Effect of Geometry on the Fixation Strength of Anterior Cruciate Ligament Reconstruction Using BASHTI Technique

The goal of this study is to investigate the effects of tendon and cannulated drill bit diameter on the strength of the bone and site hold tendon inside (BASHTI) fixation technique for an anterior cruciate ligament (ACL) reconstruction. Bovine digital tendons and Sawbones blocks were used to mimic the ACL reconstruction. Mechanical strength of the specimens was measured using a cyclic loading continued by a single cycle pullout load until failure to simulate the real postsurgical loading conditions. Finally, failure modes of specimens and ultimate failure load were recorded. The maximum possible tendon surface strain (i.e., tendon compression [TC]) for tendon diameters of 6, 7, 8, and 9 mm were 0.73, 0.8, 0.7, and 0.65, respectively. Eighty per cent of the specimens with tendon diameter of 6 mm and 20% of specimens with tendon diameter of 7 mm failed on the torn tendon. All samples with larger tendon diameters (i.e., 8 and 9 mm) failed on the fixation slippage. The maximum fixation strength according to the most suitable core bones for 6, 7, 8, and 9 mm tendons were 148 ± 47 N (core 9.5 mm), 258 ± 66 N (core 9.5 mm), 386 ± 128 N (core 8.5 mm), and 348 ± 146 N (core 8.5 mm), respectively. The mode of tendon failure was significantly influenced by the tendon diameter. Also, an increase in TC raised the fixation strength for all tendon diameters; however, tendon over compression decreased the fixation strength for the 8 mm tendon group. Finally, an empirical equation was proposed to predict BASHTI fixation strength.

Long-term outcome following management of canine humeral intracondylar fissure using a medial approach and a cannulated drill system

This study evaluated the feasibility, complications and long-term outcomes of using a cannulated drill system combined with intraoperative imaging to place a transcondylar screw for the management of canine humeral intracondylar fissure. Thirteen dogs were enrolled, with one dog undergoing staged bilateral surgery. No intraoperative complications occurred. Five minor (36%) and three major (21%) postoperative complications occurred, giving an overall complication rate of 57%. None of the screws placed penetrated the articular surface. The mean duration of surgery was 28 min (SD ±3.5) for dogs that developed a major complication versus 46 min (SD ±18.1) for those that did not (p=0.015). The duration of preoperative lameness was significantly shorter for cases which suffered a major complication (2 days; SD ±2.8) than those that did not (34 days; SD ±31.7, p=0.008). None of the variables assessed were significantly associated with minor complications. Median time from surgery to last follow-up was 5.8 years (range 3.5–8.5 years). Median Liverpool Osteoarthritis in Dogs questionnaire score at the final point of follow-up was 16 (range 7–27). A significant number of patients were found to require analgesia at long-term follow-up.

Trans-metacarpal Screw Fixation for Extra-articular Proximal Phalangeal Base Fractures

We developed a new internal fixation method for extra-articular fractures at the base of the proximal phalanx using a headless compression screw to achieve rigid fracture fixation through a relatively easy technique. With the metacarpophalangeal joint of the involved finger flexed, a smooth guide-pin is inserted into the intramedullary canal of the proximal phalanx through the metacarpal head and metacarpophalangeal joint. Insertion tunnels are made over the guide-pin using a cannulated drill. Then, a headless cannulated screw is placed into the proximal phalanx. All of five fractures treated by this procedure obtained satisfactory results.

Removing a broken guidewire in the hip joint: treatment options and recommendations for preventing an avoidable surgical catastrophe. A case report

ABSTRACT CONTEXT: Hardware breakage during hip surgery can pose challenging and difficult problems for orthopedic surgeons. Apart from technical difficulties relating to retrieval of the broken hardware, complications such as adjacent joint arthritis and damage to neurovascular structures and major viscera can occur. Complications occurring during the perioperative period must be informed to the patient and proper documentation is essential. The treatment options must be discussed with the patient and relatives and the implant company must be informed about this untoward incident. CASE REPORT: We report a case of complete removal of the implant and then removal of the broken guidewire using a combination of techniques, including a cannulated drill bit, pituitary forceps and Kerrison rongeur. CONCLUSIONS: We suggest some treatment options and recommendations for preventing an avoidable surgical catastrophe.