scholarly journals Manifestation and variability of biometric characteristics in line-parental components and hybrids of maize using different genetic peninsular

2021 ◽  
Vol 29 ◽  
pp. 29-34
Author(s):  
R. A. Vozhegova ◽  
Yu.O. Lavrynenko ◽  
T.Y. Marchenko ◽  
V.V. Bazalii
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Linear Growth ◽  
Morphometric Parameters ◽  
Early Group ◽  
Biometric Parameters ◽  
Irrigation Methods ◽  
Yield Level ◽  
General Scientific ◽  
Initial Forms

Aim. To establish the manifestation and variability of the trait "plant height" in the lines-parent components and hybrids of corn using different genetic plasmas, to determine the level of heterosis in newly created test crosses and to determine the influence of morphometric parameters on grain yield under irrigation. Methods. General scientific, special, comparative-analytical, regression, information-logical analysis and mathematical modeling. Results. The manifestation and variability of traits "plant height" and "height of cob attachment" in the lines - parent components and hybrids of corn with the use of different genetic plasmas were established. The level of heterosis in newly created test crosses under irrigation conditions was determined. The dependences of biometric parameters and their correlation with grain yield in the test of hybrids obtained with the participation of newly created initial forms of different embryonic plasmas were established. Conclusions. The ratio of plant height of hybrids by maturity groups and yield level showed that for the middle-early group, in the phase of cessation of linear growth, the optimal plant height is 235–265 cm, grain yield is 12.98–13.81 t/ha; for the middle-ripe group - 255–257 cm with grain yield at the level of 15.17–15.82 t/ha. For medium-late hybrids, the optimal plant height to ensure the highest grain yield (over 15 t/ha) is in the range from 270 to 280 cm. Keywords: parental lines, genetic plasmas, hybrids, maize.

Study onGenetic Variability, Heritability and Genetic Advance for Seed Yield and Component Traits in Rice

2017 ◽  
Vol 4 (03) ◽  
Author(s):  
PUNIT KUMAR ◽  
VICHITRA KUMAR ARYA ◽  
PRADEEP KUMAR ◽  
LOKENDRA KUMAR ◽  
JOGENDRA SINGH
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Seed Yield ◽  
Flag Leaf ◽  
Grain Weight ◽  
Major Influence ◽  
Genetic Advance ◽  
Component Traits ◽  
Biological Yield ◽  
1000 Grain Weight

A study on genetic variability, heritability and genetic advance for seed yield and component traits was made in 40 genotypes of riceduring kharif 2011-2012 at SHIATS, Allahabad. The analysis of variance showed highly significant differences among the treatments for all the 13 traits under study.The genotypes namely CN 1446-5-8-17-1-MLD4 and CR 2706 recorded highest mean performance for panicles per hill and grain yield. The highest genotypic and phenotypic variances (VG and VP) were recorded for spikelets per panicle (3595.78 and 3642.41) followed by biological yield (355.72 and 360.62) and plant height (231.48 and 234.35).High heritability (broad sense) coupled with high genetic advance was observed for plant height, flag leaf length, panicles per hill, tillers per hill, days to maturity, spikelet’s per panicle, biological yield, harvest index, 1000 grain weight and grain yield, indicating that selection will be effective based on these traits because they were under the influence of additive and additive x additive type of gene action. Highest coefficient of variation (PCV and GCV) was recorded for tillers per hill (18.42% and 17.23%), panicle per hill (19.76 % and 18.68%), spikelet’s per panicle (34.30 and34.07 %), biological yield (28.31 % and 28.12 %), 1000 grain weight (15.57 % and 15 31 %) and grain yield (46.66% and 23.54 %), indicating that these traits are under the major influence of genetic control, therefore the above mentioned traits contributed maximum to higher grain yield compared to other traits, indicating grain yield improvement through the associated traits.

scholarly journals Performance of hybrid rice grown from separated tillers

2019 ◽  
Vol 17 (4) ◽  
pp. 507-513
Author(s):  
FN Kamarum Munira ◽  
Md. Parvez Anwar ◽  
Sabina Yeasmin ◽  
Md. Harun Or Rashid ◽  
Mst Farzana Rahman ◽  
...  
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Hybrid Rice ◽  
Rice Variety ◽  
Field Laboratory ◽  
Split Plot ◽  
Rice Seeds ◽  
Four Levels ◽  
Plot Design

