Indium oxide (In2O3) nanoparticles induce progressive lung injury distinct from lung injuries by copper oxide (CuO) and nickel oxide (NiO) nanoparticles

2015 ◽  
Vol 90 (4) ◽  
pp. 817-828 ◽  
Author(s):  
Jiyoung Jeong ◽  
Jeongeun Kim ◽  
Seung Hyeok Seok ◽  
Wan-Seob Cho
Keyword(s):  
Lung Injury ◽  
Copper Oxide ◽  
Nickel Oxide ◽  
Indium Oxide ◽  
Nio Nanoparticles ◽  
Lung Injuries ◽  
In2o3 Nanoparticles

scholarly journals The binary oxide NiO-CuO nanocomposite based thick film sensor for the acute detection of Hydrogen Sulphide gas vapours

2020 ◽  
Vol 17 (3) ◽  
pp. 260-269
Author(s):  
Umesh Jagannath Tupe1 ◽  
M. S. Zambare ◽  
Arun Vitthal Patil ◽  
Prashant Bhimrao Koli
Keyword(s):  
Copper Oxide ◽  
Nickel Oxide ◽  
Thick Film ◽  
Hydrogen Sulphide ◽  
Thick Films ◽  
Binary Oxide ◽  
Ex Situ ◽  
Nio Nanoparticles ◽  
Gas Concentration ◽  
Binary Sensor

The present research deals with the synthesis of copper oxide and nickel oxide nanoparticles. The nano powder of both NiO-CuO was utilized to fabricate the thick films.Thick films fabricated by screen printing method on glass substrate. The ex-situ doping method was followed for mixing the concentration of nickel oxide in copper oxide lattice. Calculated stoichiometric amount of NiO was loaded during thick film synthesis of CuO.The structure morphology of prepared CuO-NiO nanocomposite thick films was confirmed from x-ray diffraction technique, whichapproves cubic and crystalline CuO-NiO binary nanocomposite. The surface characteristics of the prepared films investigated byscanning electron microscopy that shows homogeneous, porous CuO-NiO nanoparticles with varying dimensions.The prepared thick films of CuO-NiO nanoparticles were analysed for electrical parameter, that assured the prepared material has a semiconducting nature. Further, these thick films promoted for gas sensing interpretation of H2S gas at various temperature and varied gas concentration. Here exclusive reports for hydrogen sulphide gas are reported. The binary CuO-NiO was thoroughly investigated for hydrogen sulphide gas concentration from 50 ppm to 500 ppm at the different temperature. The binary oxide sensor is found to be very sensitive at room temperature and maximum sensitivity response was 75.01 % for H2S gas. Furthermore the response and recovery times are also reported for binary sensor in the present research. The sensor reproducibility cycle was performed forbinary oxide sensor at hydrogen sulphide gas (H2S).

Exploring the characteristics of the nickel oxide nanoparticles via Sol - gel method

2020 ◽  
Vol 3 (3) ◽  
Author(s):  
Jothi M ◽  
Sowmiya K
Keyword(s):  
Nickel Oxide ◽  
Ph Value ◽  
Lattice Structure ◽  
Sol Gel ◽  
Systematic Change ◽  
Average Crystalline Size ◽  
Nio Nanoparticles ◽  
Nickel Oxide Nanoparticles ◽  
X Ray ◽  
Vis Spectroscopy

