scholarly journals Overview of The Implementation of Occupational Health and Safety (OHS) in Preventing The Transmission of Covid 19 in PT PKUA Bogor West Java 2021

2021 ◽  
Vol 1 (1) ◽  
pp. 491-498
Author(s):  
Wiwin Wiwin Listyowati
Keyword(s):  
Data Collection ◽  
Occupational Health ◽  
Preventive Measures ◽  
Health And Safety ◽  
Secondary Data ◽  
Occupational Health And Safety ◽  
Industrial Workers ◽  
Literature Study ◽  
West Java ◽  
Safety And Health

Since the pandemic that began in 2020, the industry in Indonesia has experienced enormous obstacles and has an impact on the industrial workers themselves, the Covid 19 infection rate in workers has reached 2 percent of the total number of infections in Indonesia and industrial areas. The purpose of this study was to see an overview of the application of occupational health and safety (OHS) in preventing the transmission of covid 19 at PT PKUA Bogor, West Java. The method used in this research is descriptive qualitative with data collection techniques through observation, literature study with secondary data, and interviews with employees of PT PKUA. The results obtained from this study are based on data from the company's OHS division and interviews with the Factory Manager, it is known that the number of workers infected with Covid 19 as of April 2021 was 8 people and those who were not infected were 119 people out of a total of 127 employees. The transmission that occurred within the company was not significant and there was no spread within the factory because the workers who were infected while on duty were out of town and did not form a factory cluster. In the company, from the HSE division report, it was found that employees were infected while on duty from out of town and came into contact with many people on their way to and from them. This research concludes that PT PKUA has done quite well to prevent the occurrence of factory clusters, the preventive measures taken have been in favor of the safety and health of industrial workers, especially in PT PKUA.

Risk Factor Identification Occupational Health and Safety Medical Record Officer Filing Section in Hospital (Literature Review)

2022 ◽  
Vol 2 (1) ◽  
pp. 13-21
Author(s):  
Eka Wilda Faida
Keyword(s):  
Occupational Health ◽  
Medical Record ◽  
Health And Safety ◽  
Implementation Process ◽  
Occupational Health And Safety ◽  
Self Awareness ◽  
Literature Study ◽  
Safety And Health ◽  
Work Units ◽  
Biomechanical Factors

Background: Filing service is one of the medical record work units that responsible for the storage and maintenance of medical record files. Filing is one of the work units in medical records that are responsible for the storage and maintenance of medical record files. The work implementation process has risks that can threaten the safety and health of officers. Therefore, it can result in low quality of work. An attempt that can be performed to decrease the risk of accident is the implementation of good Occupational Health and Safety. Through several studies related to Occupational Health and Safety in Filing Unit, some of the factors causing work accidents are physical, chemical, biological, biomechanical factors related to ergonomics, individuals, and psychosocial, which causes the officers to feel unsafe and uncomfortable at work. Therefore, this study aims to identify what are the risk factors for occupational health and safety to medical record officers in the filing section at the hospital.Methods: The research method was qualitative research. The data collection used a literature study. The subjects of the study were medical record officers in the filing section, while the object of the study was occupational health and safety.Results: The results of the study, according to 10 journals reviewed, show that factors that become the risk to occupational health and safety of medical record officers in the filling section are lighting, air temperature, smells caused by old medical record files, virus exposure, medical record storage rack, awareness of using PPE, and work relationship between officers.Conclusions: It is expected that the hospital can improve work facilities and infrastructures, and the self-awareness of medical record officers to maintain safety and comfort at work is required so that a good and optimal working atmosphere can be created.

PEMANFAATAN PERALATAN KESELAMATAN DAN KESEHATAN KERJA (K3) PADA PRAKTIKUM PROSES PRODUKSI

2020 ◽  
Vol 1 (2) ◽  
pp. 64-70
Author(s):  
Rezky Fajar Ramadhan
Keyword(s):  
Data Collection ◽  
Occupational Health ◽  
Engineering Education ◽  
Production Process ◽  
Mechanical Engineering ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Education Students ◽  
Descriptive Data

