scholarly journals Assessment of the pharmaceutical equivalence and in vitro dissolution studies of amlodipine tablets marketed in Northern Nigeria

2021 ◽  
Vol 17 (2) ◽  
pp. 200-207
Author(s):  
Ponjul Dandam ◽  
Jennifer D. Audu-Peter
Keyword(s):  
Hardness Test ◽  
Cost Effective ◽  
Poor Quality ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
Pharmaceutical Equivalence ◽  
Drug Content ◽  
Effective Manner

The extensive supply of poor quality and/or counterfeit drug products in many developing countries has made it vital to frequently carry out suitable tests to assess bioequivalence (BE) in a cost-effective manner. This study was intended to assess the pharmaceutical equivalence and dissolution profile of amlodipine 5mg tablets marketed in Jos and Kaduna metropolis. Ten brands of Amlodipine 5mg tablets were obtained from different community pharmacies and evaluated for different quality control parameters such as percent drug content, friability, hardness, thickness, weight uniformity, disintegration time, and dissolution. The results showed that brands F and I failed the test for percent drug content while the rest of the brands passed it. In addition, all the brands passed the disintegrationand friability test while Brands C, F and I did not pass the hardness test. The dissolution profiles of all the brands were similar to the innovator brand at pH 6.8, whereas at pH 1.2, only four brands (B, E, H and I) had similar dissolution profile to the innovator. This study serves to justify for the assessment of in vitro parameters of commercially available amlodipine generics which may aid the prescribers’ decision making. Keywords: Amlodipine; Jos; Tablet properties, Dissolution profile

scholarly journals In vitro Pharmaceutical Equivalence Study of Three Brands of Atenolol Tablets Available in Bangladesh

2019 ◽  
Vol 18 (1) ◽  
pp. 43-48
Author(s):  
Rehana Begum ◽  
Md Zakir Sultan ◽  
Jakir Ahmed Chowdhury ◽  
Md Shah Amran
Keyword(s):  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
United States Pharmacopoeia ◽  
Dissolution Study ◽  
Pharmaceutical Equivalence ◽  
Similarity Factor ◽  
Difference Factor ◽  
Paddle Apparatus

The aim of the present work was to assess the pharmaceutical equivalence of three brands of atenolol (50 mg) tablets available in Bangladesh using in vitro dissolution study. The dissolution study was carried out using the paddle apparatus according to the guidelines of United States Pharmacopoeia (USP). The dissolution profiles of three locally manufactured atenolol tablets were determined and compared with the dissolution profile of atenolol tablet from innovator’s company. All samples attained more than 85% dissolution within 10 minutes. Mean dissolution values were employed to estimate difference factor (f1) and similarity factor (f2). Difference factor (f1) and similarity factor (f2) were used to assess in vitro bio-equivalency among the three brands. Other general quality assessment parameters such as hardness, friability and disintegration time were also determined. All brands complied with the official specifications for hardness, friability and disintegration time. The study indicated that all brands can be prescribed interchangeably. Dhaka Univ. J. Pharm. Sci. 18(1): 43-48, 2019 (June)

Formulation and Evaluation of Orally Disintegrating Tablets of Lamotrigine

2015 ◽  
Vol 8 (2) ◽  
pp. 2881-2888
Author(s):  
Sudarshan Singh ◽  
S S Shyale ◽  
P Karade
Keyword(s):  
Drug Release ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Croscarmellose Sodium

The aim of this study was to design orally disintegrating tablet (ODT) of Lamotrigine. It is an Antiepileptic drug which is widely used in epilepsy. It is also used in simple and complex partial seizures and secondary generalized tonic-clonic seizures. It is poorly water soluble drug (0.46 mg/ml). Thus, an attempt was made to enhance the water solubility by complexation with β-cyclodextrin (1:1 molar ratios). The orally disintegrating tablet of lamotrigine was prepared by direct compression method using different concentration of superdisintegrants such as Sodium starch glycollate, croscarmellose sodium by sublimating agent such as camphor. The formulations were evaluated for weight variation, hardness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies. The prepared tablets were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. The disintegration time for the complexed tablets prepared by different concentration of superdisintegrants was found to be in range of 32.54 ± 0.50 to 55.12 ± 0.57 sec and wetting time of the formulations was found to be in range of 28.47 ± 0.67 to 52.19 ± 0.72 sec. All the formulation showed almost 100 percent of drug release within 15 min. Among all the formulation F6 and F7 prepared with 18% croscarmellose sodium and camphor shows faster drug release, respectively 10 min, F6 gives good result for disintegration time, drug release, wetting time and friability. Further formulations were subjected to stability testing for 30 days at temperature of 40 ± 5 ºC/75 ± 5 %RH. Tablets showed no appreciable changes with respect to physical appearance, drug content, disintegration time and dissolution profiles. Results were statistically analyzed by one-way ANOVA at a p < 0.05. It was found that, the data at any point of time are significant at p < 0.05.

