Optimization Design of a Pneumatic Wheat-Shooting Device Based on Numerical Simulation and Field Test in Rice–Wheat Rotation Areas

In rice–wheat rotation areas of China, traditional wheat seeders have severe blockage, low working efficiency and poor seeding quality. In this study, a pneumatic shooting technology was designed, consisting mainly of a nozzle, shell and acceleration tube. To improve the sowing depth of the pneumatic shooting device, the response-surface methodology of structure parameters and CFD simulation technology was adopted in this work. The effects of working pressure, acceleration-tube diameter and throat distance on the steady airflow length (SAL) and steady airflow velocity (SAV) were studied by airflow field analysis, and the response-surface method was introduced to obtain the optimal parameter combination of the pneumatic shooting device for wheat. The optimal parameter combination was working pressure 686 kPa, acceleration tube diameter 8 mm and throat distance 20 mm. The simulation result showed that the optimized device of pneumatic shooting performs faster and has more stable airflow field characteristics in comparison to the initial device. The field test demonstrated that the optimized device has about 68% higher seeding depth than the initial device. The average field-seeding depth of the optimized device was 19.95 mm, which is about 68% higher than the initial device. The emergence rate for the optimized device was about 88.7% without obvious reduction. CFD and response-surface methods positively affect the optimization of pneumatic wheat-shooting devices, and the significance was also confirmed.

Simulation Analysis of Arc Interruption Characteristics in Disconnector

Wind and solar energy are examples of clean energy that are widely developed and utilized in order to achieve the goal of carbon neutrality. Higher requirements for the safety and reliability of the power grid are put forward after they are connected to it. In the case of disconnectors, as the power system’s protection equipment, their arc interruption characteristics are closely tied to the safety and reliability of the power system. In addition, a disconnector is required to be able to break the DC arc in the photovoltaic power generation system. Therefore, this paper focuses on the arc evolution characteristics in disconnectors. A magnetohydrodynamics (MHD) model of disconnectors was built. In this model, not only are the coupling of the electromagnetic field and the airflow field considered, but also the characteristics of the external circuit. Therefore, not only can arc evolution characteristics be obtained through this simulation model, but the breaking performance will also be directly obtained. The temperature, pressure and velocity distribution are obtained to analyze the evolution process. The curve of current versus time is calculated to analyze the breaking performance. The evolution characteristics of AC and DC arcs in the disconnector are analyzed by calculation and comparison. This provides theoretical guidance for the optimal design of DC disconnectors through simulation analysis.

Modeling the airflow field of vortex spinning

Vortex spinning technology adopts a high-speed swirling airflow to rotate the fibers with open-ends to form yarn with real twists. The airflow behavior within the nozzle has a great effect on the yarn-formation process. In this study, a three-dimensional calculation nozzle model and corresponding three-dimensional airflow region model were established to enable the numerical calculation; airflow behavior—pressure, velocity, and the turbulent airflow field, and the streamline of airflow—was investigated in the presence of fiber bundles within the vortex spinning nozzle. Hybrid hexahedral/tetrahedral control volumes were utilized to mesh the grids in the calculation region. To consider airflow diffusion and convection in the nozzle, the Realizable k- ε turbulence model with wall function was adopted to conduct the calculation. Dynamic and static pressure values were obtained by numerical analysis to predict the action of the inner surface of nozzle and the wall resistance on the high-speed swirling airflow. The numerical simulation of dynamic airflow behavior can generate great insight into the details of airflow behavior and its distribution characteristics, and is helpful for understanding the spinning mechanism and promoting optimization of the spinning process.

Optimization of Airflow Field for Pneumatic Drum Magnetic Separator to Improve the Separation Efficiency

Traditional dry magnetic separation has poor separation efficiency for fine-grained materials, and combining airflow and a magnetic field may be one of the most effective means to improve it. Based on the pneumatic drum magnetic separator developed by our team, an improved pneumatic magnetic separator with a segmented flow field is proposed, which pushes materials to move along the separation surface. Analysis of flow field in the separation zone and the forces on particles show that the improved pneumatic magnetic separator makes it easier to collect fine magnetic particles, while nonmagnetic particles are more easily removed by airflow. Separation test results also show that the iron grade and the recovery of concentrate improved from 37.89% and 74.75% to 51.76% and 91.79%, respectively. The separation efficiency of the pneumatic drum magnetic separator has been remarkably improved by optimizing airflow field in the separation zone.

