From Appendage to Crosslinker – Unusual Swelling Behavior in Spiropyran-Modified Hydrogels

Stimuli-responsive materials typically contain responsive molecular units that couple an external trigger to a defined macroscale response. Ongoing efforts to boost the versatility and complexity of these responses increasingly focus on multi-stimuli-responsive molecular units and crosslinkers, as these bear the potential to impart self-regulatory behaviors building on cooperative effects and feedback mechanisms. Herein, we study a stimuli-responsive platform consisting of polyacrylamide-based hydrogels with well-known multi-responsive spiropyrans covalently bound as pendant groups or ´non-innocent´ crosslinkers. Surprisingly, as compared to their appended counterparts, spiropyran crosslinkers cause up to two-fold larger hydrogel swelling in methylenebisacrylamide-crosslinked poly(acrylamide-co-acrylic acid) hydrogels, despite their increased relative crosslinking density. We seek the origin of this unexpected behavior by employing nanoindentation, swelling studies, and UV-vis spectroscopy to study changes in mechanical properties and in spiropyran isomer distribution as a function of solution pH, co-monomer chemistry, and swelling-induced polymer strain. We then estimate the osmotic counterion pressures as a function of spiropyran isomer distribution but find that such pressures alone are insufficient to explain the observed behavior. Charge complexation, cooperative effects between the hydrogel´s mechanics and chemistry, and aggregate formation may all be invoked to explain features of the observed ´non-innocence´ of spiropyran crosslinkers. Taken together, these insights will aid rational implementation of such responsive crosslinkers in materials design and extend the functionality of existing polymeric materials towards more complex and better tunable behaviors.

Differentiation of bisphenol F diglycidyl ether isomers and their derivatives by HPLC-MS and GC-MS—comment on the published data

Positional isomers of bisphenol F diglycidyl ether (BFDGE) have been analyzed by high-pressure liquid chromatography-mass spectrometry and by gas chromatography-mass spectrometry (HPLC-MS, GC-MS). Positional isomers of BFDGE derivatives (BFDGEx2H2O, BFDGExH2OxHCl) have been analyzed by HPLC-MS. On the basis of the obtained fragmentation patterns, the elution order of the isomers has been unequivocally determined, in standard solutions and in the sample of liquid obtained after rinsing an empty mackerel fish can with acetonitrile. Under HPLC condition, para,para isomers are eluted first, then ortho,para isomers’ elution follows, and ortho,ortho isomers are eluted last. Under GC condition, the reverse elution order has been obtained. For the first time, two ortho,para isomers of BFDGExH2OxHCl have been detected and their elution order has been determined. The obtained results are of key importance for determination of the isomer distribution of BFDGE and its derivatives in food samples.

Structural, dynamical, and photochemical properties of ortho-tetrafluoroazobenzene inside a flexible MOF under visible light irradiation

Understanding isomer distribution of tF-AZB inside DMOF-1 as a function of host–guest and guest–guest interaction.

Rapid hydrolysis of tertiary isoprene nitrate efficiently removes NOx from the atmosphere

The formation of a suite of isoprene-derived hydroxy nitrate (IHN) isomers during the OH-initiated oxidation of isoprene affects both the concentration and distribution of nitrogen oxide free radicals (NOx). Experiments performed in an atmospheric simulation chamber suggest that the lifetime of the most abundant isomer, 1,2-IHN, is shortened significantly by a water-mediated process (leading to nitric acid formation), while the lifetime of a similar isomer, 4,3-IHN, is not. Consistent with these chamber studies, NMR kinetic experiments constrain the 1,2-IHN hydrolysis lifetime to less than 10 s in deuterium oxide (D2O) at 298 K, whereas the 4,3-IHN isomer has been observed to hydrolyze much less efficiently. These laboratory findings are used to interpret observations of the IHN isomer distribution in ambient air. The IHN isomer ratio (1,2-IHN to 4,3-IHN) in a high NOx environment decreases rapidly in the afternoon, which is not explained using known gas-phase chemistry. When simulated with an observationally constrained model, we find that an additional loss process for the 1,2-IHN isomer with a time constant of about 6 h best explains our atmospheric measurements. Using estimates for 1,2-IHN Henry’s law constant and atmospheric liquid water volume, we show that condensed-phase hydrolysis of 1,2-IHN can account for this loss process. Simulations from a global chemistry transport model show that the hydrolysis of 1,2-IHN accounts for a substantial fraction of NOx lost (and HNO3 produced), resulting in large impacts on oxidant formation, especially over forested regions.