Abstrak: Tujuan penelitian ini adalah untuk mendeskripsikan penggunaan peralatan Kesehatan dan Keselamatan Kerja (K3) pada Mata Kuliah Praktikum Proses Produksi mahasiswa Pendidikan Teknik Mesin, Universitas Palangka Raya. Jenis penelitian ini adalah deskriptif. Teknik pengumpulan data menggunakan teknik angket dan dokumentasi. Objek penelitian adalah seluruh mahasiswa Pendidikan Teknik Mesin, Universitas Palangka Raya yang memprogramkan Mata Kuliah Praktikum Proses Produksi. Hasil penelitian ini menunjukkan bahwa 43% mahasiswa menyatakan sangat baik dan 57% mahasiswa menyatakan baik penggunaan peralatan K3 pada Mata Kuliah Praktikum Proses Produksi. Sehingga, disimpulkan bahwa penerapan K3 dapat mendukung pelaksanaan praktikum proses produksi.   Abstract: The purpose of this study was to describe the use of Occupational Health and Safety (OHS) equipment in the Production Process Practicum Subject of Mechanical Engineering Education students, Palangka Raya University. This type of research was descriptive. Data collection techniques used questionnaires and documentation. The object of research was all students of Mechanical Engineering Education, Palangkaraya University who programed Production Process Practicum Subjects. The results of this study indicate that 43% of students stated very well and 57% of students stated good use of OHS equipment in the Production Process Practicum Course. Thus, it was concluded that the application of OHS can support the implementation of practicum in the production process.

scholarly journals Legal Framework as a Determinant of Implementation of Occupational Health and Safety Programmes in the Manufacturing Sector in Kenya.

2014 ◽  
Vol 4 (4) ◽  
pp. 21 ◽  
Author(s):  
Priscilla Wanjiku Ndegwa ◽  
Wario Guyo ◽  
George Orwa ◽  
Robert Ng’ang’a ◽  
Elishba Muthoni Murigi
Keyword(s):  
Occupational Health ◽  
Occupational Safety ◽  
Manufacturing Sector ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Legal Framework ◽  
Occupational Safety And Health ◽  
Government Support ◽  
Hazardous Substances ◽  
Safety And Health

Recent trends in the organization of work have increased the risk of occupational safety and health (OSH) in Kenyan industries through exposure to hazardous substances, work related accidents and increased stress-related illnesses. According to International lab our organization (ILO) everyone is entitled to the right to safe and healthy working conditions and therefore the corpus of law in Kenya dealing with occupational safety and health should be embedded in the international OSH legal instruments. Specifically the occupational health and safety Act (2007) is expected to provide for safety, health and welfare of workers and all persons lawfully present at workplaces. The purpose of this study therefore was to investigate legal framework as a determinant of implementation of occupational health and safety programmes in the manufacturing sector in Kenya. It focused on six legal areas predicted as affecting implementation of OSH. These factors were national OSH policy, OSHA (occupational safety and health Act) familiarity with OSHA, government OSH inspections and audits, ease of implementation of OSHA, Government support in the implementation of OSH and OSHA implement ability. The study adopted descriptive cross-sectional survey design but however intended to gather both qualitative and quantitative data. A self administered questionnaire was used to collect data from 257 OSH officers drawn randomly from 735 manufacturing industries registered by Kenya manufacturers association. 252 questionnaires were received back and analyzed with the help of SSPS window version 21. Both correlation and regression analysis were conducted and the results showed that there was a positive significant relationship between legal framework and implementation of OSH programmes. 

Implementation of Hospital Safety and Health Management System: Resource, Organization, and Policy Aspects

2020 ◽  
Author(s):  
Dhimas Herdhianta ◽  
◽  
Hanifa Maher Denny ◽  
◽  
Keyword(s):  
Occupational Health ◽  
Human Resources ◽  
Occupational Safety ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Occupational Safety And Health ◽  
Hospital Environment ◽  
Central Java ◽  
Safety And Health ◽  
Work Burden

ABSTRACT Background: Hospital occupational health and safety is all activities to ensure and protect the safety and health of hospital human resources, patients, patient companions, visitors, and the hospital environment through efforts to prevent occupational accident and occupational disease in the hospital. It is necessary to support resources, organization, and policies in the implementation of occupational safety and health in hospitals in order to create a safe, secure and comfortable hospital condition. This study aimed to analyze the implementation of occupational safety and health at Hospital X Semarang, Central Java. Subjects and Method: This was a qualitative study conducted at Hospital X Semarang, Central Java. A total of 6 informants consisting of the main informants (members of the hospital occupational health and safety team) and triangulation informants (head of the hospital occupational health and safety team) were enrolled in this study. The data were obtained from in-depth interview method. The data were analyzed descriptively. Results: The hospital already had and provided the special budget needed in the field of hospital occupational health and safety, such as 1) Activity and provision of hospital occupational health and safety infrastructure; 2) Human Resources (HR) and assigns personnel who have clear responsibilities, authorities, and obligations in handling hospital occupational health and safety; 3) Hospital occupational health and safety official team but with double work burden; and 4) Policies were owned and compiled in written form, dated, and endorsed by the main director as well as commitment from the top leadership. Conclusion: The implementation of occupational safety and health in hospital X is quite good. Meanwhile, there is still a double work burden and have no independent hospital occupational health and safety team. Keyword: resources, organization, policy, work safety, occupational health, hospital Correspondence: Dhimas Herdhianta, Masters Program of Health Promotion, Faculty of Public Health, Universitas Diponegoro. Email: [email protected]. Mobile: 085749312412 DOI: https://doi.org/10.26911/the7thicph.04.09