The Airflow Field Characteristics of the Unmanned Agricultural Aerial System on Oilseed Rape (Brassica napus) Canopy for Supplementary Pollination

Pollination success is essential for hybrid oilseed rape (OSR, Brassica napus) seed production, but traditional pollination methods are not efficient. The unmanned agricultural aerial system (UAAS) has developed rapidly and has been widely used in China. When flying, the wind field generated by the rotors overcomes the UAAS gravity, and it blows and disturbs the crops below, which helps the pollen spread. In order to investigate the distribution law of the three-dimensional (direction x, y, z) airflow field, experiments involving three levels of flight speed (FS) at 4.0, 5.0, and 6.0 m/s, and three levels of flight height (FH) at 1.5, 2.0, and 2.5 m were conducted in the OSR field by using an electric four-rotor UAAS P20. The effects of FS and FH on airflow velocities (, , ) were analyzed. High-speed dynamic camera (HSDC) technology was used to capture the swings of OSR plants under airflow field disturbance. OSR pollen samples were collected during the experiments. The results showed that the airflow field in the direction x was mainly concentrated on the center of the flight path (S3), and the maximum wind velocity of direction x was 8.01 m/s (T1, S3). The direction x airflow field width was distributed almost symmetrically, but the center position shifted easily, due to crosswind. The airflow field in the direction y was distributed on both sides of the center flight path, and the velocity was generally larger, with the maximum at 7.91 m/s (T1, S2). The airflow field in the direction z was distributed irregularly, and the velocity was small. The FH had highly significant impacts on (p < 0.01), and the interaction of FS and FH had significant impacts on (0.01 < p < 0.05), while the FS had no significant impact on (p = 0.70804 > 0.05). The FS, FH, and interaction of FS and FH all had highly significant impacts on (p < 0.01). The swings of the OSR plant captured by the HSDC proved that the UAAS airflow field could effectively blow the OSR plant. The swing amplitude changes showed a positive correlation with airflow velocities () in general. Although the observed OSR plant swung forward and backward repeatedly, there was a law of first forward, and then backward, and forward again at the beginning of each swing. The pollen collected on the sampler verified that the UAAS airflow field could help with pollen spread. The research results provide technical support for UAAS application on supplementary pollination for hybrid OSR seed production.

Comparison of the airflow characteristics and yarn properties between conventional and dual-feed-opening rotor spinning units

In order to explore the differences between conventional and dual-feed-opening rotor spinning units (RSUs), this work compares the airflow characteristics of two RSU models utilizing a computational fluid dynamics simulation model with the accuracy verified by airflow behavior observation and air pressure measurement. The effect of two different opening roller speeds on the airflow field distribution of a dual-feed-opening model is also investigated. In addition, the yarn properties of six pure and blended yarns corresponding to the two RSU models are evaluated. The results reveal that the distributions of airflow velocity vector and air pressure in the two RSU models show a strong similarity under the same boundary conditions. However, the dual-feed-opening model possesses a centrosymmetric and more balanced airflow field distribution compared to the conventional model. In addition, the dual-feed-opening yarns show a superior performance in comparison to the conventional yarns. Furthermore, for the dual-feed-opening model, there are equivalent contributions of two separated opening and fiber transmission systems to the airflow field distribution and yarn formation. Compared to the configuration with the same two opening roller speeds, the dual-feed-opening model configured with two different opening roller speeds obtains an improved blended yarn performance with having few effects on the airflow characteristics. This strength of the dual-feed-opening RSU could facilitate the production of blended and fancy yarns employing the fibers with diverse properties. This study could provide some guidelines for the manufacture of rotor-spun yarns and the future design of RSUs.