Fuel filter system test facility is extended and offers full performance tests before delivery

In 1990s the first generation of PWR fuel assembly FA300 was developed in China. With constantly design improvements over the following 20 years, three types of FA300 fuel assemblies have been developed with max fuel assembly average burnup reach 40000 MWd/tU and successfully used in 300MWe PWRs. By now over 1100 fuel assemblies of FA300 series have been successfully operated in three different 300MWe PWRs with satisfied operation reliability. The CAP1400 fuel assembly development program was launched in 2010 which includes new zirconium cladding material development, UO2 pellet development, high performance fuel assembly mechanical structure development, fuel rod performance code and fuel assembly seismic analysis code development, out-of-pile fuel assembly test facility construction and in core irradiation program. The main purpose of CAP1400 fuel assembly development program is to meet the needs of self-sufficient fuel supply to CAP1400 reactor. Based on FA300 and CAP1400 fuel assembly development, a full series of PWR Fuel R&D technology and test system has been successfully established by SNERDI which will continuously support the fuel assembly improving and new type of fuel development. This paper will mainly describe the PWR fuel technology including cladding technology, pellet technology, fuel assembly mechanical design technology, fuel assembly test facility and test technology, fuel rod and fuel assembly code development progress. Furthermore, the development progress of CAP1400 fuel assembly will also be introduced. By now two types of new zirconium alloys have been selected as candidate alloys, all of the out-of pile performance tests have been finished. Both two alloys show good corrosion resistance. Through full series of fuel assembly components performance tests, the fuel assembly has finished design finalization. Most of the fuel assembly mechanical and hydraulic tests will be finished by the end of 2016. The test reactor irradiation program and commercial PWR irradiation program are also on the schedule. After the LTA program and commercial application licensing, the CAP1400 fuel assembly is anticipated to provide adequate burnup capability and operation reliability to CAP1400 reactor in China.

Download Full-text

Non-Linear Finite Element Analysis of a Fuel Filter System

10.4271/2002-01-3121 ◽

2002 ◽

Author(s):

Murali M. R. Krishna ◽

Brian Lee

Keyword(s):

Finite Element Analysis ◽

Finite Element ◽

Element Analysis ◽

Filter System ◽

Linear Finite Element ◽

Non Linear ◽

Fuel Filter

Download Full-text

Fully Loaded Factory Performance Test of the CW251B10 Gas Turbine Engine

Volume 4: Heat Transfer; Electric Power ◽

10.1115/86-gt-71 ◽

1986 ◽

Cited By ~ 1

Author(s):

Ihor S. Diakunchak ◽

David R. Nevin

Keyword(s):

Gas Turbine ◽

Performance Test ◽

Engine Performance ◽

Test Facility ◽

Performance Tests ◽

Test Results ◽

Turbine Engine ◽

Factory Test ◽

Engine Component ◽

Industrial Gas Turbine

A fully loaded factory test of the CW251B10 41MW class industrial gas turbine was carried out at the Westinghouse Canada test facility. This gas turbine, which is the latest of the W251 engine series, represents an advancement in industrial gas turbine technology. One of the main objectives of the factory test was the verification of the engine performance. The test results demonstrated that the CW251B10 engine achieved its performance goals. This paper describes some of the results of the performance tests and includes engine component performance details.

Download Full-text

Radiation Damage Studies with the HVEM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100096655 ◽

1972 ◽

Vol 30 ◽

pp. 680-681

Author(s):

J. J. Laidler ◽

B. Mastel

Keyword(s):

Radiation Damage ◽

Stainless Steels ◽

Volume Expansion ◽

Austenitic Stainless Steels ◽

Test Facility ◽

Fast Breeder Reactors ◽

Breeder Reactors ◽

Under Construction ◽

Development Laboratory ◽

Insight Into

One of the major materials problems encountered in the development of fast breeder reactors for commercial power generation is the phenomenon of swelling in core structural components and fuel cladding. This volume expansion, which is due to the retention of lattice vacancies by agglomeration into large polyhedral clusters (voids), may amount to ten percent or greater at goal fluences in some austenitic stainless steels. From a design standpoint, this is an undesirable situation, and it is necessary to obtain experimental confirmation that such excessive volume expansion will not occur in materials selected for core applications in the Fast Flux Test Facility, the prototypic LMFBR now under construction at the Hanford Engineering Development Laboratory (HEDL). The HEDL JEM-1000 1 MeV electron microscope is being used to provide an insight into trends of radiation damage accumulation in stainless steels, since it is possible to produce atom displacements at an accelerated rate with 1 MeV electrons, while the specimen is under continuous observation.