scholarly journals Analysis of Knowledge, Implementation and Monitoring of K3 on Occupational Health and Safety Management System (SMK3) at Pt. Mujur Lestari Labuhan Batu Selatan

2021 ◽  
Vol 8 (12) ◽  
pp. 404-410
Author(s):  
Hotbona Novandi Tambunan ◽  
Nazaruddin . ◽  
Isfenti Sadalia
Keyword(s):  
Occupational Health ◽  
Management System ◽  
Occupational Safety ◽  
Safety Management ◽  
Health Management ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Occupational Safety And Health ◽  
Safety Management System ◽  
Safety And Health

Occupational Health and Safety (K3) is aimed as an effort to create a workplace that is safe, healthy, free from environmental pollution, so that it can reduce and or be free from work accidents and occupational diseases and can have an impact on increasing work efficiency and productivity. The need for implementation and Monitoring of the Occupational Health and Safety Management System at PT. Mujur Lestari must have a good corporate culture and be able to contribute to SMK3. For that PT. Mujur Lestari makes implementation and Monitoring to minimize the risk of work accidents for employees. The sample used in this study were employees of PT. Mujur Lestari, totaling 81 people. The data collection method used a questionnaire while the analytical method used was multivariate analysis. The results showed that there was an influence between knowledge on the Occupational Health and Safety Management System (SMK3) at PT. Mujur Lestari with a tcount greater than ttable, the effect of applying the Occupational Health and Safety Management System (SMK3) with a tcount greater than ttable, the effect of Monitoring on the Occupational Health and Safety Management System (SMK3) with a greater tcount from ttable and there is no relationship between the implementation and Monitoring of the Occupational Safety and Health Management System (SMK3). The conclusion shows that the knowledge variable has a positive and significant effect on the Occupational Safety and Health Management System (SMK3), the application variable has a positive and significant impact on the Occupational Safety and Health Management System (SMK3) and the Monitoring variable has a positive and significant effect on the Occupational Safety and Health Management System. (SMK3). Keywords: Occupational Health and Safety (K3), Occupational Health and Safety Management System (SMK3).

scholarly journals Occupational Health and Safety of Workers in Pharmaceutical Industries

2019 ◽  
Vol 8 (4) ◽  
pp. 311-316
Keyword(s):  
Occupational Health ◽  
Training Program ◽  
Occupational Safety ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Occupational Safety And Health ◽  
Continuous Training ◽  
Correlation And Regression Analysis ◽  
Safety And Health ◽  
Pharmaceutical Industries

Workers are the most significant resources for an association as they contribute the most towards the accomplishment of an association which relies upon the basic abilities of its human capital that pays to the occupational safety and health of employees in the work environment. The present study is led with the objective to highlight occupational safety and health actions for the employees and their satisfaction level accompanied occupational health and safety services provided by the chosen pharmaceutical organizations. It additionally highlighted the awareness and training program undertaken by the organizations. The analysis of the current study has been done by suitable mathematical and statistical tools consisting of percentage analysis, mean (average), standard deviation, and correlation and regression analysis depending upon the objectives of the study. The outcomes demonstrated that the representatives of both organizations are genuinely happy with the continuous training program on risk of health and safety of workers. With regard to health and safety at work, the chosen pharmaceutical companies offer their employees with numerous facilities. Likewise, the fulfillment level of the employees by means of these measures is high, which is a decent picture of a balanced relationship between the management and the employees.

scholarly journals The New Design Criteria For Steel Construction Concerning Occupational Health And Safety

2019 ◽  
Vol 2 (2) ◽  
pp. 51-55
Author(s):  
Surya Hermawan ◽  
Gunawan Budi Wijaya
Keyword(s):  
Occupational Health ◽  
Construction Project ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Design Criteria ◽  
Accident Risk ◽  
Literature Study ◽  
Steel Construction ◽  
Prevention Through Design ◽  
Work Accident

