direct absorption
Recently Published Documents


TOTAL DOCUMENTS

440
(FIVE YEARS 133)

H-INDEX

48
(FIVE YEARS 12)

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 8186
Author(s):  
Xin Jin ◽  
Guiping Lin ◽  
Haichuan Jin ◽  
Zunru Fu ◽  
Haoyang Sun

As low-cost, widely distributed and easily accessible renewable clean energy, solar energy has attracted more and more attention. Direct absorption solar collectors can convert solar energy into heat, but their efficiency is closely related to the absorption performance of the working fluid. In order to improve the absorption efficiency of direct absorption solar collectors, an experimental study on the selective absorption of solar energy by hybrid nanofluids was carried out. Five hybrid nanofluids were prepared and characterized, and the energy transfer advantages of hybrid nanofluid over single nanofluid were carefully studied. Experiments have found that the light-to-heat conversion properties of hybrid nanofluids show no obvious advantages or disadvantages compared with single nanofluid, and their performance is closely related to the types of nanoparticles. In addition, the hybrid nanofluid generally has two peaks, exactly the same as the single nanofluid in the mixed component, but the absorption curve is flatter than that of the single nanofluid. Further research of more types of hybrid nanofluids can provide new insights into the use of solar energy.


Author(s):  
P.G. Struchalin ◽  
V.S. Yunin ◽  
K.V. Kutsenko ◽  
O.V. Nikolaev ◽  
A.A. Vologzhannikova ◽  
...  

2021 ◽  
Vol 154 ◽  
pp. 106253
Author(s):  
Yonghua Xu ◽  
Feng Zhen ◽  
Yong Sun ◽  
Changyu Liu ◽  
Dong Li

2021 ◽  
Vol 2116 (1) ◽  
pp. 012119
Author(s):  
Bernardo Buonomo ◽  
Oronzio Manca ◽  
Ruben Hernan Mariani ◽  
Sergio Nardini

Abstract A numerical analysis on a two-dimensional steady state forced convection inside a solar collector with direct absorption due to a nanofluid composed of water and nanoparticles of carbon nanohorns is carried out. The analysis allows to provide the main fluid flow and thermal characteristics of a simple flat solar collector with a distance between the glass and the collecting plate of 1.2 mm and a length of 1.0 m. The solar collector presents heat losses from the upper wall towards the ambient by an external surface heat transfer coefficient. The governing flow equations for the nanofluid are written assuming the single-phase flow and the heat transfer due to the radiation, for the local absorption of nanoparticles, is evaluated by the non-grey discrete ordinates method. The carbon nanohorns optical and thermal properties are estimated by the data available in literature. The finite volume method is used to solve the problem and the results are carried out employing the ANSYS-FLUENT code. The results are given in terms of temperature and velocity fields and transversal profiles inside the channel for different values of mass flow rates, solar irradiance, volumetric nanoparticle concentrations and assigned values of external surface heat transfer coefficient and temperature.


2021 ◽  
Author(s):  
Anna Kosinska ◽  
Boris V. Balakin ◽  
Pawel Kosinski

Abstract The paper is devoted to the topic of direct absorption solar collectors (DASCs). The main focus is on comparing two kinds of working fluids that can be used in DASCs, namely carbon black nanofluids and biodegradable coffee colloids. At first, the fluids were tested by exposing them to artificial light (indoor experiments) and real solar irradiation (field experiments). The indoor experiments used a system of relatively large geometry, so most of the heat absorption occurred close to the irradiated surface. This resulted in a similar performance by both fluids. The field experiments involved a smaller system, and the light was concentrated by a solar collector. Here the nanofluid outperformed the coffee colloids. Next, the process was analysed using a theoretical analysis that gave good correspondence with the experiments. Finally, we extended the theoretical analysis to a DASC with a flowing fluid. The model was validated against results from the literature, but it also supported our experimental findings.


2021 ◽  
Vol 13 (19) ◽  
pp. 11017
Author(s):  
Kei-Jung Kwon ◽  
Hyuk-Joon Kwon ◽  
Yun-Ah Oh ◽  
Soo-Young Kim ◽  
Bong-Ju Park

In this study, we investigated the physiological responses and particulate matter (PM) abatement and adsorption of three plants: Ardisia crenata, Ardisia japonica, and Maesa japonica, to determine their effectiveness as indoor air purification. When compared to control (without plants), PM was significantly and rapidly decreased by all three plants. The reduction in PM varied by species, with A. crenata being the most effective, followed closely by A. japonica, and finally M. japonica. M. japonica showed the highest rate of photosynthesis and transpiration, generating the greatest decrease in CO2 and a large increase in relative humidity. We hypothesize that the increased relative humidity in the chamber acted in a manner similar to a chemical flocculant, increasing the weight of PM via combination with airborne water particles and the creation of larger PM aggregates, resulting in a faster sedimentation rate. A. crenata had a stomatal size of ~20 μm or larger, suggesting that the PM reduction observed in this species was the result of direct absorption. In the continuous fine dust exposure experiments, chlorophyll fluorescence values of all three species were in the normal range. In conclusion, all three species were found to be suitable indoor landscaping plants, effective at reducing indoor PM.


Sign in / Sign up

Export Citation Format

Share Document