scholarly journals Antarctic ice sheet fertilises the Southern Ocean

2014 ◽  
Vol 11 (10) ◽  
pp. 2635-2643 ◽  
Author(s):  
R. Death ◽  
J. L. Wadham ◽  
F. Monteiro ◽  
A. M. Le Brocq ◽  
M. Tranter ◽  
...  
Keyword(s):  
Southern Ocean ◽  
Ice Sheet ◽  
Ocean Model ◽  
Coastal Sediments ◽  
Global Ocean ◽  
Iron Cycling ◽  
Antarctic Ice Sheet ◽  
Significant Control ◽  
Subglacial Meltwater ◽  
The Impact

Abstract. Southern Ocean (SO) marine primary productivity (PP) is strongly influenced by the availability of iron in surface waters, which is thought to exert a significant control upon atmospheric CO2 concentrations on glacial/interglacial timescales. The zone bordering the Antarctic Ice Sheet exhibits high PP and seasonal plankton blooms in response to light and variations in iron availability. The sources of iron stimulating elevated SO PP are in debate. Established contributors include dust, coastal sediments/upwelling, icebergs and sea ice. Subglacial meltwater exported at the ice margin is a more recent suggestion, arising from intense iron cycling beneath the ice sheet. Icebergs and subglacial meltwater may supply a large amount of bioavailable iron to the SO, estimated in this study at 0.07–0.2 Tg yr−1. Here we apply the MIT global ocean model (Follows et al., 2007) to determine the potential impact of this level of iron export from the ice sheet upon SO PP. The export of iron from the ice sheet raises modelled SO PP by up to 40%, and provides one plausible explanation for seasonally very high in situ measurements of PP in the near-coastal zone. The impact on SO PP is greatest in coastal regions, which are also areas of high measured marine PP. These results suggest that the export of Antarctic runoff and icebergs may have an important impact on SO PP and should be included in future biogeochemical modelling.

scholarly journals Antarctic Ice Sheet fertilises the Southern Ocean

2013 ◽  
Vol 10 (7) ◽  
pp. 12551-12570 ◽  
Author(s):  
R. Death ◽  
J. L. Wadham ◽  
F. Monteiro ◽  
A. M. Le Brocq ◽  
M. Tranter ◽  
...  
Keyword(s):  
Southern Ocean ◽  
Ice Sheet ◽  
Ocean Model ◽  
Coastal Sediments ◽  
Global Ocean ◽  
Iron Cycling ◽  
Antarctic Ice Sheet ◽  
Significant Control ◽  
Subglacial Meltwater ◽  
The Impact

Abstract. Southern Ocean (SO) marine primary productivity (PP) is strongly influenced by the availability of iron in surface waters, which is thought to exert a significant control upon atmospheric CO2 concentrations on glacial/interglacial timescales. The zone bordering the Antarctic Ice Sheet exhibits high PP and seasonal plankton blooms in response to light and variations in iron availability. The sources of iron stimulating elevated SO PP are in debate. Established contributors include dust, coastal sediments/upwelling, icebergs and sea ice. Subglacial meltwater exported at the ice margin is a more recent suggestion, arising from intense iron cycling beneath the ice sheet. Icebergs and subglacial meltwater may supply a large amount of bioavailable iron to the SO, estimated in this study at 0.07–1.0 Tg yr−1. Here we apply the MIT global ocean model (Follows et al., 2007) to determine the potential impact of this level of iron export from the ice sheet upon SO PP. The export of iron from the ice sheet raises modelled SO PP by up to 40%, and provides one plausible explanation for very high seasonally observed PP in the near-coastal zone. The impact on SO PP is greatest in coastal regions, which are also areas of high observed marine PP. These results suggest that the export of Antarctic runoff and icebergs may have an important impact on SO PP and should be included in future biogeochemical modelling.

First results from coupling the Parallel Ice Sheet Model with the Modular Ocean Model via an Antarctic ice-shelf cavity module

2021 ◽  
Author(s):  
Moritz Kreuzer ◽  
Ronja Reese ◽  
Willem Huiskamp ◽  
Stefan Petri ◽  
Torsten Albrecht ◽  
...  
Keyword(s):  
Time Scales ◽  
General Circulation ◽  
Ice Sheet ◽  
Circulation Model ◽  
Ocean Model ◽  
Global Ocean ◽  
Ice Shelf ◽  
Antarctic Ice Sheet ◽  
First Results ◽  
The Antarctic

