scholarly journals FOREST INVENTORY ATTRIBUTE ESTIMATION USING AIRBORNE LASER SCANNING, AERIAL STEREO IMAGERY, RADARGRAMMETRY AND INTERFEROMETRY–FINNISH EXPERIENCES OF THE 3D TECHNIQUES

2015 ◽  
Vol II-3/W4 ◽  
pp. 63-69 ◽  
Author(s):  
M. Holopainen ◽  
M. Vastaranta ◽  
M. Karjalainen ◽  
K. Karila ◽  
S. Kaasalainen ◽  
...  
Keyword(s):  
Forest Inventory ◽  
Laser Scanning ◽  
Mixed Forest ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Current Status ◽  
Airborne Laser ◽  
Stereo Imagery ◽  
Sar Data ◽  
Forest Conditions

Three-dimensional (3D) remote sensing has enabled detailed mapping of terrain and vegetation heights. Consequently, forest inventory attributes are estimated more and more using point clouds and normalized surface models. In practical applications, mainly airborne laser scanning (ALS) has been used in forest resource mapping. The current status is that ALS-based forest inventories are widespread, and the popularity of ALS has also raised interest toward alternative 3D techniques, including airborne and spaceborne techniques. Point clouds can be generated using photogrammetry, radargrammetry and interferometry. Airborne stereo imagery can be used in deriving photogrammetric point clouds, as very-high-resolution synthetic aperture radar (SAR) data are used in radargrammetry and interferometry. ALS is capable of mapping both the terrain and tree heights in mixed forest conditions, which is an advantage over aerial images or SAR data. However, in many jurisdictions, a detailed ALS-based digital terrain model is already available, and that enables linking photogrammetric or SAR-derived heights to heights above the ground. In other words, in forest conditions, the height of single trees, height of the canopy and/or density of the canopy can be measured and used in estimation of forest inventory attributes. In this paper, first we review experiences of the use of digital stereo imagery and spaceborne SAR in estimation of forest inventory attributes in Finland, and we compare techniques to ALS. In addition, we aim to present new implications based on our experiences.

scholarly journals The Utility of Image-Based Point Clouds for Forest Inventory: A Comparison with Airborne Laser Scanning

Forests ◽  
2013 ◽  
Vol 4 (3) ◽  
pp. 518-536 ◽  
Author(s):  
Joanne White ◽  
Michael Wulder ◽  
Mikko Vastaranta ◽  
Nicholas Coops ◽  
Doug Pitt ◽  
...  
Keyword(s):  
Forest Inventory ◽  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Airborne Laser

scholarly journals Mapping forest age using National Forest Inventory, airborne laser scanning, and Sentinel-2 data

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Johannes Schumacher ◽  
Marius Hauglin ◽  
Rasmus Astrup ◽  
Johannes Breidenbach
Keyword(s):  
Forest Inventory ◽  
Regression Models ◽  
Laser Scanning ◽  
Site Index ◽  
National Forest Inventory ◽  
Airborne Laser Scanning ◽  
National Forest ◽  
Practical Applications ◽  
Airborne Laser ◽  
Sentinel 2

Abstract Background The age of forest stands is critical information for forest management and conservation, for example for growth modelling, timing of management activities and harvesting, or decisions about protection areas. However, area-wide information about forest stand age often does not exist. In this study, we developed regression models for large-scale area-wide prediction of age in Norwegian forests. For model development we used more than 4800 plots of the Norwegian National Forest Inventory (NFI) distributed over Norway between latitudes 58° and 65° N in an 18.2 Mha study area. Predictor variables were based on airborne laser scanning (ALS), Sentinel-2, and existing public map data. We performed model validation on an independent data set consisting of 63 spruce stands with known age. Results The best modelling strategy was to fit independent linear regression models to each observed site index (SI) level and using a SI prediction map in the application of the models. The most important predictor variable was an upper percentile of the ALS heights, and root mean squared errors (RMSEs) ranged between 3 and 31 years (6% to 26%) for SI-specific models, and 21 years (25%) on average. Mean deviance (MD) ranged between − 1 and 3 years. The models improved with increasing SI and the RMSEs were largest for low SI stands older than 100 years. Using a mapped SI, which is required for practical applications, RMSE and MD on plot level ranged from 19 to 56 years (29% to 53%), and 5 to 37 years (5% to 31%), respectively. For the validation stands, the RMSE and MD were 12 (22%) and 2 years (3%), respectively. Conclusions Tree height estimated from airborne laser scanning and predicted site index were the most important variables in the models describing age. Overall, we obtained good results, especially for stands with high SI. The models could be considered for practical applications, although we see considerable potential for improvements if better SI maps were available.

scholarly journals An Adaptive Surface Interpolation Filter Using Cloth Simulation and Relief Amplitude for Airborne Laser Scanning Data

2021 ◽  
Vol 13 (15) ◽  
pp. 2938
Author(s):  
Feng Li ◽  
Haihong Zhu ◽  
Zhenwei Luo ◽  
Hang Shen ◽  
Lin Li
Keyword(s):  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Superior Performance ◽  
Cloth Simulation ◽  
Cloud Data ◽  
Interpolation Filter ◽  
Landscape Characteristics ◽  
Surface Interpolation ◽  
Airborne Laser

