Progress towards the realization of an optical Far-Field Superlens

<p>Conventional optics suffer from a fundamental resolution limit due to the nature of light. The near-field superlens concept was introduced two decades ago, and its theory for enabling high resolution imaging is well-established now. Initially, this superlens, which has a simple setup, became a hot topic given the proposition of overcoming the diffraction limit. It has been demonstrated that a near-field superlens can reconstruct images using evanescent waves emanating from small objects by means of resonant excitations on the surface of the superlens. A modified version of the superlens named the far-field superlens is theorized to be able to project the near-field subwavelength information to the far-field region. By design, the far-field superlens is a near-field superlens with nanostructures added on top of it. These nanostructures, referred to as diffraction gratings help couple object information available in the evanescent waves to the far-field. Work reported in this thesis is divided to two major sections. The first describes the modelling technique that investigates the performance of a far-field superlens. This section focuses on evaluating the impact of the diffraction gratings geometry and the object size on the far-field superlens performance as well as the resulting far-field pattern. It was shown that a far-field superlens with a nanograting having a duty cycle of 40% to 50% produces the maximum intensity and contrast in the far-field interactions. For periodic rectangular objects, an inverse-trapezoidal nanograting was shown to provide the best contrast and intensity for far-field interactions. The minimal simulation domain to model a symmetric far-field superlens design was determined both in 2D and 3D. This input reduced the required modelling time and resources. Finally, a 3D far-field superlens model was proposed, and the effect of light polarization on the far-field pattern was studied. The second section of this thesis contains the experimental study that explores a new material as a potential candidate for the construction of far-field superlens. The material conventionally used for superlens design is silver, as its plasmonic properties are well-established. However, scaling down silver features to the nanoscale introduces fundamental fabrication challenges. Furthermore, silver oxidizes due to its reactions with sulphur compounds at ambient conditions, which means that operating a silver far-field superlens is only possible in a well-controlled environment. This disagrees with our proposed concept of a low-cost and robust superlens imaging device. On the other hand, highly doped semiconductors are emerging candidates for plasmonic applications due to the possibility of tuning their optical and electrical properties during the fabrication process. While the working principle of a superlens is independent of the plasmonic material of choice, every plasmonic material has a particular range of operating wavelengths. The pros and cons of each plasmonic material are usually identified once used experimentally. In this work, aluminium-doped zinc oxide was the proposed material of choice for the far-field superlens design. The second part of this thesis details the characterization results of the optical, electrical and structural properties of this proposed alternative. Our aluminium-doped zinc oxide samples were highly transparent for large parts of the spectrum. Their carrier concentration was of the order of 10+20 cm-3, and a resistivity of about 10-3 Ω.cm was achieved. The modelled dielectric permittivity for the studied samples showed a cross-over frequency in the near-infrared region, with the highest plasma frequency achieved in this study being 4710 cm-1.</p>