Nickel Oxide (NiO) is an important transition metal oxide with cubic lattice structure. NiO is thermally stable that is suitable for tremendous applications in the field of optic, ceramic,glass, electro-chromic coatings, plastics, textiles, nanowires, nanofibers, electronics,energy technology, bio-medicine, magnetism and so on. In this present study, NiO nanoparticles were successfully synthesized by sol-gel technique. Nano-sols were prepared by dissolving Nickel-Chloride [NiCl2.6H2O] in NaOH solvent and were converted into nano structured gel on precipitation. A systematic change in preparation parameters like calcination temperature, time, pH value has been noticed in order to predict the influence on crystallite size. Then the prepared samples were characterized by the X-ray Diffraction Spectroscopic (XRD), UV-VIS Spectroscopy, Fourier Transform Infra-Red Spectroscopy (FTIR), Energy Dispersive X-ray Spectroscopy (EDX), Scanning Electron Microscopy (SEM) and Particle Size Analyzer (PSA). From XRD, the average crystalline-size has been calculated by Debye-Scherrer Equation and it was found to be 12.17 nm and the band gap energy of Nickel oxide (NiO) from UV studies reveals around 3.85 eV. Further, EDX and FTIR studies, confirm the presences of NiO nanoparticles. The SEM study exhibits the spherical like morphology of Nickel oxide (NiO). Further from PSA, the mean value of NiO nanoparticles has been determined.

scholarly journals Phytosynthetic Fabrication of Lanthanum Ion-Doped Nickel Oxide Nanoparticles Using Sesbania grandiflora Leaf Extract and Their Anti-Microbial Properties

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 124
Author(s):  
Srihasam Saiganesh ◽  
Thyagarajan Krishnan ◽  
Golla Narasimha ◽  
Hesham S. Almoallim ◽  
Sulaiman Ali Alhari ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Optical Properties ◽  
Rare Earth ◽  
Nickel Oxide ◽  
Photoelectron Spectroscopy ◽  
Metal Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
Nio Nanoparticles ◽  
X Ray ◽  
Sesbania Grandiflora

Over the past few years, the photogenic fabrication of metal oxide nanoparticles has attracted considerable attention, owing to the simple, eco-friendly, and non-toxic procedure. Herein, we fabricated NiO nanoparticles and altered their optical properties by doping with a rare earth element (lanthanum) using Sesbania grandiflora broth for antibacterial applications. The doping of lanthanum with NiO was systematically studied. The optical properties of the prepared nanomaterials were investigated through UV-Vis diffuse reflectance spectra (UV-DRS) analysis, and their structures were studied using X-ray diffraction analysis. The morphological features of the prepared nanomaterials were examined by scanning electron microscopy and transmission electron microscopy, their elemental structure was analyzed by energy-dispersive X-ray spectral analysis, and their oxidation states were analyzed by X-ray photoelectron spectroscopy. Furthermore, the antibacterial action of NiO and La-doped NiO nanoparticles was studied by the zone of inhibition method for Gram-negative and Gram-positive bacterial strains such as Escherichia coli and Bacillus sublitis. It was evident from the obtained results that the optimized compound NiOLa-04 performed better than the other prepared compounds. To the best of our knowledge, this is the first report on the phytosynthetic fabrication of rare-earth ion Lanthanum (La3+)-doped Nickel Oxide (NiO) nanoparticles and their anti-microbial studies.

scholarly journals Tractotomy using the Penrose drain guide for deep lung injury caused by chest drainage: a case report

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Hironori Oyamatsu ◽  
Hideki Tsubouchi ◽  
Kunio Narita
Keyword(s):  
Lung Injury ◽  
Chest Tube ◽  
Drain Tube ◽  
Chest Drainage ◽  
Respiratory Condition ◽  
Penrose Drain ◽  
Multiple Rib Fractures ◽  
Lung Injuries ◽  
The Right ◽  
Damaged Vessel

Abstract Background Pulmonary tractotomy effectively treats deep pulmonary penetrating injuries; however, it requires the accurate insertion of forceps or a stapler into the wound tract. This report describes a case of tractotomy using the Penrose drain guide for a deep lung injury caused by chest drainage. Case presentation A 75-year-old man suffered multiple rib fractures and hemothorax. After admission, chest tube drainage was performed because the patient’s respiratory condition deteriorated due to increased right pleural effusion. However, as the chest tube was stabbing into the right upper lobe, a pulmonary tractotomy was performed to treat the injury. Cutting the visceral pleura just over the tip of the chest tube caused the tube to completely penetrate the lung. A Penrose drain tube was fixed to the chest tube, which was then removed. The Penrose drain tube completely penetrated the lung and was coupled to the anvil side of the stapler to guide it smoothly into the wound tract. After stapling left the wound tract open, selective suture ligation of the damaged vessel and bronchioles was performed. Conclusions Although the indications for tractotomy using the Penrose drain guide are limited, we believe that this technique can be useful in patients with deep stabbing or penetrating lung injuries with rod- or tube-shaped foreign body remnants.