scholarly journals FORMULATION AND EVALUATION OF SUSTAINED RELEASE MATRIX TABLET OF LORNOXICAM BY DIRECT COMPRESSION METHOD

2021 ◽  
Vol 10 (5) ◽  
pp. 131-136
Author(s):  
Asim pasha ◽  
C N Somashekhar
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Prolonged Release ◽  
Matrix Tablet ◽  
Direct Compression ◽  
Dissolution Profile ◽  
Drug Content

The aim of the present work was to develop sustained release Lornoxicam matrix tablets with polymers like HPMC K15M, Ethyl cellulose, and Crospovidone as carriers in varying quantities. Direct compression was used to make matrix tablets. Various assessment parameters, such as hardness, friability, thickness, percent drug content, weight variation, and so on, were applied to the prepared formulations. In vitro dissolution studies were carried out for 24 hrs. The tablets were subjected to in-vitro drug release in (pH 1.2) for first 2 hrs. Then followed by (pH 6.8) phosphate buffer for next 22 hrs. And the results showed that among the six formulations FL3 showed good dissolution profile to control the drug release respectively. The drug and polymer compatibility were tested using FT-IR spectroscopy, which revealed that the drug was compatible with all polymers. It is also required to design an appropriate prolonged release formulation for Lornoxicam in order to maintain the drug's release. Hence by using the compatible polymers sustained release tablets were formulated and subjected for various types of evaluation parameters like friability, hardness, drug content and dissolution behaviour. Finally, the findings reveal that the prepared sustained release matrix tablets of lornoxicam have improved efficacy and patient compliance.

scholarly journals Enhancement of Solubility and Improvement of Dissolution Rate of Atorvastatin Calcium Prepared as Nanosuspension

2019 ◽  
Vol 28 (2) ◽  
pp. 46-57
Author(s):  
Ahmed H. Ali ◽  
Shaimaa N. Abd-Alhammid
Keyword(s):  
Particle Size ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Precipitation Method ◽  
Size Analysis ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
Atorvastatin Calcium ◽  
Freeze Dried

       Atorvastatin have problem of very slightly aqueous solubility (0.1-1 mg/ml). Nano-suspension is used to enhance it’s of solubility and dissolution profile. The aim of this study is to formulate Atorvastatin as a nano-suspension to enhance its solubility due to increased surface area of exposed for dissolution medium, according to Noyes-Whitney equation.         Thirty one formulae were prepared to evaluate the effect of ; Type of polymer, polymer: drug ratio, speed of homogenization, temperature of preparation and inclusion of co-stabilizer in addition to the primary one; using solvent-anti-solvent precipitation method under high power of ultra-sonication. In this study five types of stabilizers (TPGS, PVP K30, HPMC E5, HPMC E15, and Tween80) were used in three different concentrations 1:1, 1:0.75 and 1:0.5 for preparing of formulations. At the same time, tween80 and sodium lauryl sulphate have been added as a co-stabilizer.          Atorvastatin nano-suspensions were evaluated for particle size, PDI, zeta potential, crystal form and surface morphology. Finally, results of particle size analysis revealed reduced nano-particulate size to 81nm for optimized formula F18 with the enhancement of in-vitro dissolution profile up to 90% compared to 44% percentage cumulative release for the reference Atorvastatin calcium powder in 6.8 phosphate buffer media. Furthermore, saturation solubility of freeze dried Nano suspension showed 3.3, 3.8, and 3.7 folds increments in distilled water, 0.1N Hcl and 6.8 phosphate buffers, respectively. Later, freeze dried powder formulated as hard gelatin capsules and evaluated according to the USP specifications of the drug content and the disintegration time.        As a conclusion; formulation of poorly water soluble Atorvastatin calcium as nano suspension significantly improved the dissolution of the drug and enhances its solubility.