The experiment was conducted at the Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh during July to November 2016 to investigate the performance of separated tillers of hybrid rice variety Dhani Gold. The experiment comprised three times of tiller transplantation viz. 3, 4 and 5 week aged tiller seedlings and four levels of number of tiller seedlings transplanted hill-1 viz. 2, 3, 4 and 5 tiller seedlings hill-1 laid out in a split plot design with 3 replications. The highest plant height was obtained when 3-week aged tiller seedlings were transplanted at the rate of 3 tiller seedlings hill-1. The highest number of total tillers hill-1 and number of effective tillers hill-1 were found when 3-week aged tiller seedlings were transplanted with 5 tiller seedlings hill-1. The highest grains panicle-1 was obtained when 4-week aged tiller seedlings were transplanted with 5 tiller seedlings hill-1. The highest grain yield was found when 3-week aged tiller seedlings were transplanted with 5 tiller seedlings hill-1. The lowest grain yield was found when 5-week aged tiller seedlings were transplanted with 2 tiller seedlings hill-1 in hybrid rice variety Dhani Gold. Based on the findings of the present study it may be concluded that 3-week old tiller seedlings of Dhani Gold should be transplanted at the rate of 4 or 5 tiller seedlings hill-1 for higher yield. Thus present study confirms the potentiality of growing hybrid rice from separated tillers in case of unavailability of seedlings or to minimize the seed cost of high value hybrid rice seeds. J Bangladesh Agril Univ 17(4): 507–513, 2019

scholarly journals Growth and yield performance of soybean with the application of Bradyrhyzobium inoculant via furrow and seed

2017 ◽  
Vol 38 (4Supl1) ◽  
pp. 2387
Author(s):  
Santiel Alves Vieira Neto ◽  
Fábio Ribeiro Pires ◽  
João Carlos Madalão ◽  
Douglas Gomes Viana ◽  
Carlos César Evangelista de Menezes ◽  
...  
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Agricultural Production ◽  
Aerial Part ◽  
Dry Matter ◽  
Growth And Yield ◽  
Recommended Dose ◽  
Yield Performance ◽  
Seed Inoculation ◽  
Dry Matter Weight

Given the high costs of agricultural production, especially due to the price of fertilisers, particularly nitrogen, the use of inoculants to supply nitrogen to soybean crops is a widely recommended practice. The objective of this study was to evaluate the feasibility of applying inoculants through seed and planting furrow in soil previously cultivated with soybean and Brazilian native “cerrado” biome soil under greenhouse conditions. Seven treatments were tested: 1) inoculation via seed (inoculant + fungicide + micronutrient), 2) treatment via seed (fungicide + micronutrient), 3) control (only seed), 4) inoculation via furrow-dose 1 (recommended dose), 5) inoculation via furrow-dose 2 (twice the recommended dose), 6) inoculation via furrow-dose 3 (three times the recommended dose) and 7) inoculation via furrow-dose 1 + seed inoculation. We evaluated plant height, fresh and dry matter weight of the aerial part and nodules, number of total, viable and non-viable nodules, number of pods per plant and grain yield. Inoculation was more effective when used in cerrado soil, but soybean performance in treatments without inoculation was higher in previously cultivated soil. Application through furrow proved to be a viable practice due to the similarity of the results obtained with the traditional application by seed.