scholarly journals Simulated aeromedical evacuation exacerbates burn induced lung injury: targeting mitochondrial DNA for reversal

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Meng-Jing Xiao ◽  
Xiao-Fang Zou ◽  
Bin Li ◽  
Bao-Long Li ◽  
Shi-Jian Wu ◽  
...  
Keyword(s):  
Lung Injury ◽  
Nlrp3 Inflammasome ◽  
Hypobaric Hypoxia ◽  
Dnase I ◽  
Treatment Intervention ◽  
Aeromedical Evacuation ◽  
Hypoxia Exposure ◽  
Histopathological Evaluation ◽  
Lung Injuries ◽  
Mda Content

Abstract Background Aeromedical evacuation of patients with burn trauma is an important transport method in times of peace and war, during which patients are exposed to prolonged periods of hypobaric hypoxia; however, the effects of such exposure on burn injuries, particularly on burn-induced lung injuries, are largely unexplored. This study aimed to determine the effects of hypobaric hypoxia on burn-induced lung injuries and to investigate the underlying mechanism using a rat burn model. Methods A total of 40 male Wistar rats were randomly divided into four groups (10 in each group): sham burn (SB) group, burn in normoxia condition (BN) group, burn in hypoxia condition (BH) group, and burn in hypoxia condition with treatment intervention (BHD) group. Rats with 30% total body surface area burns were exposed to hypobaric hypoxia (2000 m altitude simulation) or normoxia conditions for 4 h. Deoxyribonuclease I (DNase I) was administered systemically as a treatment intervention. Systemic inflammatory mediator and mitochondrial deoxyribonucleic acid (mtDNA) levels were determined. A histopathological evaluation was performed and the acute lung injury (ALI) score was determined. Malonaldehyde (MDA) content, myeloperoxidase (MPO) activity, and the nucleotide-binding oligomerization domain-like receptor family pyrin domain-containing 3 (NLRP3) inflammasome level were determined in lung tissues. Data among groups were compared using analysis of variance followed by Tukey’s test post hoc analysis. Results Burns resulted in a remarkably higher level of systemic inflammatory cytokines and mtDNA release, which was further heightened by hypobaric hypoxia exposure (P < 0.01). Moreover, hypobaric hypoxia exposure gave rise to increased NLRP3 inflammasome expression, MDA content, and MPO activity in the lung (P < 0.05 or P < 0.01). Burn-induced lung injuries were exacerbated, as shown by the histopathological evaluation and ALI score (P < 0.01). Administration of DNase I markedly reduced mtDNA release and systemic inflammatory cytokine production. Furthermore, the NLRP3 inflammasome level in lung tissues was decreased and burn-induced lung injury was ameliorated (P < 0.01). Conclusions Our results suggested that simulated aeromedical evacuation further increased burn-induced mtDNA release and exacerbated burn-induced inflammation and lung injury. DNase I reduced the release of mtDNA, limited mtDNA-induced systemic inflammation, and ameliorated burn-induced ALI. The intervening mtDNA level is thus a potential target to protect from burn-induced lung injury during aeromedical conditions and provides safer air evacuations for severely burned patients.

scholarly journals MICROWAVE ASSISTED SYNTHESIS AND STRUCTURAL CHARACTERIZATION OF NICKEL OXIDE NANOPARTICLES

2016 ◽  
Vol 3 (1) ◽  
pp. 12-14
Author(s):  
Kalpanadevi K ◽  
Manimekalai R
Keyword(s):  
Electron Microscope ◽  
Nickel Oxide ◽  
Structural Characterization ◽  
Nano Particles ◽  
Microwave Assisted Synthesis ◽  
Nio Nanoparticles ◽  
Nickel Oxide Nanoparticles ◽  
Transmission Electron ◽  
Good Crystallinity