<p>The past and future evolution of the Antarctic Ice Sheet is largely controlled by interactions between the ocean and floating ice shelves. To investigate these interactions, coupled ocean and ice sheet model configurations are required. Previous modelling studies have mostly relied on high resolution configurations, limiting these studies to individual glaciers or regions over short time scales of decades to a few centuries. To study global and long term interactions, we developed a framework to couple the dynamic ice sheet model PISM with the global ocean general circulation model MOM5 via the ice-shelf cavity module PICO. Since ice-shelf cavities are not resolved by MOM5, but parameterized with the box model PICO, the framework allows the ice sheet and ocean model to be run at resolution of 16 km and 3 degrees, respectively. We present first results from our coupled setup and discuss stability, feedbacks, and interactions of the Antarctic Ice Sheet and the global ocean system on millennial time scales.</p>

A circumpolar coupled ocean – Antarctic ice sheet configuration for investigating recent changes in Southern Ocean heat content

2020 ◽  
Author(s):  
Charles Pelletier ◽  
Lars Zipf ◽  
Konstanze Haubner ◽  
Hugues Goosse ◽  
Frank Pattyn ◽  
...  
Keyword(s):  
Southern Ocean ◽  
Sea Ice ◽  
Ice Sheet ◽  
Heat Content ◽  
Ice Shelf ◽  
Sea Ice Extent ◽  
Antarctic Ice Sheet ◽  
Antarctic Sea Ice ◽  
Physical Phenomena ◽  
The Impact

<p>From 2016 on, observed tendencies of Southern Ocean sea surface temperatures and Antarctic sea ice extent (SIE) have shifted from cooling down (with SIE increase) to warming up (SIE decrease). This change of Southern Ocean surface thermal properties has been sustained since, which indicates that it is not solely due to the interannual variability of the atmosphere, but also to modifications in the ocean itself. Among other physical phenomena, the acceleration of continental ice shelf melt, through its subsequent impact on the Southern Ocean stratification, has been proposed as one of the potential meaningful drivers of the sea ice changes. Reciprocally, recent studies suggest that besides atmosphere forcings, the upper ocean thermal content bears significant impact on ice shelf melt rates and dynamics. Here we present a new circumpolar coupled Southern Ocean – Antarctic ice sheet configuration aiming at investigating the impact of this ocean – continental ice feedback, developed within the framework of the PARAMOUR project. Our setting relies on the ocean and sea ice model NEMO3.6-LIM3 sending ice shelf melt rates to the Antarctic ice sheet model f.ETISh v1.5, who in turn responds to it and provides updated ice shelf cavity geometry. Both technical aspects and first coupled results are presented.</p>

The Impact of Southern Ocean Sea Ice in a Global Ocean Model

1998 ◽  
Vol 28 (10) ◽  
pp. 1999-2018 ◽  
Author(s):  
Achim Stössel ◽  
Seong-Joong Kim ◽  
Sybren S. Drijfhout
Keyword(s):  
Southern Ocean ◽  
Sea Ice ◽  
Ocean Model ◽  
Global Ocean ◽  
The Impact

scholarly journals Ice sheet response to sub-shelf melt rates in coupled and uncoupled peri-Antarctic ice-sheet model simulations

2021 ◽  
Author(s):  
Lars Zipf ◽  
Charles Pelletier ◽  
Konstanze Haubner ◽  
Sainan Sun ◽  
Frank Pattyn
Keyword(s):  
Ocean Circulation ◽  
Ice Sheet ◽  
Ocean Model ◽  
Ice Shelf ◽  
Ice Dynamics ◽  
Antarctic Ice Sheet ◽  
Main Driver ◽  
First Results ◽  
The Impact ◽  
Ice Model

<p>Sub-shelf melting is the main driver of Antarctica's ice sheet mass loss. However, sub-shelf melt rate parameterizations for standalone ice models lack the capability to capture complex ocean circulation within ice shelf cavities. To overcome drawbacks of standalone models and to improve melt parameterizations, high resolution coupling of ice sheet and ocean models are capable of hindcasting past decennia and be compared to observations.</p><p>Here, we present first results of a hindcast (1985-2018) of the new circumpolar coupled Southern Ocean – Antarctic ice sheet configuration, developed within the framework of the PARAMOUR project. The configuration is based on the ocean and sea ice model NEMO3.6-LIM3 and the ice sheet model f.ETISh v1.7. The coupling routine facilitates exchange of monthly sub-shelf melt rates (from ocean to ice model) and evolving ice shelf cavity geometry (from ice to ocean model).</p><p>We investigate the impact of the coupling frequency (more precisely, the frequency of updating the ice shelf cavity geometry within the ocean model) on the sub-shelf melt rates and its feedback on the ice dynamics. We further compare the sub-shelf melt rates of the coupled setup to those of the standalone ice sheet model with different sub-shelf melt rate parametrizations (ISMIP6, plume, PICO, PICOP) and investigate the sensitivity of the response of the ice sheet for the different basal melt rate patterns on decadal time scales.</p>

scholarly journals Coupling framework (1.0) for the PISM (1.1.4) ice sheet model and the MOM5 (5.1.0) ocean model via the PICO ice shelf cavity model in an Antarctic domain