Progress towards the realization of an optical Far-Field Superlens

<p>Conventional optics suffer from a fundamental resolution limit due to the nature of light. The near-field superlens concept was introduced two decades ago, and its theory for enabling high resolution imaging is well-established now. Initially, this superlens, which has a simple setup, became a hot topic given the proposition of overcoming the diffraction limit. It has been demonstrated that a near-field superlens can reconstruct images using evanescent waves emanating from small objects by means of resonant excitations on the surface of the superlens. A modified version of the superlens named the far-field superlens is theorized to be able to project the near-field subwavelength information to the far-field region. By design, the far-field superlens is a near-field superlens with nanostructures added on top of it. These nanostructures, referred to as diffraction gratings help couple object information available in the evanescent waves to the far-field. Work reported in this thesis is divided to two major sections. The first describes the modelling technique that investigates the performance of a far-field superlens. This section focuses on evaluating the impact of the diffraction gratings geometry and the object size on the far-field superlens performance as well as the resulting far-field pattern. It was shown that a far-field superlens with a nanograting having a duty cycle of 40% to 50% produces the maximum intensity and contrast in the far-field interactions. For periodic rectangular objects, an inverse-trapezoidal nanograting was shown to provide the best contrast and intensity for far-field interactions. The minimal simulation domain to model a symmetric far-field superlens design was determined both in 2D and 3D. This input reduced the required modelling time and resources. Finally, a 3D far-field superlens model was proposed, and the effect of light polarization on the far-field pattern was studied. The second section of this thesis contains the experimental study that explores a new material as a potential candidate for the construction of far-field superlens. The material conventionally used for superlens design is silver, as its plasmonic properties are well-established. However, scaling down silver features to the nanoscale introduces fundamental fabrication challenges. Furthermore, silver oxidizes due to its reactions with sulphur compounds at ambient conditions, which means that operating a silver far-field superlens is only possible in a well-controlled environment. This disagrees with our proposed concept of a low-cost and robust superlens imaging device. On the other hand, highly doped semiconductors are emerging candidates for plasmonic applications due to the possibility of tuning their optical and electrical properties during the fabrication process. While the working principle of a superlens is independent of the plasmonic material of choice, every plasmonic material has a particular range of operating wavelengths. The pros and cons of each plasmonic material are usually identified once used experimentally. In this work, aluminium-doped zinc oxide was the proposed material of choice for the far-field superlens design. The second part of this thesis details the characterization results of the optical, electrical and structural properties of this proposed alternative. Our aluminium-doped zinc oxide samples were highly transparent for large parts of the spectrum. Their carrier concentration was of the order of 10+20 cm-3, and a resistivity of about 10-3 Ω.cm was achieved. The modelled dielectric permittivity for the studied samples showed a cross-over frequency in the near-infrared region, with the highest plasma frequency achieved in this study being 4710 cm-1.</p>

Low Discrepancy Sparse Phased Array Antennas

Sparse arrays have grating lobes in the far field pattern due to the large spacing of elements residing in a rectangular or triangular grid. Random element spacing removes the grating lobes but produces large variations in element density across the aperture. In fact, some areas are so dense that the elements overlap. This paper introduces a low discrepancy sequence (LDS) for generating the element locations in sparse planar arrays without grating lobes. This nonrandom alternative finds an element layout that reduces the grating lobes while keeping the elements far enough apart for practical construction. Our studies consider uniform sparse LDS arrays with 86% less elements than a fully populated array, and numerical results are presented that show these sampling techniques are capable of completely removing the grating lobes of sparse arrays. We present the mathematical formulation for implementing an LDS generated element lattice for sparse planar arrays, and present numerical results on their performance. Multiple array configurations are studied, and we show that these LDS techniques are not impacted by the type/shape of the planar array. Moreover, in comparison between the LDS techniques, we show that the Poisson disk sampling technique outperforms all other approaches and is the recommended LDS technique for sparse arrays.

Single-Shot Temporal Contrast Enhancement Measurement of a Plasma Mirror by a Chirped Pulse

We focused on a single-shot method for directly measuring the temporal contrast enhancement of a single plasma mirror by analyzing the spectrum of a chirped pulse spatiotemporally overlapped with the igniting laser used for generating a plasma mirror. Experimentally, temporal contrast enhancement of 102 by one plasma mirror was successfully measured in a hundred picosecond timescale and was consistent with the theory. This single-shot measurement method caused no degradation on the performance of the plasma mirror, which was proved by monitoring the efficiency and far-field pattern of the igniting laser after the plasma mirror. Combined with calorimeters and CCD cameras, this method is expected to realize the single-shot online diagnosis of plasma mirrors. This method is expected to be an efficient approach for measuring the temporal contrast enhancement of the plasma mirrors.

Fast Localization of Small Inhomogeneities from Far-Field Pattern Data in the Limited-Aperture Inverse Scattering Problem

In this study, we consider a sampling-type algorithm for the fast localization of small electromagnetic inhomogeneities from measured far-field pattern data in the limited-aperture inverse scattering problem. For this purpose, we designed an indicator function based on the structure of left- and right-singular vectors of a multistatic response matrix, the elements of which were measured far-field pattern data. We then rigorously investigated the mathematical structure of the indicator function in terms of purely dielectric permittivity and magnetic permeability contrast cases by establishing a relationship with an infinite series of Bessel functions of an integer order of the first kind and a range of incident and observation directions before exploring various intrinsic properties of the algorithm, including its feasibility and limitations. Simulation results with synthetic data corrupted by random noise are presented to support the theoretical results.