Nickel oxide (NiO) nano-particles were produced via a simple microwave method from the Ni(OH)2 precursor, which was obtained by slow drop-wise addition of 0.1M sodium hydroxide to 0.1M nickel nitrate. The mixture was vigorously stirred until the pH reached 7.2. The mixture was then irradiated with microwave to deposit Ni(OH)2 at a better precipitation rate. Drying the precipitate at 320°C resulted in formation of NiO nanoparticles. High Resolution Transmission Electron Microscope (HRTEM), Scanning Electron Microscope (SEM) and X-ray diffraction (XRD), employed for the structural characterization of the as-prepared NiO nanoparticles, revealed their good crystallinity and high-purity. Microwave irradiation increased homogeneity and decreased the mean particle size of the produced NiO particles.

Structural and Optical Properties of Pure NiO Nanoparticles and NiO-Mn2O3, NiO-CdO, NiO-Pb2O3, NiO-ZnO Nanocomposites

2021 ◽  
Vol 14 (5) ◽  
pp. 409-417
Keyword(s):  
Nickel Oxide ◽  
Green Emission ◽  
Hexagonal Structure ◽  
Precipitation Method ◽  
Nio Nanoparticles ◽  
Structural And Optical Properties ◽  
Suitable Material ◽  
Structure Morphology ◽  
Average Grain Size ◽  
Co Precipitation

Abstract: Pure nickel oxide (NiO) nanoparticles and NiO-Mn2O3, NiO-CdO, NiO-Pb2O3, NiO –ZnO nanocomposites were synthesized by co-precipitation method. The PXRD studies revealed that NiO, Mn2O3 and CdO possessed cubic structure, Pb2O3 possessed monoclinic structure, ZnO possessed hexagonal structure and confirmed the presence of polycrystallinity nature of NiO and Mn2O3, CdO, Pb2O3, ZnO in the nanocomposites. The average grain size of NiO nanoparticles was found to be 30.10 nm using Debye Scherer’s formula. The FESEM images of NiO nanoparticles and their nanocomposites revealed spherical shaped structure and NiO-Pb2O3 revealed needle shaped rod-like structure. EDAX analysis confirmed the composition of NiO nanoparticles and their nanocomposites. Raman spectra exhibited characteristic peaks of pure NiO and that of NiO- Mn2O3, NiO-CdO, NiO- Pb2O3, NiO-ZnO in the synthesized nanocomposites. In the PL spectra, blue and green emission was observed in the samples. UV-vis spectra revealed the absorption peaks of NiO nanoparticles and their nanocomposites. Thus, the synthesized NiO- Mn2O3, NiO-CdO, NiO - Pb2O3 and NiO-ZnO nanocomposites can be a suitable material for electrocatalysis applications. Keywords: Nickel oxide nanocomposites, Structure, Morphology, Absorption, Luminescence.

scholarly journals Vaping-induced lung injury: brief report for the practicing clinician

2020 ◽  
Vol 2020 (8) ◽  
Author(s):  
Bashar Khiatah ◽  
Alex Murdoch ◽  
Charles Hubeny ◽  
Carl Constantine ◽  
Amanda Frugoli
Keyword(s):  
Acute Lung Injury ◽  
Lung Injury ◽  
Case Vignette ◽  
Cigarette Use ◽  
Lung Injuries ◽  
Teenagers And Young Adults ◽  
The Usa ◽  
Physician Awareness ◽  
Harmful Effects

ABSTRACT The USA is witnessing an outbreak of vaping-induced lung injuries associated with the drastic rise in e-cigarette use, especially among teenagers and young adults. Our understanding of the harmful effects of these products is expanding as an increasing amount of consumers seek medical care for lung-related illnesses. The knowledge of the long-term sequelae of e-cigarette use is limited due to their novelty, but a growing association exists between use and acute lung injury. We describe a case vignette of vaping-induced lung injury to increase physician awareness and discuss the applicability of preliminary diagnostic criteria.

Sign in / Sign up

Export Citation Format

Share Document