2021 ◽  
Vol 14 (6) ◽  
pp. 3697-3714
Author(s):  
Moritz Kreuzer ◽  
Ronja Reese ◽  
Willem Nicholas Huiskamp ◽  
Stefan Petri ◽  
Torsten Albrecht ◽  
...  
Keyword(s):  
General Circulation ◽  
Ice Sheet ◽  
Ocean Model ◽  
Global Ocean ◽  
Cavity Model ◽  
Energy Fluxes ◽  
Ice Shelf ◽  
Antarctic Ice Sheet ◽  
Wide Range ◽  
The Antarctic

Abstract. The past and future evolution of the Antarctic Ice Sheet is largely controlled by interactions between the ocean and floating ice shelves. To investigate these interactions, coupled ocean and ice sheet model configurations are required. Previous modelling studies have mostly relied on high-resolution configurations, limiting these studies to individual glaciers or regions over short timescales of decades to a few centuries. We present a framework to couple the dynamic ice sheet model PISM (Parallel Ice Sheet Model) with the global ocean general circulation model MOM5 (Modular Ocean Model) via the ice shelf cavity model PICO (Potsdam Ice-shelf Cavity mOdel). As ice shelf cavities are not resolved by MOM5 but are parameterized with the PICO box model, the framework allows the ice sheet and ocean components to be run at resolutions of 16 km and 3∘ respectively. This approach makes the coupled configuration a useful tool for the analysis of interactions between the Antarctic Ice Sheet and the global ocean over time spans of the order of centuries to millennia. In this study, we describe the technical implementation of this coupling framework: sub-shelf melting in the ice sheet component is calculated by PICO from modelled ocean temperatures and salinities at the depth of the continental shelf, and, vice versa, the resulting mass and energy fluxes from melting at the ice–ocean interface are transferred to the ocean component. Mass and energy fluxes are shown to be conserved to machine precision across the considered component domains. The implementation is computationally efficient as it introduces only minimal overhead. Furthermore, the coupled model is evaluated in a 4000 year simulation under constant present-day climate forcing and is found to be stable with respect to the ocean and ice sheet spin-up states. The framework deals with heterogeneous spatial grid geometries, varying grid resolutions, and timescales between the ice and ocean component in a generic way; thus, it can be adopted to a wide range of model set-ups.

scholarly journals Coupling framework (1.0) for the ice sheet model PISM (1.1.1) and the ocean model MOM5 (5.1.0) via the ice-shelf cavity module PICO

2020 ◽  
Author(s):  
Moritz Kreuzer ◽  
Ronja Reese ◽  
Willem Nicholas Huiskamp ◽  
Stefan Petri ◽  
Torsten Albrecht ◽  
...  
Keyword(s):  
Time Scales ◽  
General Circulation ◽  
Ice Sheet ◽  
Circulation Model ◽  
Ocean Model ◽  
Global Ocean ◽  
Energy Fluxes ◽  
Ice Shelf ◽  
Antarctic Ice Sheet ◽  
Wide Range

Abstract. The past and future evolution of the Antarctic Ice Sheet is largely controlled by interactions between the ocean and floating ice shelves. To investigate these interactions, coupled ocean and ice sheet model configurations are required. Previous modelling studies have mostly relied on high resolution configurations, limiting these studies to individual glaciers or regions over short time scales of decades to a few centuries. We present a framework to couple the dynamic ice sheet model PISM with the global ocean general circulation model MOM5 via the ice-shelf cavity module PICO. Since ice-shelf cavities are not resolved by MOM5, but parameterized with the box model PICO, the framework allows the ice sheet and ocean model to be run at resolution of 16 km and 3 degree, respectively. This approach makes the coupled configuration a useful tool for the analysis of interactions between the entire Antarctic Ice Sheet and the Earth system over time spans on the order of centuries to millennia. In this study we describe the technical implementation of this coupling framework: sub-shelf melting in the ice sheet model is calculated by PICO from modeled ocean temperatures and salinities at the depth of the continental shelf and, vice versa, the resulting mass and energy fluxes from the melting at the ice-ocean interface are transferred to the ocean model. Mass and energy fluxes are shown to be conserved to machine precision across the considered model domains. The implementation is computationally efficient as it introduces only minimal overhead. The framework deals with heterogeneous spatial grid geometries, varying grid resolutions and time scales between the ice and ocean model in a generic way, and can thus be adopted to a wide range of model setups.

