Directional quantum dot emission by soft-stamping on silicon Mie resonators

We present a soft-stamping method to selectively print a homogenous layer of CdSeTe/ZnS core-shell quantum dots (QDs) on top of an array of Si nanocylinders with Mie-type resonant modes. Using...

The effects of bending on plasmonic modes in nanowires and planar structures

In this work, we investigate the effects of bends on the surface plasmon resonances in nanowires (NWs) and isolated edges of planar structures using electron energy loss spectroscopy experiments and theoretical calculations. Previous work showed that the sharp bends in NWs do not affect their resonant modes. Here, we study previously overlooked effects and analyze systematically the evolution of resonant modes for several bending angles from 30° to 180°, showing that bending can have a significant effect on the plasmonic response of a nanostructure. In NWs, the modes can experience significant energy shifts that depend on the aspect ratio of the NW and can cause mode intersection and antinode bunching. We establish the relation between NW modes and edge modes and show that bending can even induce antinode splitting in edge modes. This work demonstrates that bends in plasmonic planar nanostructures can have a profound effect on their optical response and this must be accounted for in the design of optical devices.

Broadband tunable acoustic metasurface based on piezoelectric composite structure with two resonant modes

In this letter, we propose a deep-wavelength tunable acoustic metasurface composed of a fixed piezoelectric composite structure with a broad operating frequency range. The metasurface unit has two tunable resonant frequencies determined by specific external inductors and can continuously modulate the phase of transmitted wave. The influence of the inductors on the resonant frequencies are studied by simulation and experiment. Moreover, the functions of acoustic beam steering and focusing by the designed metasurface at three arbitrarily chosen frequencies are verified in simulation. This work may have good potential in design of acoustic metasurfaces with broadband operating frequencies.

Simultaneous Detection of Relative Humidity and Temperature Based on Silicon On-Chip Cascaded Photonic Crystal Nanobeam Cavities

In this paper, we propose and numerically demonstrate a novel cascaded silicon-on-insulator (SOI) photonic crystal nanobeam cavity (PCNC) dual-parameter sensor for the simultaneous detection of relative humidity (RH) and temperature. The structure consists of two independent PCNCs supporting two different resonant modes: a dielectric-mode and an air-mode, respectively. The dielectric-mode nanobeam cavities (cav1) are covered with SU-8 cladding to increase the sensitivity ratio contrast between RH sensing and temperature sensing. The air-mode nanobeam cavities (cav2) are coated with a water-absorbing polyvinyl-alcohol (PVA) layer that converts the change in RH into a change in refractive index (RI) under different ambient RH levels, thereby inducing a wavelength shift. Due to the positive thermo-optic (TO) coefficient of silicon and the negative TO coefficient of SU-8 cladding, the wavelength responses take the form of a red shift for cav2 and a blue shift for cav1 as the ambient temperature increases. By using 3D finite-difference time-domain (3D-FDTD) simulations, we prove the feasibility of simultaneous sensing by monitoring a single output transmission spectrum and applying the sensor matrix. For cav1, the RH and temperature sensitivities are 0 pm/%RH and −37.9 pm/K, while those of cav2 are −389.2 pm/%RH and 58.6 pm/K. The sensitivity ratios of temperature and RH are −1.5 and 0, respectively, which is the reason for designing two different resonant modes and also implies great potential for realizing dual-parameter sensing detection. In particular, it is also noteworthy that we demonstrate the ability of the dual-parameter sensor to resist external interference by using the dual wavelength matrix method. The maximum RH and temperature detection errors caused by the deviation of resonance wavelength 1 pm are only 0.006% RH and 0.026 K, which indicates that it achieves an excellent anti-interference ability. Furthermore, the structure is very compact, occupying only 32 μm × 4 μm (length × width). Hence, the proposed sensor shows promising prospects for compact lab-on-chip integrated sensor arrays and sensing with multiple parameters.

Super High Sensitivity Plasmonic Temperature Sensor Based on Square Ring Shape Resonator with Nanorods Defects

A super high sensitivity plasmonic temperature sensor via a metal-insulator-metal (MIM) waveguide system is presented in this paper, the waveguide structure is composed of a square ring shape resonator with nanorods defects and a nanodisk resonator. Finite difference-time domain method (FDTD) is used to study the structure’s transmission characteristics and electromagnetic field distributions. Results show that sensitivity will be increased due to the gap plasmonic in the nanorod defect, the nanodisk resonator provides more plasmonic resonant modes for sensing. The positions and intensities of plasmonic resonant modes can be tuned by the radius of nanorod defects and coupling distance. The calculated maximum refractive index and FOM are and 3500, respectively. Compared to the structure without nanorods, the sensitivity is enhanced 33% for mode 1. For temperature sensing, the proposed structure possesses a relatively high sensitivity of about . The proposed plasmonic structure provides a basis for designing high sensitivity nano-biosensing, refractive index sensing.

Metal-free super-wideband THz absorber for electromagnetic shielding

A technique is implemented for obtaining the high absorption over super-wideband (SWB) in a metal-free THz absorber. The multiple resonant modes with wide spectra are generated in a graphite-based resonator placed on a dielectric cavity merging of which provides the SWB response. The low permittivity dielectric slab sandwiched between the graphite sheet at its bottom and graphite resonator at its top acts as the Fabry–Perot cavity where absorption takes place. The high absorption rate of graphite in the THz regime can make it a suitable candidate for its utilization in implementing the broadband absorber. Thus, the molecular transition due to interaction of energy in graphite also provides the high absorption. The absorption bandwidth can further be enhanced by stacking of multiple layers in two different configurations of the proposed unit cell. The absorber maintains the polarization insensitivity due to symmetry and allows the high absorption for the electromagnetic wave incident up to the angle of more than 75 ° . The proposed absorber can be utilized in the THz electromagnetic shielding applications due to its SWB response.

Simultaneous Measurement of Refractive Index and Flow Rate Using a Co2+-Doped Microfiber

This paper has proposed and experimentally demonstrated an integrated Co2+-doped microfiber Bragg grating sensor (Co-MFBGS) that can measure the surrounding liquid refractive index (LRI) and liquid flow rate (LFR) simultaneously. The Co-MFBGS provides well-defined resonant modes of core and cladding in the reflection spectrum. By monitoring the wavelength of the cladding mode, the LRI can be measured; meanwhile, by monitoring the wavelength of the core mode caused by the heat exchange, the LFR can be measured. The LRI and LFR can be distinguished by the wavelength separation between cladding mode and core mode. The experimental results show that in aqueous glycerin solution, the maximum measurement sensitivity for LRI detection is −7.85 nm/RIU (refractive index unit), and the LFR sensitivity is −1.93 nm/(μL/s) at a flow rate of 0.21 μL/s.