Improving Soybean Production Using Light Supplementation at Field-Scale: A Case Study

2021 ◽  
Vol 9 (3) ◽  
pp. 259
Author(s):  
Ernane M Lemes ◽  
Breno N R Azevedo ◽  
Matheus F I Domiciano ◽  
Samuel L Andrade
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Crop Production ◽  
High Efficiency ◽  
Field Scale ◽  
Soybean Crop ◽  
Illumination System ◽  
Progress Curve ◽  
Commercial Area ◽  
Yield Responses

In modern agriculture, there is a growing need for increasing crop efficiency while minimizing environmental impacts. The use of high-efficiency light supplementation to enhance plant development is limited for high-productive crops at field conditions (outdoor). This study evaluated the soybean plant’s yield responses in an open commercial area (field scale) cultivated under conditions of artificial light supplementation. A commercial irrigated (pivot) area received an illumination system for light supplementation (LS) in its inner pivot spans. About 40 hours of LS were applied to the plants during the soybean crop cycle. The area’s outer pivot spans did not receive light supplementation (nLS). The internode number, the plant height, the pods per plant were evaluated weekly to compute the area under the progress curve (AUPC). The grain yield at harvest was also assessed. The AUPC of the internode number, plant height and pods per plant were positively affected by the LS treatment. The regular soybean cycle (nLS) is about 17 weeks; however, the LS harvest occurred three weeks later. Light supplementation increased soybean grain yield by 57.3% and profitability by 180% when compared to nLS. Although light supplementation at field scale poses a challenge, it is now affordable since sustainable field resistant technologies are now available. The present study is the first known report of light supplementation used to improve soybean crop production at field scale.

scholarly journals Green ear yield and grain yield of maize cultivars in competition with weeds

2010 ◽  
Vol 28 (1) ◽  
pp. 77-85 ◽  
Author(s):  
P.S.L. Silva ◽  
K.M.B. Silva ◽  
P.I.B. Silva ◽  
V.R. Oliveira ◽  
J.L.B. Ferreira
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Block Design ◽  
Corn Yield ◽  
Modern Agriculture ◽  
Maize Cultivars ◽  
Randomized Complete Block Design ◽  
Ear Height ◽  
Herbicide Use ◽  
Ground Part

The reduction in herbicide use is one of the greatest interests for modern agriculture and several alternatives are being investigated with this objective, including the adoption of cultivars that suppress weeds. The objective of this study was to verify if maize cultivars develop differently, in competition with weeds, to produce green ears and grain. Randomized complete block design was used, with split-plots and five replications. Cultivars DKB 390, DKB 466, DKB 350, AG 7000, AG 7575 and Master, were evaluated in the plots, without weeding and two weedings (at 22 and 41 days after sowing) in sub plots. Twenty-one species were identified in the experimental area, the most frequent being Gramineae (Poaceae), Euphorbiaceae, Leguminosae (Fabaceae) and Convolvulaceae species. There was no difference in the dry biomass above-ground part of the weeds in the plots of the evaluated cultivars. The cultivars behaved similarly in treatments with or without hoeing, except for plant height and ear height evaluations. Without hoeing, plant height increased in cultivar DKB 390, while plant height and ear height decreased in cultivar AG 7575. In the other cultivars, these traits did not change under weed control. The presence of weeds decreased the values of all traits employed to assess green corn yield, with the exception of the total number of green ears and grain yield.

scholarly journals Genetic control of agronomic traits in an oat population of recombinant lines

2010 ◽  
Vol 10 (4) ◽  
pp. 305-311 ◽  
Author(s):  
Itamar Cristiano Nava ◽  
Ismael Tiago de Lima Duarte ◽  
Marcelo Teixeira Pacheco ◽  
Luiz Carlos Federizzi
Keyword(s):  
Grain Yield ◽  
Genetic Control ◽  
Plant Height ◽  
Agronomic Traits ◽  
Test Weight ◽  
Phenotypic Traits ◽  
Phenotypic Data ◽  
Plant Growth Habit ◽  
Vegetative Cycle ◽  
Efficiency Of Selection

Understanding the genetic control of phenotypic traits is essential to increase the efficiency of selection for adapted, high-yielding genotypes. The purpose of this study was to determine the genetic control of nine traits of hexaploid oat. Phenotypic data were collected from a population of 162 recombinant lines derived from the cross 'UFRGS17 x UFRGS 930598-6'. For the traits plant growth habit, hairs on leaf edges and panicle type, monogenic genetic control was observed. A quantitative and/or polygenic genetic control was stated for the traits panicle weight, panicle length, vegetative cycle, plant height, test weight and grain yield. High heritability was estimated for the traits vegetative cycle (h² = 0.89) and plant height (h² = 0.79), while moderate heritability was determined for test weight (h² = 0.51) and grain yield (h² = 0.48).