On the impact of sea ice in a global ocean circulation model

1997 ◽  
Vol 25 ◽  
pp. 111-115 ◽  
Author(s):  
Achim Stössel
Keyword(s):  
Southern Ocean ◽  
Sea Ice ◽  
Ocean Circulation ◽  
General Circulation ◽  
Thermohaline Circulation ◽  
Circulation Model ◽  
Deep Ocean ◽  
Global Ocean ◽  
Convective Activity ◽  
The Impact

This paper investigates the long-term impact of sea ice on global climate using a global sea-ice–ocean general circulation model (OGCM). The sea-ice component involves state-of-the-art dynamics; the ocean component consists of a 3.5° × 3.5° × 11 layer primitive-equation model. Depending on the physical description of sea ice, significant changes are detected in the convective activity, in the hydrographic properties and in the thermohaline circulation of the ocean model. Most of these changes originate in the Southern Ocean, emphasizing the crucial role of sea ice in this marginally stably stratified region of the world's oceans. Specifically, if the effect of brine release is neglected, the deep layers of the Southern Ocean warm up considerably; this is associated with a weakening of the Southern Hemisphere overturning cell. The removal of the commonly used “salinity enhancement” leads to a similar effect. The deep-ocean salinity is almost unaffected in both experiments. Introducing explicit new-ice thickness growth in partially ice-covered gridcells leads to a substantial increase in convective activity, especially in the Southern Ocean, with a concomitant significant cooling and salinification of the deep ocean. Possible mechanisms for the resulting interactions between sea-ice processes and deep-ocean characteristics are suggested.

Developments in Simulating and Parameterizing Interactions Between the Southern Ocean and the Antarctic Ice Sheet

2017 ◽  
Vol 3 (4) ◽  
pp. 316-329 ◽  
Author(s):  
Xylar S. Asay-Davis ◽  
Nicolas C. Jourdain ◽  
Yoshihiro Nakayama
Keyword(s):  
Southern Ocean ◽  
Ice Sheet ◽  
Antarctic Ice Sheet ◽  
The Antarctic

scholarly journals Response to Filchner-Ronne Ice Shelf cavity warming in a coupled ocean–ice sheet model. Part I: The ocean perspective

2017 ◽  
Author(s):  
Ralph Timmermann ◽  
Sebastian Goeller
Keyword(s):  
World Ocean ◽  
Ice Sheet ◽  
Coupled Model ◽  
Freezing Temperature ◽  
Ocean Model ◽  
Climate Forcing ◽  
Global Ocean ◽  
Ice Shelf ◽  
Marginal Seas ◽  
Grounding Line

Abstract. A Regional Antarctic and Global Ocean (RAnGO) model has been developed to study the interaction between the world ocean and the Antarctic ice sheet. The coupled model is based on a global implementation of the Finite Element Sea-ice Ocean Model (FESOM) with a mesh refinement in the Southern Ocean, particularly in its marginal seas and in the sub-ice shelf cavities. The cryosphere is represented by a regional setup of the ice flow model RIMBAY comprising the Filchner-Ronne Ice Shelf and the grounded ice in its catchment area up to the ice divides. At the base of the RIMBAY ice shelf, melt rates from FESOM's ice-shelf component are supplied. RIMBAY returns ice thickness and the position of the grounding line. The ocean model uses a pre-computed mesh to allow for an easy adjustment of the model domain to a varying cavity geometry. RAnGO simulations with a 20th-century climate forcing yield realistic basal melt rates and a quasi-stable grounding line position close to the presently observed state. In a centennial-scale warm-water-inflow scenario, the model suggests a substantial thinning of the ice shelf and a local retreat of the grounding line. The potentially negative feedback from ice-shelf thinning through a rising in-situ freezing temperature is more than outweighed by the increasing water column thickness in the deepest parts of the cavity. Compared to a control simulation with fixed ice-shelf geometry, the coupled model thus yields a slightly stronger increase of ice-shelf basal melt rates.

Sign in / Sign up

Export Citation Format

Share Document