Data and simulation studies on the influence of scintillation crystal dimensions on spectrometric parameters

2021 ◽  
pp. 110053
Author(s):  
A. El Hamli ◽  
A. Bazza ◽  
A. Moussa ◽  
M. Hamal ◽  
M. Zerfaoui ◽  
...  
Keyword(s):  
Simulation Studies ◽  
Scintillation Crystal

Benefits from Computerized Adaptive Testing as Seen in Simulation Studies

1999 ◽  
Vol 15 (2) ◽  
pp. 91-98 ◽  
Author(s):  
Lutz F. Hornke
Keyword(s):  
Measurement Error ◽  
Computerized Adaptive Testing ◽  
Test Procedure ◽  
Adaptive Testing ◽  
Parameter Estimates ◽  
Simulation Studies ◽  
Computerized Adaptive Test ◽  
Item Banks ◽  
Item Parameters ◽  
General Reliability

Summary: Item parameters for several hundreds of items were estimated based on empirical data from several thousands of subjects. The logistic one-parameter (1PL) and two-parameter (2PL) model estimates were evaluated. However, model fit showed that only a subset of items complied sufficiently, so that the remaining ones were assembled in well-fitting item banks. In several simulation studies 5000 simulated responses were generated in accordance with a computerized adaptive test procedure along with person parameters. A general reliability of .80 or a standard error of measurement of .44 was used as a stopping rule to end CAT testing. We also recorded how often each item was used by all simulees. Person-parameter estimates based on CAT correlated higher than .90 with true values simulated. For all 1PL fitting item banks most simulees used more than 20 items but less than 30 items to reach the pre-set level of measurement error. However, testing based on item banks that complied to the 2PL revealed that, on average, only 10 items were sufficient to end testing at the same measurement error level. Both clearly demonstrate the precision and economy of computerized adaptive testing. Empirical evaluations from everyday uses will show whether these trends will hold up in practice. If so, CAT will become possible and reasonable with some 150 well-calibrated 2PL items.

Adaptive Control Scheme for Coupled Tank Process

2018 ◽  
pp. 89-95
Author(s):  
Vinodhini M.
Keyword(s):  
Adaptive Control ◽  
Nonlinear Behaviour ◽  
Simulation Studies ◽  
Input Output ◽  
Control Scheme ◽  
Direct Model ◽  
Multivariable Process ◽  
Model Reference Adaptive ◽  
Siso System ◽  
Adaptive Control Scheme

The objective of this paper is to develop a Direct Model Reference Adaptive Control (DMRAC) algorithm for a MIMO process by extending the MIT rule adopted for a SISO system. The controller thus developed is implemented on Laboratory interacting coupled tank process through simulation. This can be regarded as the relevant process control in petrol and chemical industries. These industries involve controlling the liquid level and the flow rate in the presence of nonlinearity and disturbance which justifies the use of adaptive techniques such as DMRAC control scheme. For this purpose, mathematical models are obtained for each of the input-output combinations using white box approach and the respective controllers are developed. A detailed analysis on the performance of the chosen process with these controllers is carried out. Simulation studies reveal the effectiveness of proposed controller for multivariable process that exhibits nonlinear behaviour.

Global Effects Simulation Studies

1986 ◽  
Author(s):  
Ernest Bauer ◽  
Frank A. Albini ◽  
Craig Chandler
Keyword(s):  
Simulation Studies

Dynamic simulation of sludge blanket movements in a full-scale rectangular sedimentation basin

1996 ◽  
Vol 33 (1) ◽  
pp. 89-99 ◽  
Author(s):  
F. Göhle ◽  
A. Finnson ◽  
B. Hultman
Keyword(s):  
Dynamic Simulation ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Full Scale ◽  
Simulation Studies ◽  
Separation Processes ◽  
Sedimentation Basin ◽  
Near Future ◽  
Sludge Concentration

Bromma sewage treatment plant in Stockholm is the second largest plant in Stockholm and will in the near future have requirements for nitrogen removal. This means that a higher sludge age must be used in the aeration basin. This may be accomplished by an increase of the sludge concentration up to values until the limiting solids flux is exceeded. Measurement of the sludge blanket level is a possibility for better control of the sedimentation basin. Different measurements were performed to evaluate the main factors influencing the level. Dynamic simulation studies were performed at Bromma sewage treatment plant in Stockholm of the sludge blanket level and the return sludge concentration in a full-scale sedimentation basin. The simulations were performed with the help of a Danish simulation package, EFOR (1992), in which both reactions in the aeration basin (mainly based on the IAWPRC model) and separation processes in the sedimentation basin (both clarification and thickening) can be studied. The thickening model is based on the solids flux theory and the Vesilind formula (1979). Different methods were compared for determination and use of characteristic parameters in the Vesilind formula.

Sign in / Sign up

Export Citation Format

Share Document