Evaluation of a Smectite Adsorption-Based Electrostatic System to Decontaminate F− Rich Thermal Waters

Several studies have shown the presence of fluoride levels much higher than the 1.5 mg/L threshold concentration recommended by WHO in the spring waters and wells of the Ethiopian Rift Valley. Available defluoridation techniques can be costly, present complicated technical aspects, and show limited effectiveness. Therefore, it is necessary to devise innovative, sustainable, and effective solutions. This study proposes an alternative method of intervention to the known techniques for removing fluoride from water, particularly suitable for smaller rural communities. In particular, in this work, the possibility to use electromagnetic fields as a physical method for removing the excess fluoride was investigated. The study was carried out by developing a multiphysics model used for studying and envisaging the design of a device. In this framework, the combination of this approach with the use of highly reactive smectite clay was numerically studied. The results obtained, although preliminary, indicate that the proposed system could significantly impoverish the waters of the Rift Valley from fluoride, with the consequence of obtaining a resource suitable for human consumption, in particular for rural communities. However, further theoretical investigations and experimental phases will be necessary to achieve the desired results.

Spray technology for deposition of droplets on coffee leaves and fruits1

ABSTRACT The correct deposition of spray along the canopy is important for the phytosanitary control in coffee plants; however, the structure of the plant makes this distribution difficult. This study aimed to evaluate the deposition of a tracer on leaves and fruits in coffee cultivation, with respect to the application rate and type of hydraulic nozzle, as well as the use of an electrostatic spraying system. A hydropneumatic sprayer was used, with hydraulic nozzles of empty conical jet of the series TVI (coarse droplets with air induction) or JA (fine droplets), at rates of 200 and 400 L ha-1. An electrostatic system, with SPE-2 nozzle and rate of 200 L ha-1, was also evaluated. The deposition of the tracer on leaves and fruits of the upper, middle and lower thirds of the trees, as well as the losses to the ground in the canopy projection, were quantified using spectrophotometry. The results indicated that the electrostatic application provides a greater deposition on leaves of the upper third than the hydropneumatic application, regardless of the application rate. The use of the TVI nozzle results in a greater deposition on the fruits of the middle third and a greater loss to the ground than the JA nozzle. Although an application rate of 400 L ha-1 results in a greater deposition on the fruits of the middle third than an application rate of 200 L ha-1, it also causes a greater loss to the ground.

Laser diffraction analysis of purified Descurainia Sophia seeds by a tribo-aero-electrostatic system

In order to separate the impurities in vegetable seeds, a tribo-aero-electrostatic separator was designed and manufactured. The data analysis of the pure Descurainia Sophia seed shows that the interaction of the voltage, distance and angle was significant on the weight of the D. Sophia at the level of 1%. To determine and compare the size of the separated seeds, a laser diffraction device with the possibility of analysing the size distribution of the particles was used. The results showed that the best purity (99.5%) with the highest percentage of the relative frequency of the D. Sophia seeds size was obtained for box 1 (the first box) with a seed size of 680 μm. By moving from box 1 towards box 4, the amount of the impurities due to the variation of the electrical properties of the materials increases, although the value of the impurities for the samples is acceptable.