Drying of a Colloidal Suspension Deposited on a Substrate: Experimental and Numerical Studies

We studied a colloidal suspension of polystyrene beads deposited on a glass substrate. The glass substrate contained either straight rough areas on the borders of an open channel or only straight rough areas. The drying of the suspension was observed with an optical microscope, the light bulb of which acted as an energy source to evaporate the suspension. Moreover, the light bulb of the microscope provided optical pressure due to light. We observed that the colloidal particles were trapped on the rough areas of the substrate and not in the open channel at the end of the drying process. In order to understand the experimental results, we modeled numerically the drying of the suspension using a Molecular Dynamics program. The forces imposed on the substrate by the particles are their weight, the optical pressure due to the light bulb of the optical microscope, the attractive Van der Waals force and the repulsive diffuse layer force. The forces acting between two particles are the attractive Van der Waals forces, the repulsive diffuse layer force and the capillary force. The Gaussian random force (linked to Brownian motion) and the particle liquid viscous drag force (also linked to Brownian motion) are horizontal and applied on one particle. The relation between the normal forces N (forces acting by the particles on the substrate) and the horizontal forces F is Amontons' third law of friction F ≤ μk N; in rough areas of the substrate, μk is larger than in smooth areas. This explains that particles are trapped in the areas with high roughness.

Coupled WGMs in a Dielectric Microsphere: Proof-of-Concept of Optical Pressure Microsensor

We propose the physical proof-of-concept of a new simple miniature pressure sensor based on the whispering gallery modes (WGMs) optically excited in a dielectric microsphere placed near a flexible reflective membrane, which acts as an ambient pressure sensing element. WGMs excitation is carried out by free-space coupling of optical radiation to a microsphere. The distinctive feature of proposed sensor design is double excitation of optical eigenmodes by forward and backward propagating radiation reflected from a membrane that causes WGMs interference in particle volume. The optical intensity of resulting resonant field established in the microsphere carries information about the exact position of the pressure-loaded reflecting membrane. The sensitivity of the proposed sensor strongly depends on the quality factor of the excited resonant mode, as well as geometrical and mechanical parameters of the flexible membrane. We propose to register not the displacement of the position of the WGM resonance, but the change in its amplitude under the influence of the change in the distance between the sphere and the mirror under the influence of pressure. Important advantages of the proposed sensor are miniature design (linear sensor dimensions depends only on the membrane diameter) and the absence of a mechanical contact of pressure-sensitive element with WGM resonator.

Characterisation and Validation of an Optical Pressure Sensor for Combustion Monitoring at Low Frequency

This paper introduces a novel approach to monitor pressure dynamics in turbomachinery. This innovation is motivated by the need expressed by machine OEMs and end-users to detect and avoid combustion instabilities, as well as lean-blowout (LBO), in low emission combustion systems. Such situations are often characterised by a marked increase of pressure signals in low frequency range. The piezoelectric technology, conventionally used for pressure measurements, presents sensitivity and stability issues at high temperatures and low frequencies. Here a new paradigm for pressure sensing, based on optical interferometry, is characterised and validated. The interferometric sensing system is designed to provide a larger range of measurement frequencies with better performance, in the low frequency range (< 50Hz), while exposed to high temperatures. This unique feature allows the real-time observation of events, such as the specific behaviour of a low frequency flame dynamic, which is characteristic of an imminent LBO. This improved monitoring system will support an optimisation of the machine performance, leading to a safer, cleaner, more flexible and more cost-efficient operation for the end-user. The novel measurement system has been characterised under non-reactive and reactive conditions within the frame of a joint study between Meggitt SA, Combustion Bay One e.U. and FH Joanneum GmbH. The technology is first described, including the relevant hardware and software components of the measurement chain. The different experimental set-ups and conditions are also illustrated. The results of the test campaign and their subsequent analysis are then presented, supporting the expected advantages over piezoelectric technology. In conclusion, a possible strategy for the detection of LBO precursors based on low frequency data is proposed.