EFFECT OF DRUG TO B-CYCLODEXTRIN RATIO AND METHOD OF COMPLEXATION IN THE DEVELOPMENT OF B-CYCLODEXTRIN INCLUSION COMPLEX OF OFLOXACIN

INDIAN DRUGS ◽  
2013 ◽  
Vol 50 (12) ◽  
pp. 34-40
Author(s):  
M Panchpuri ◽  
◽  
D Singh ◽  
A Semalty ◽  
M. Semalty
Keyword(s):  
Inclusion Complex ◽  
In Vitro Dissolution ◽  
Molar Ratio ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Dissolution Study ◽  
Drug Content ◽  
Kneading Method ◽  
Made In

Ofloxacin, a second generation fluoroquinolone, shows poor aqueous solubility and dissolution profile. Thus, ofloxacin–β-cyclodextrin complexes were prepared to improve its dissolution by imparting an environment of improved hydrophilicity. Ofloxacin was complexed with β-cyclodextrin (in 1:1 and 1:2 molar ratio) by two different methods namely, solvent evaporation and kneading method. These inclusion complexes were evaluated for solubility, drug content, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X ray powder diffraction (XRPD) and in vitro dissolution study. The highest drug content (35.45%) was found in complex made by kneading method (OK1:1) in 1:1 molar ratio. All the complexes OSE1:1, OSE1:2, OK1:1, OK1:2 were found to be showing rough and porous surface morphology in SEM. Solubility as well as the dissolution of the complexes was found to be improved. Complex prepared by kneading method in 1:1 molar ratio (OK1:1) showed a marked improvement in percent drug release (88.94%) than that of pure drug (54.22%) at the end of 1 hour in dissolution study. FTIR, DSC and XRPD data confirmed the formation of inclusion complex. It was concluded that the complex made in 1:1 molar ratio (irrespective of the method) showed better solubility and dissolution profile as compared to complex made in 1:2 molar ratio.

Statistical assessment of in vitro drug release kinetics and quality evaluation of desloratadine orally disintegrating generic tablets available in Bangladesh

2020 ◽  
pp. 174113432094775
Author(s):  
Madhabi Lata Shuma ◽  
Shimul Halder
Keyword(s):  
Release Kinetics ◽  
The United States ◽  
Quality Parameters ◽  
In Vitro Dissolution ◽  
Dissolution Behavior ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Orally Disintegrating Tablets

The objective of the present study was to compare the in vitro equivalence of different orally disintegrating tablets (ODT) of Desloratadine (DES) available in Bangladesh pharmaceutical market with the reference brand. The in vitro dissolution study was carried out using the United States Pharmacopoeia (USP) paddle method and a comparative study were also carried out with the reference brand. Other pharmacopoeial and non-pharmacopoeial quality assessment parameters including hardness, friability, water absorption ratio, and disintegration time etc. were also evaluated. From the results of the dissolution profile of the commercially available products, it found majority of the products didn’t exhibited compendial requirements in dissolution behavior to the reference brand with model-independent approach ( f2 > 50, f1 < 15) and showed statistically significant differences. Additionally, the data of different physical quality parameters revealed that all commercial products complied with the official specifications. From these findings, it could be suggested that the DES-ODT formulations’ available in the Bangladesh market could be prescribed; however additional experiments might require to clarify the interchangeability among the products.

scholarly journals Formulation design, optimization & in vitro evaluation of novel orodissolving tablets of efavirenz for hiv infections

2015 ◽  
Vol 49 (3) ◽  
pp. 173-180
Author(s):  
T Ayyappan ◽  
C Poojitha ◽  
T Vetrichelvan
Keyword(s):  
Drug Release ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Sodium Starch Glycolate ◽  
Weight Variation ◽  
Wetting Time

In the present work, orodissolving tablets of Efavirenz were prepared by direct compression method with a view to enhance patient compliance. A 23 full factorial design was applied to investigate the combined effect of three formulation variables. Amount of crospovidone, croscarmellose sodium and sodium starch glycolate were used as superdisintegrant material along with direct compressible mannitol to enhance mouth feel. The prepared batches of tablets were evaluated for hardness, friability, weight variation, disintegration time, wetting time, drug content and in-vitro dissolution studies. Based on wetting time, disintegration time, the formulation containing crospovidone (5% w/v), carscarmellose sodium (5% w/v) and sodium starch glycolate (8% w/v) was found to be promising and tested for in-vitro drug release pattern (in 0.1 N HCl), short term stability and drug- superdisintegrants interaction. Surface response plots are presented to graphically represent the effect of independent variables (conc. of superdisintegrants) on the in-vitro dissolution time. The validity of the generated mathematical model was tested by preparing extra-design check point formulation. The formulation showed nearly faster drug release compared to the conventional commercial tablet formulation. Stability studies on the optimized formulation indicated that there was no significant change found in physical appearance, hardness, disintegration time, drug content and in-vitro drug release. DOI: http://dx.doi.org/10.3329/bjsir.v49i3.22131 Bangladesh J. Sci. Ind. Res. 49(3), 173-180, 2014

scholarly journals DESIGN, DEVELOPMENT AND EVALUATION OF MOUTH DISSOLVING TABLETS OF TOFACITINIB CITRATE

2022 ◽  
pp. 238-245
Author(s):  
MEGHANA RAYKAR ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Release ◽  
Stability Study ◽  
In Vitro Dissolution ◽  
Design Development ◽  
Disintegration Time ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Bulk Drug