scholarly journals Features of formation of bean-cereal agrophytocenoses on sod-podzolic soils of the Carpathian foothills of Ukraine

1970 ◽  
pp. 121-133
Author(s):  
V.H. Kurhak ◽  
U.M. Karbivska
Keyword(s):  
Linear Growth ◽  
Mineral Fertilizer ◽  
Shoot Density ◽  
Perennial Grasses ◽  
Podzolic Soils ◽  
General Scientific ◽  
Comparative Results ◽  
Positive Effect ◽  
Scientific Hypotheses ◽  
A Share

Purpose. To establish changes in botanical composition, density and linear growth of components of legume-cereal agrophytocenoses with the participation of various leguminous and cereal perennial grasses in comparison with cereal grasses on different backgrounds of mineral fertilizer on sod-podzolic soils of Carpathian foothills. Methods. General scientific – hypotheses, induction and deduction, analogies, generalizations and special – field, laboratory, mathematical and statistical, computational and comparative. Results. Averagely over four years, the share of the deervetch in the crop with nitrogen-free fertilizition was the largest and ranged from 53-59% with the number of shoots 844-888 pcs/m2. The share of alfalfa sown and the density of its shoots were the lowest and ranged from 32-36% and 335-373 pcs/m2. Meadow clover in legume-cereal agrophytocenoses was well maintained only in the first 2-3 years of use with a share of 60-70%. Eastern galega was kept in grasslands for four years with a share of 36-40%. Legume components had a positive effect on the linear growth of cereal components. In deervetch-cereal stands on nitrogen-free backgrounds, it was 9-12 cm larger compared to the height of the same cereals in cereal mixtures. Conclusions. It is established that for four years the best in legume-cereal agrophytocenoses is kept horned, and alfalfa sowing is the worst. Meadow clover is well kept in grasslands only in the first three years of life. Eastern galega is well kept in grasslands, but with a smaller proportion than deervetch. The share of deervetch in the crop on the nitrogen-free fertilization backgrounds is the highest and ranges from 53 to 59% with a shoot density of 844-888 pcs/m2. The proportion of the alfalfa and the density of its shoots is the smallest – 32-36% and 335-373 pcs/m2 respectively.

scholarly journals Evaluation of Underutilized Kodo Millet (Paspalum scrobiculatum L.) Accessions using Morphological and Quality Traits

2020 ◽  
Author(s):  
V. Nirubana ◽  
R. Ravikesavan ◽  
K. Ganesamurthy
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Association Studies ◽  
Antioxidant Properties ◽  
Flowering Plant ◽  
Path Coefficient ◽  
Path Coefficient Analysis ◽  
Wide Range ◽  
Kodo Millet ◽  
Inflorescence Length

Background: Kodo millet is an important drought tolerant crop and has high nutritional values, dietary fiber and antioxidant properties. It has considerable production potential in marginal and low fertility soils under diverse environmental conditions. Considering the importance of the crop, it is necessary to improve the nutritional quality along with grain yield of the crop. With this background, the investigation was aimed to study the correlation and path coefficient analysis which helps to identify the promising traits for yield and quality improvement. Methods: One hundred and three kodo millet germplasm lines were evaluated for 13 morpho-agronomic and two grain nutritional traits. The crop was raised in randomized block design to select the promising genotypes and to study the association among the traits and the magnitude of direct and indirect effects for fifteen quantitative traits. Result: Based on the overall mean performance the significant genotypes were identified and found wide range of variability for different traits. Character association studies indicated that days to first flowering, days to 50 per cent flowering, plant height, number of productive tillers, peduncle length, inflorescence length, length of the longest raceme and thumb length were significantly positive association with grain yield per plant. Path coefficient analysis revealed that inflorescence length, plant height, length of the longest raceme, flag leaf blade length and number of productive tillers exhibited high direct positive effect on grain yield. Therefore, giving importance of these traits during selections may be useful for developing nutritionally superior high yielding kodo millet genotypes.

Sign in / Sign up

Export Citation Format

Share Document