Download Full-text

Electron Channelling Contrast Imaging of Dislocations

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100181762 ◽

1990 ◽

Vol 48 (1) ◽

pp. 600-601

Author(s):

J.T. Czernuszka ◽

N.J. Long ◽

P.B. Hirsch

Keyword(s):

Field Emission ◽

Secondary Electron ◽

Surface Defects ◽

Spot Size ◽

Beam Divergence ◽

Contrast Imaging ◽

Scattered Electron ◽

Near Surface ◽

Filter System ◽

Electron Channelling

In the 1970s there was considerable interest in the development of the electron channelling contrast imaging (ECCI) technique for imaging near surface defects in bulk (electron opaque) specimens. The predictions of the theories were realised experimentally by Morin et al., who used a field emission gun (FEG) operating at 40-50kV and an energy filter such that only electrons which had lost no more than a few 100V were detected. This paper presents the results of a set of preliminary experiments which show that an energy filter system is unneccessary to image and characterise the Burgers vectors of dislocations in bulk specimens. The examples in the paper indicatethe general versatility of the technique.A VG HB501 STEM with a FEG was operated at 100kV. A single tilt cartridge was used in the reflection position of the microscope. A retractable back-scattered electron detector was fitted into the secondary electron port and positioned to within a few millimetres of the specimen. The image was acquired using a Synoptics Synergy framestore and digital scan generator and subsequently processed using Semper 6. The beam divergence with the specimen in this position was 2.5 mrads with a spot size of approximately 4nm. Electron channelling patterns were used to orientate the sample.

Download Full-text

Development of the corticospinal system and hand motor function: central conduction times and motor performance tests

Developmental Medicine & Child Neurology ◽

10.1017/s0012162200000384 ◽

2000 ◽

Vol 42 (4) ◽

pp. 220-227 ◽

Cited By ~ 58

Author(s):

U M Fietzek ◽

F Heinen ◽

S Berweck ◽

S Maute ◽

A Hufschmidt ◽

...

Keyword(s):

Motor Function ◽

Motor Performance ◽

Performance Tests ◽

Corticospinal System

Download Full-text

Differential Performance of Professional Dancers to the Music Apperception Test and the Thematic Apperception Test

Rorschachiana Journal of the International Society for the Rorschach ◽

10.1027/1192-5604/a000098 ◽

2018 ◽

Vol 39 (1) ◽

pp. 20-49

Author(s):

Leland van den Daele ◽

Ashley Yates ◽

Sharon Rae Jenkins

Keyword(s):

Visual Processing ◽

Assessment Tool ◽

Thematic Apperception Test ◽

Performance Tests ◽

Basic Emotions ◽

Gender And Age ◽

Thematic Apperception ◽

Professional Dancers ◽

Visually Based ◽

Modality Preference

Abstract. This project compared the relative performance of professional dancers and nondancers on the Music Apperception Test (MAT; van den Daele, 2014 ), then compared dancers’ performance on the MAT with that on the Thematic Apperception Test (TAT; Murray, 1943 ). The MAT asks respondents to “tell a story to the music” in compositions written to represent basic emotions. Dancers had significantly shorter response latency and were more fluent in storytelling than a comparison group matched for gender and age. Criterion-based evaluation of dancers’ narratives found narrative emotion consistent with music written to portray the emotion, with the majority integrating movement, sensation, and imagery. Approximately half the dancers were significantly more fluent on the MAT than the TAT, while the other half were significantly more fluent on the TAT than the MAT. Dancers who were more fluent on the MAT had a higher proportion of narratives that integrated movement and imagery compared with those more fluent on the TAT. The results were interpreted as consistent with differences observed in neurological studies of auditory and visual processing, educational studies of modality preference, and the cognitive style literature. The MAT provides an assessment tool to complement visually based performance tests in personality appraisal.

Download Full-text