In Indonesia, the number of construction project increased, while the Occupational Health and Safety (OHS) is one of the main purposes of the construction project. However, the OHS is often neglected which is indicated by the high number of the work accident occurrences. To reduce the work risk, a safe design since the pre-construction stage which is often called prevention through design should be considered. In this research, the method was carried out by a literature study to collect theory and data from some sources, including journal, thesis and website which initiated by the National Institute of Occupational Safety and Health (NIOSH). Then, the research continued to field observation for collecting the references to help formulate the new design criteria. The outcome of this research demonstrates that the prevention step for the work accident should be done earlier in the project, which is in the design phase. By doing prevention, such as using the new design criteria with the OHS consideration or the prevention through design, could reduce the work accident risk that could occur in steel construction project. The new design criteria discussing 5 elements in steel structure including column, beam, rafter, endplate connection and angle plate connection by applying the elements of the OHS in advance.Keywords: new design criteria, steel construction, occupational health and safety

scholarly journals The Importance of Work Stress and K3 (Occupational Health and Safety) in Assessing Employee Performance

2021 ◽  
Vol 11 (1) ◽  
pp. 57-62
Author(s):  
Indah Nihayati ◽  
Moh. Saiful Bahri ◽  
Agustina Pujiastuti ◽  
Agung Yatiningrum
Keyword(s):  
Occupational Health ◽  
Work Stress ◽  
Occupational Safety ◽  
Employee Performance ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Occupational Safety And Health ◽  
Safety And Health ◽  
Spss Software ◽  
Dominant Influence

It is very important to pay attention to factors that can affect employee performance, such as work stress experienced by employees or occupational safety and health. This research was conducted at PT. Akas Mila Sejahtera Probolinggo with the objectives (1) To determine the simultaneous effect of work stress and K3 (Occupational Health and Safety) on employee performance. (2) To determine the partial effect of work stress and K3 (Occupational Health and Safety) on employee performance. (3) To determine the dominant influence between work stress and K3 (Occupational Health and Safety) on employee performance. The population of this research is the employees of PT. Akas Mila Sejahtera City of Probolinggo, amounting to 90 people. The sample taken by the Slovin method is as many as 73 people, with the criteria of employees who work as drivers, kondiktur, kernet and workshops with incidental data collection techniques. The approach used is quantitative with analysis using SPSS software. The results showed that work stress and K3 (Occupational Health and Safety) had a significant effect on employee performance.

scholarly journals Analisis Pengaruh Efektivitas Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) Terhadap Produktivitas Kerja Karyawan (Studi Kasus Plant 11 PT Indocement Tunggal Prakarsa, Tbk Citeureup)

2016 ◽  
Vol 1 (2) ◽  
pp. 80
Author(s):  
Rini Riestiany ◽  
Ratih Maria Dhewi ◽  
Sjafri Mangkuprawira
Keyword(s):  
Occupational Health ◽  
Safety Assessment ◽  
Health And Safety ◽  
Secondary Data ◽  
Occupational Health And Safety ◽  
Safety Training ◽  
Quality Of Work Life ◽  
Work Accident ◽  
Cement Factories

<p><em>Employee is an important resource to have production process in a big factory. Factory couldn’t operate without employee. To protect their employees, the leader makes a policy like occupational health and safety. This policy for protect their employee from risk of bad accident and illness that causes of work. Bad accident can strike employee anywhere and anytime so this cases must to have a special attention. So, the leader, government, and management must pay attention to this risk.  Work accident leaning influence to manpower productivity because quality of work life and guarantee of occupational health and safety influence manpower productivity. PT Indocement Tunggal Prakarsa, Tbk is one of the biggest cement factories in Indonesia. This factory has applicated occupational health and safety assessment base on Permenaker No. 05/MEN/1996 and OHSAS 18001. Occupational health and safety effectiveness can describe by six aspect based on Miner Theory. That theory are safety training,</em><em> </em><em>safety publication, control to work</em><em> </em><em>environment, inspection and discipline, improvement awareness of occupational health and safety, report and statistic of occupational health and safety. Five aspect of Theory Miner, can describe by employee perspective, even report and statistic of occupational health and safety can describe by secondary data from Safety Department and Management Representative of PT ITP.</em></p>

Sign in / Sign up

Export Citation Format

Share Document