A new model mechanism for atmospheric oxidation of isoprene: global effects on oxidants, nitrogen oxides, organic products, and secondary organic aerosol

Atmospheric oxidation of isoprene, the most abundantly emitted non-methane hydrocarbon, affects the abundances of ozone (O3), the hydroxyl radical (OH), nitrogen oxide radicals (NOx), carbon monoxide (CO), oxygenated and nitrated organic compounds, and secondary organic aerosol (SOA). We analyze these effects in box models and in the global GEOS-Chem chemical transport model using the new reduced Caltech isoprene mechanism (RCIM) condensed from a recently developed explicit isoprene oxidation mechanism. We find many similarities with previous global models of isoprene chemistry along with a number of important differences. Proper accounting of the isomer distribution of peroxy radicals following the addition of OH and O2 to isoprene influences the subsequent distribution of products, decreasing in particular the yield of methacrolein and increasing the capacity of intramolecular hydrogen shifts to promptly regenerate OH. Hydrogen shift reactions throughout the mechanism lead to increased OH recycling, resulting in less depletion of OH under low-NO conditions than in previous mechanisms. Higher organonitrate yields and faster tertiary nitrate hydrolysis lead to more efficient NOx removal by isoprene and conversion to inorganic nitrate. Only 20 % of isoprene-derived organonitrates (excluding peroxyacyl nitrates) are chemically recycled to NOx. The global yield of formaldehyde from isoprene is 22 % per carbon and less sensitive to NO than in previous mechanisms. The global molar yield of glyoxal is 2 %, much lower than in previous mechanisms because of deposition and aerosol uptake of glyoxal precursors. Global production of isoprene SOA is about one-third from each of the following: isoprene epoxydiols (IEPOX), organonitrates, and tetrafunctional compounds. We find a SOA yield from isoprene of 13 % per carbon, much higher than commonly assumed in models and likely offset by SOA chemical loss. We use the results of our simulations to further condense RCIM into a mini Caltech isoprene mechanism (Mini-CIM) for less expensive implementation in atmospheric models, with a total size (108 species, 345 reactions) comparable to currently used mechanisms.

A new model mechanism for atmospheric oxidation of isoprene: global effects on oxidants, nitrogen oxides, organic products, and secondary organic aerosol

Atmospheric oxidation of isoprene, the most abundantly emitted non-methane hydrocarbon, affects the abundances of ozone, the hydroxyl radical (OH), nitrogen oxide radicals (NOx), carbon monoxide (CO), oxygenated and nitrated organic compounds, and secondary organic aerosol (SOA). We analyze these effects in box models and in the global GEOS-Chem chemical transport model using the new Reduced Caltech Isoprene Mechanism (RCIM) condensed from a recently developed explicit isoprene oxidation mechanism. We find many similarities with previous global models of isoprene chemistry along with a number of important differences. Proper accounting of the isomer distribution of peroxy radicals following the addition of OH and O2 to isoprene influences the subsequent distribution of products, decreasing in particular the yield of methacrolein, and increasing the capacity of intramolecular hydrogen shifts to promptly regenerate OH. Hydrogen shift reactions throughout the mechanism lead to increased OH recycling, resulting in less depletion of OH under low-NO conditions than in previous mechanisms. Higher organonitrate yields and faster tertiary nitrate hydrolysis lead to more efficient NOx removal by isoprene and conversion to inorganic nitrate. Only 20 % of isoprene-derived organonitrates (excluding peroxyacyl nitrates) are chemically recycled to NOx. The global yield of formaldehyde from isoprene is 22 % per carbon and less sensitive to NO than in previous mechanisms. The global molar yield of glyoxal is 2 %, much lower than in previous mechanisms because of deposition and aerosol uptake of glyoxal precursors. Global production of isoprene SOA is about one third each from isoprene epoxydiols (IEPOX), organonitrates, and tetrafunctional compounds. We find a SOA yield from isoprene of 13 % per carbon, much higher than commonly assumed in models, and likely offset by SOA chemical loss. We use the results of our simulations to further condense RCIM into a Mini-Caltech Isoprene Mechanism (Mini-CIM) for less expensive implementation in atmospheric models, with a total size (108 species, 345 reactions) comparable to currently used mechanisms.

Numerical Demonstration of In-Tube Liquid-Column Migration Driven by Photoisomerization

Liquid manipulation by photoisomerization attracts recent attentions as a new active droplet control method for micro-chemical analysis. Such a non-inverse manipulation can be realized by a use of solution liquid of surfactant that exhibits the \emph{cis}-\emph{trans} isomerization triggered by light irradiation with a specific wavelength such as ultraviolet light. Since the isomerization is accompanied by changes in fluid properties, a light irradiation on one of liquid-air interfaces of a liquid column in a tube would generate differences in the wettability accompanied between the both sides of the finite liquid column. Although this technique has been demonstrated experimentally by Muto et al. (\emph{Euro.~Phys.~J.~Special Topics}, {\bf 226}, 2016, 1199--1205), its dynamics and developments of each isomer distribution are not understood. In order to reveal the liquid-column migration phenomenon, we have performed numerical simulations of air-liquid two-phase flows and its scalar transport of the isomer, using the Volume-of-Fluid method in conjunction with the Continuum-Surface-Force model and Continuous-Species-Transfer method. We validated present results by comparison with experimental result in terms of the migration distance of the liquid column. We confirmed a termination of the liquid-column migration occurs when the \emph{cis} isomer distribution reaches the non-irradiated region. The migration speed was less dependent on the liquid-column length and was proportional to the tube diameter.