Towards a renewable-energy-driven district heating system: key technology, system design and integrated planning

Author(s):  
Yi Dou ◽  
Lu Sun ◽  
Minoru Fujii ◽  
Yasunori Kikuchi ◽  
Yuichiro Kanematsu ◽  
...  
Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3218
Author(s):  
Pedro Durán ◽  
Herena Torio ◽  
Patrik Schönfeldt ◽  
Peter Klement ◽  
Benedikt Hanke ◽  
...  

There are 1454 district heating systems in Germany. Most of them are fossil based and with high temperature levels, which is neither efficient nor sustainable and needs to be changed for reaching the 2050 climate goals. In this paper, we present a case study for transforming a high to low temperature district heating system which is more suitable for renewable energy supply. With the Carnot Toolbox, a dynamic model of a potential district heating system is simulated and then transformed to a low temperature supply. A sensitivity analysis is carried out to see the system performance in case space constrains restrict the transformation. Finally, an economic comparison is performed. Results show that it is technically possible to perform the transformation until a very low temperature system. The use of decentralized renewable sources, decentralized heat storage tanks and the placement of a heat pump on each building are the key points to achieve the transformation. Regarding the sensitivity analysis, the transformation is worth doing until the seasonal storage and solar collector field sizes are reduced to 60% and 80% of their values in the reference case, respectively. The economic analysis shows, however, that it is hard for highly efficient low temperature renewable based heat networks to compete with district heating systems based on a centralized fossile CHP solution. Thus, though the presented transformation is technically possible, there is a strong need to change existing economic schemes and policies for fostering a stronger promotion of renewable energy policies in the heat sector.


Author(s):  
Jaspreet S. Nijjar ◽  
Alan S. Fung ◽  
Larry Hughes ◽  
Hessam Taherian

There are several benefits to district heating systems. The system design requires knowledge of community peak heating load and annual heating energy requirements. For this purpose, a residential energy model was developed using several energy usage databases. Hourly, peak, and annual heating demands were estimated by simulating 15 archetype houses using an hour-by-hour building simulation program, ENERPASS. Estimated heating profiles from model houses were used to design a district heating system for a hypothetical rural community in Nova Scotia. The findings show that building simulation is a very flexible and valuable tool in identifying the required peak and hourly energy demand of a community for the design of district energy system, and biomass district heating system can reduce community greenhouse gas emissions.


2006 ◽  
Vol 38 (9) ◽  
pp. 1111-1119 ◽  
Author(s):  
Nurdan Yıldırım ◽  
Macit Toksoy ◽  
Gülden Gökçen

2020 ◽  
Vol 4 (1) ◽  
pp. 28-34
Author(s):  

Many traditional heating systems based on fossils face challenges such as lack of investment or unfavorable price regulation, low technical performance, impact on the environment and negative consumer perceptions. The CoolHeating project funded by the EU’s Horizon 2020 program, whose basic features and outcomes are presented in this work, promotes the implementation of small modular renewable heating and cooling grids for communities in South-Eastern Europe, including the town of Visoko as one of five target regions. Core activities, besides techno-economical assessments and social-environmental benefits, include measures to stimulate the interest of communities and citizens to set-up renewable district heating systems. In this work, an analysis was performed for implementation of small modular district heating system in Visoko, covering several public buildings and few neighborhoods in north-western part of town. Combination of different renewable energy sources were analyzed leading to an optimal and a very promising energy supply strategy due to its contribution to security of supply, financial stability, local economic development, local employment, etc. Possible financial savings for heating of 38% compared to current financial needs are determined. Structure optimization of solar collector holders was also performed, taking into account external influence, enabling savings in the structure material. This approach confirms feasibility of transition from traditional to renewable energy based heating system. Having in mind the modularity of such systems, similar solutions can be replicated in other South-Eastern European cities and other countries.


2019 ◽  
Vol 23 (3) ◽  
pp. 101-109
Author(s):  
Ilze Polikarpova ◽  
Dace Lauka ◽  
Dagnija Blumberga ◽  
Edgars Vigants

Abstract The research paper is focused on how to choose the most suitable renewable energy solution using multi-criteria analysis for a district heating system. Making choices is based on indicators – economic, environmental and social. In this case, the study used five indicators: resources costs, totals investments, reduction of greenhouse gas emissions, specific weight of renewable energy resources and impact on utilized land. Three situations have been compared – current situation: gas boiler, planned: solar collectors 21 595 m2 + accumulation tank 8000 m3 and alternatives: solar PV panels 5504 m2 – heat pump COP 3 are used in the estimation. The multi-criteria decision-making analysis shows that solar collectors 21 595 m2 + accumulation tank 8000 m3 are considered as the best alternative. The methodology is based on choosing a solution for a district heating company in Latvia.


2018 ◽  
Vol 30 ◽  
pp. 03001
Author(s):  
Maciej Knapik

The article presents an economic analysis and comparison of selected (district heating, natural gas, heat pump with renewable energy sources) methods for the preparation of domestic hot water in a building with low energy demand. In buildings of this type increased demand of energy for domestic hot water preparation in relation to the total energy demand can be observed. As a result, the proposed solutions allow to further lower energy demand by using the renewable energy sources. This article presents the results of numerical analysis and calculations performed mainly in MATLAB software, based on typical meteorological years. The results showed that system with heat pump and renewable energy sources Is comparable with district heating system.


Energy ◽  
2019 ◽  
Vol 167 ◽  
pp. 369-378 ◽  
Author(s):  
Mikko Kouhia ◽  
Timo Laukkanen ◽  
Henrik Holmberg ◽  
Pekka Ahtila

Sign in / Sign up

Export Citation Format

Share Document