw loosening.


2018 ◽  
Vol 23 (5) ◽  
pp. 734-738 ◽  
Author(s):  
Yusuke Sakai ◽  
Shota Takenaka ◽  
Yohei Matsuo ◽  
Hiroyasu Fujiwara ◽  
Hirotsugu Honda ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document