Objective: This study aims to Formulate Mouth Dissolving Tablets (MDTs) of Tofacitinib Citrate with the increase in bioavailability and patient compliance. Methods: Mouth Dissolving Tablets (MDTs) of Tofacitinib Citrate were developed by full factorial design at 32levelsand prepared by direct compression method using super integrants like sodium starch glycolate, Ludiflash. The tablets were compressed into compacts on a 10 station tablet machine. The bulk drug was characterised by determining, MP, Solubility, pH and FTIR spectra. Results: The weight variation, hardness and diameter, thickness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies, and stability study, tablet thickness, weight variation and drug content post compression parameters remained consistent and reproducible. All the formulations showed, almost 100 percent of drug release within 75 min. Formulations F1, F2 and F3 were prepared with 5 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F1<F2<F3. Formulations F4, F5 and F6 were prepared with 10 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F4<F5<F6. Formulations F7, F8 and F9 were prepared with 15 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F7<F8<F9. Conclusion: It is concluded that the amount of superdisintegrants decreases disintegration time of tablets, decreases wetting time, increases the cumulative % drug release causes better absorption.

scholarly journals A Comparative Study on In-vitro Quality Control Parameters of Different Brands of Loratadine Tablets Commercially Available in Bangladesh

2021 ◽  
pp. 50-58
Author(s):  
Rosy Fatema ◽  
Sumaiya Khan ◽  
A. S. M. Roknuzzaman ◽  
Ramisa Anjum ◽  
Nishat Jahan
Keyword(s):  
Research Work ◽  
Drug Market ◽  
Quality Standard ◽  
In Vitro Dissolution ◽  
Active Principle ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
Weight Variation ◽  
Local Companies

Loratadine, a second generation H1-receptor antagonist, works by blocking the action of histamine and is widely prescribed for itching, runny nose, watery eyes, and sneezing from "hay fever" and other allergic conditions. To ensure quality the main requirements for a medicinal product are safety, potency, efficacy and stability. This research work aimed to compare and assess the quality levels of different local brands of loratadine tablets available in the drug market of Bangladesh. Six different brands of loratadine 10 mg tablet manufactured by the local companies were used for the analysis. The evaluation was performed through the determination of weight variation, hardness, friability, percent potency, disintegration time, and dissolution profile in accordance with USP-NF specifications. All brands showed acceptable weight variation and % friability. The percent potency for tested samples by UV method ranges from 97.02%-108%, showing none of the brands contains less than 90% of the active principle as per the specification. The result of the physical and chemical studies, such as in-vitro dissolution, disintegration, hardness, etc., has been found to differ but lie within the specified limit. After analyzing the data obtained from the tests, it can be claimed that loratadine 10 mg tablets manufactured and marketed by several local companies in Bangladesh meet the quality standard required to achieve the desired therapeutic outcomes.

scholarly journals Formulation and Evaluation of Loperamide HCl Oro Dispersible Tablets

2020 ◽  
Vol 13 (5) ◽  
pp. 100
Author(s):  
Blasco Alejandro ◽  
Torrado Guillermo ◽  
Peña M Ángeles
Keyword(s):  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Biomedical Sciences ◽  
Disintegration Time ◽  
Weight Variation ◽  
Orally Disintegrating Tablets ◽  
Wetting Time ◽  
Percentage Of Water Absorption ◽  
Hostile Environments

This work proposes the design of novel oral disintegrating tablets (ODTs) of loperamide HCl with special emphasis on disintegration and dissolution studies. The main goal was augmenting the adherence to treatment of diseases which happen with diarrhea in soldiers who are exposed to diverse kinds of hostile environments. Optimized orally disintegrating tablets were prepared by the direct compression method from galenic development to the industrial scale technique, thanks to strategic and support actions between the Spanish Army Force Lab and the Department of Biomedical Sciences (UAH). The results show that loperamide HCl ODT offers a rapid beginning of action and improvement in the bioavailability of poorly absorbed drugs. The manufactured ODTs complied with the pharmacopeia guidelines regarding hardness, weight variation, thickness, friability, drug content, wetting time, percentage of water absorption, disintegration time, and in vitro dissolution profile. Drug compatibility with excipients was checked by DSC, FTIR, and SEM studies.

Sign in / Sign up

Export Citation Format

Share Document