Separating point clouds into ground and nonground points is an essential step in the processing of airborne laser scanning (ALS) data for various applications. Interpolation-based filtering algorithms have been commonly used for filtering ALS point cloud data. However, most conventional interpolation-based algorithms have exhibited a drawback in terms of retaining abrupt terrain characteristics, resulting in poor algorithmic precision in these regions. To overcome this drawback, this paper proposes an improved adaptive surface interpolation filter with a multilevel hierarchy by using a cloth simulation and relief amplitude. This method uses three hierarchy levels of provisional digital elevation model (DEM) raster surfaces with thin plate spline (TPS) interpolation to separate ground points from unclassified points based on adaptive residual thresholds. A cloth simulation algorithm is adopted to generate sufficient effective initial ground seeds for constructing topographic surfaces with high quality. Residual thresholds are adaptively constructed by the relief amplitude of the examined area to capture complex landscape characteristics during the classification process. Fifteen samples from the International Society for Photogrammetry and Remote Sensing (ISPRS) commission are used to assess the performance of the proposed algorithm. The experimental results indicate that the proposed method can produce satisfying results in both flat areas and steep areas. In a comparison with other approaches, this method demonstrates its superior performance in terms of filtering results with the lowest omission error rate; in particular, the proposed approach retains discontinuous terrain features with steep slopes and terraces.

scholarly journals Regional Modeling of Forest Fuels and Structural Attributes Using Airborne Laser Scanning Data in Oregon

2021 ◽  
Vol 13 (2) ◽  
pp. 261
Author(s):  
Francisco Mauro ◽  
Andrew T. Hudak ◽  
Patrick A. Fekety ◽  
Bryce Frank ◽  
Hailemariam Temesgen ◽  
...  
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Field Measurements ◽  
Point Clouds ◽  
Semiparametric Models ◽  
Airborne Laser Scanning ◽  
Parametric Models ◽  
Fuel Load ◽  
Forest Fuels ◽  
Airborne Laser

Airborne laser scanning (ALS) acquisitions provide piecemeal coverage across the western US, as collections are organized by local managers of individual project areas. In this study, we analyze different factors that can contribute to developing a regional strategy to use information from completed ALS data acquisitions and develop maps of multiple forest attributes in new ALS project areas in a rapid manner. This study is located in Oregon, USA, and analyzes six forest structural attributes for differences between: (1) synthetic (i.e., not-calibrated), and calibrated predictions, (2) parametric linear and semiparametric models, and (3) models developed with predictors computed for point clouds enclosed in the areas where field measurements were taken, i.e., “point-cloud predictors”, and models developed using predictors extracted from pre-rasterized layers, i.e., “rasterized predictors”. Forest structural attributes under consideration are aboveground biomass, downed woody biomass, canopy bulk density, canopy height, canopy base height, and canopy fuel load. Results from our study indicate that semiparametric models perform better than parametric models if no calibration is performed. However, the effect of the calibration is substantial in reducing the bias of parametric models but minimal for the semiparametric models and, once calibrations are performed, differences between parametric and semiparametric models become negligible for all responses. In addition, minimal differences between models using point-cloud predictors and models using rasterized predictors were found. We conclude that the approach that applies semiparametric models and rasterized predictors, which represents the easiest workflow and leads to the most rapid results, is justified with little loss in accuracy or precision even if no calibration is performed.

scholarly journals Highway alignments extraction and 3D modeling from airborne laser scanning point clouds

2021 ◽  
Vol 102 ◽  
pp. 102429
Author(s):  
Yuzhou Zhou ◽  
Ronggang Huang ◽  
Tengping Jiang ◽  
Zhen Dong ◽  
Bisheng Yang
Keyword(s):  
3D Modeling ◽  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Airborne Laser

The shelf-life of airborne laser scanning data for enhancing forest inventory inferences

2018 ◽  
Vol 206 ◽  
pp. 254-259 ◽  
Author(s):  
Ronald E. McRoberts ◽  
Qi Chen ◽  
Dale D. Gormanson ◽  
Brian F. Walters
Keyword(s):  
Shelf Life ◽  
Forest Inventory ◽  
Laser Scanning ◽  
Airborne Laser Scanning ◽  
Airborne Laser

Large-scale prediction of aboveground biomass in heterogeneous mountain forests by means of airborne laser scanning

2016 ◽  
Vol 46 (9) ◽  
pp. 1138-1144 ◽  
Author(s):  
M. Maltamo ◽  
O.M. Bollandsås ◽  
T. Gobakken ◽  
E. Næsset
Keyword(s):  
Aboveground Biomass ◽  
Laser Scanning ◽  
Large Scale ◽  
Airborne Laser Scanning ◽  
Mountain Forests ◽  
Airborne Laser ◽  
Model Predictions ◽  
Growing Conditions ◽  
Southern Norway ◽  
Forest Conditions

This study considered airborne laser scanning (ALS) based aboveground biomass (AGB) prediction in mountain forests. The study area consisted of a long transect from southern Norway to northern parts of the country with wide ranges of elevation along a long latitudinal gradient (58°N–69°N). This transect was covered by ALS data and field data from 238 plots. AGB was modeled using different types of predictor variables, namely ALS metrics, variables related to growing conditions (elevation, latitude, and climatic variables), and tree species information. Modelling of AGB in the long transect covering diverse mountainous forest conditions was challenging: the RMSE values were rather large (37%–70%). The effects of growing conditions on model predictions were minor. However, species information was essential to improve accuracy. The analysis revealed that when doing inventories of spruce-dominated areas, all plots should be pooled together when the models are developed, whereas if pine or deciduous species dominate the area in question, separate dominant species-wise models should be constructed.

Sign in / Sign up

Export Citation Format

Share Document