Multiobjective Optimization Using Modified Binary PSO for Reduction of Sidelobe Level of the Thinned Array Antenna

To design an efficient communication system, controlling the energy present in the side lobes of the far-field pattern is essential with a considered antenna array. This paper discussed one method for synthesizing a thin antenna array for optimizing three objectives simultaneously. They are several active elements, peak SLL and FNBW. All these objectives are in contrast in nature. This multi-objective technique furnishes appreciable flexibility for any specified application. A planar array antenna of 20X10 and 10X10 is synthesized using modified BPSO and in the position updating equation, a modified sigmoid function is used, including spread distance. Numerical results state that MBPSO performs well, and the array antenna of 20X10 with 54% filled aperture (108 elements) produces maximum PSLL and FNBW of -19.28dB and 280 in the remaining ∅ plane, respectively. The pattern representation in the far-field at three cutting planes with low PSLL’s of -20dB.Whereas 10X10 planar array antenna with 52% thinning percentage produces the best PSLL of -22.04 dB and -23.44 dB in ∅=00 & 900principal planes, respectively. The FNBW has observed in two planes is around 310. And also achieved a compromised solution of PSLL and FNBW of -19.28 dB and 270, respectively.

Short-Range Wireless Transmission in the 300 GHz Band Using Low-Profile Wavelength-Scaled Dielectric Cuboid Antennas

A short-range terahertz (THz) wireless transmission in the 300 GHz band is demonstrated using low-profile wavelength-scaled dielectric transmitting and receiving cuboid antennas (DCAs). These dielectric cuboid antennas are made of polytetrafluoroethylene with dimensions of approximately 1.2 mm × 1.2 mm × 1.3 mm. The near-field pattern of a DCA at 300 GHz was measured using an electro-optic sensing technique, and its far-field pattern characterization was based on the near-field to far-field transformation. The measured antenna gain was 15.06 ± 0.06 dBi. By employing DCAs as transmitting and receiving antennas, a 17.5 Gbps data transmission rate at distances of approximately 200 and 50 mm with bit error rates of 3.31 × 10–3 and 7.51 × 10–7 respectively, is demonstrated. The proposed mesoscopic scale DCA is a promising antenna type in intra-device communications and Kiosk download applications for future mobile devices operating in the 300 GHz band.

Reconstruction of the Far-Field Pattern of Volumetric AUTs from a Reduced Set of Near-Field Samples Collected along a Planar Spiral with a Uniform Step

An efficient near-to-far-field transformation (NTFFT) technique, wherein the near-field (NF) measurements are acquired along a planar spiral with a uniform step to make the control of the involved positioners easier, is developed in this article. Such a technique is tailored for quasi-spherical, i.e., volumetric, antennas under test and makes use of a reduced number of NF data. An effective two-dimensional sampling interpolation algorithm, allowing the accurate reconstruction of the input NF data for the standard NTFFT with plane-rectangular scan, is obtained by setting the spiral step equal to the sample spacing required for interpolating along a radial line according to the spatial bandlimitation properties of electromagnetic fields, and by properly developing a non-redundant representation along such a spiral. Tests results are reported to demonstrate that the proposed NTFFT technique retains the same accuracy as the standard plane-rectangular one.

Integrated circular optical phased array

Existing OPAs are typically based on 2D rectangular arrays or 1D linear arrays. Both approaches present a limited field-of-view (FOV) due to the presence of the grating lobes when the element spacing is larger than λ/2. To address the need for an increased steering range, we propose a new design strategy of an OPA system utilizing a 2D circular phased array, with a substantially increased FOV. We present a circular OPA using a demonstrated antenna element design, with an 820-element array. A steering range ΩSR calculated as a solid angle of 0.51π sr, and an angular beamwidth of 0.22°, was achieved. The array exhibits a sidelobe suppression larger than 10 dB, and a FOV of 2π sr. Although the performance is limited by the far field pattern of the individual antenna we chose, our circular OPA achieved, to the best of our knowledge, the largest steering range reported to date compared to the state-of-the-art integrated optical phased arrays reported in literature.