Noncontact high sensitivity chipless tag microwave resonator for bitumen concentration measurement at high temperatures

Fuel ◽  
2020 ◽  
Vol 265 ◽  
pp. 116916 ◽  
Author(s):  
Masoud Baghelani ◽  
Zahra Abbasi ◽  
Mojgan Daneshmand
2012 ◽  
Vol 529 ◽  
pp. 487-491 ◽  
Author(s):  
Bao Hu Gu ◽  
Ze Fa Fang

At present , the catalytic combustion type gas sensors is still used in our country which is the extensive use of underground coal mine gas detection instrument , this kind of sensor slow response, calibration cycle is short, and the apparatus for the selectivity of methane is poor. Thus it can be seen that develop a safe and reliable, selective, high sensitivity of gas concentration measurement system that for mine safety operation, the personal safety and environment protection has a very important social significance and economic significance. Optical fiber sensing monitoring system according to the gas absorption spectrum principle with double light path structure on the mine gas online monitoring the concentration of the gas, has avoid the explosion, dust and so on many special advantages.


1966 ◽  
Vol 17 (1) ◽  
pp. 17 ◽  
Author(s):  
G Scurfield ◽  
EF Biddiscombe

Variation in the performance, morphology, and nitrogen content of lines of Phalaris tubevosa introduced from the Mediterranean region and of the Australian commercial line was examined. Regional differences existed in culm height, date of anthesis, seed weight, and nitrogen content of tops, but not in chromosome number. Comparison of six lines, one each from Australia, Morocco, Algeria, Turkey, Israel, and Greece, grown at four different temperatures, established the high sensitivity of the Israeli line to high temperatures, and the vigour of the Israeli and Moroccan lines under low temperatures. The Algerian line showed some sensitivity to high temperatures also, but generally lines other than the Israeli responded similarly to increasing temperature. Regional differences in yield, apical dominance (reflected in tiller number and ratio wt. primary shoot/wt. tops), and leaf size and shape were obtained under each of four temperature regimes in a second experiment involving 55 lines. In a field experiment, herbage yields from a Moroccan, an Algerian, and an Israeli line were compared with that of the Australian line grown in swards with Trifolium subterraneum and cut at intervals over 1 year. Lines differed in their response, but the introduced lines were no better than the Australian line. The results are discussed in relation to the agronomic utilization of P. tuberosa, the possible geographical origin of the Australian line, and the question as to how far results from glasshouse experiments have predictive value in field experiments.


Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 865
Author(s):  
Martin Brandl ◽  
Lisa-Marie Wagner

A sensor for biomedical markers based on a split ring microwave resonator (SRR) was developed. The surface of the microwave resonator is covered with receptors that specifically bind to the target proteins where the local permittivity is changed. The resonator is part of a microwave oscillator circuit. Changes in the local permittivity caused by coupling of the target proteins result in a change of oscillator frequency which can be easily and accurate measured with high sensitivity.


2016 ◽  
Vol 229 ◽  
pp. 528-533 ◽  
Author(s):  
Tay Ching En Marcus ◽  
Mohd Haniff Ibrahim ◽  
Nor Hafizah Ngajikin ◽  
Asrul Izam Azmi

2018 ◽  
Vol 11 (2) ◽  
pp. 166 ◽  
Author(s):  
E. F. L. Araújo ◽  
E. R. B. Souza

The Campomanesia genus has several species with high diversity of uses. C. adamantium is one such species with high economic potential due to the varied potential uses of fruits and other plant parts. Like most native Cerrado species, there is a lack of agronomic information that will enable the start of commercial crops, in this regard the information on growth and development of plants and propagation of this species should be prioritized. Now, the information we have of the Campomanesia genus allows us to relate the reproductive period with high temperatures and the begining of rains, but could not find data in the literature about C. adamantium. For most species in this genus, the usual way propagation is via seeds is, therefore important to determine the period during which the embryos are more apt to produce a good seedling, period known how physiological maturity. The correlation of physiological maturity of seeds with fruits aspects are more practical and simple ways to guide the collection of seeds. For this species are correlated with the total soluble solids. For other species of the genus, as C. xanthocarpa is possible to correlate the maturity of seeds with the color of the epicarp. Existing assessments on the use of seeds in the spread of C. adamantium reporting low germination rates, unsatisfactory development of plants in the field beyond the sensitivity of drying and storage, characteristics of recalcitrant seeds. In literature data showed maintaining the viability of C. adamantium when seed water content is levels approaching 15% but with high sensitivity to storage. Biometrical characteristics of fruits and seeds are also important in the search for high-quality propagation material, in addition to providing important information about the genetic variability of populations and identification of species of the same genus. Just the high physiological quality of seeds is not guarantee for the success on seedling emergence, the environmental conditions during the germination process are essential to the seed and seedling behavior. Among these external conditions, temperature and substrate are worth mentioning, there are optimal temperatures and substrates for the performance of the germination process of plant species. Temperature affects speed, rate and uniformity of germination while the substrate is the physical medium in which the seed is inserted and has the important function of maintaining the proper conditions for germination. For C. adamantium has been reported the highest percentage of germination at relatively high temperatures, 25 ° C, with a lack of data on promising substrates. This material gathered important information about phenology and sexual propagation of Myrtaceae family species, specially to gabiroba.


1994 ◽  
Vol 144 ◽  
pp. 21-28 ◽  
Author(s):  
G. B. Gelfreikh

AbstractA review of methods of measuring magnetic fields in the solar corona using spectral-polarization observations at microwaves with high spatial resolution is presented. The methods are based on the theory of thermal bremsstrahlung, thermal cyclotron emission, propagation of radio waves in quasi-transverse magnetic field and Faraday rotation of the plane of polarization. The most explicit program of measurements of magnetic fields in the atmosphere of solar active regions has been carried out using radio observations performed on the large reflector radio telescope of the Russian Academy of Sciences — RATAN-600. This proved possible due to good wavelength coverage, multichannel spectrographs observations and high sensitivity to polarization of the instrument. Besides direct measurements of the strength of the magnetic fields in some cases the peculiar parameters of radio sources, such as very steep spectra and high brightness temperatures provide some information on a very complicated local structure of the coronal magnetic field. Of special interest are the results found from combined RATAN-600 and large antennas of aperture synthesis (VLA and WSRT), the latter giving more detailed information on twodimensional structure of radio sources. The bulk of the data obtained allows us to investigate themagnetospheresof the solar active regions as the space in the solar corona where the structures and physical processes are controlled both by the photospheric/underphotospheric currents and surrounding “quiet” corona.


Author(s):  
Kazumichi Ogura ◽  
Michael M. Kersker

Backscattered electron (BE) images of GaAs/AlGaAs super lattice structures were observed with an ultra high resolution (UHR) SEM JSM-890 with an ultra high sensitivity BE detector. Three different types of super lattice structures of GaAs/AlGaAs were examined. Each GaAs/AlGaAs wafer was cleaved by a razor after it was heated for approximately 1 minute and its crosssectional plane was observed.First, a multi-layer structure of GaAs (100nm)/AlGaAs (lOOnm) where A1 content was successively changed from 0.4 to 0.03 was observed. Figures 1 (a) and (b) are BE images taken at an accelerating voltage of 15kV with an electron beam current of 20pA. Figure 1 (c) is a sketch of this multi-layer structure corresponding to the BE images. The various layers are clearly observed. The differences in A1 content between A1 0.35 Ga 0.65 As, A1 0.4 Ga 0.6 As, and A1 0.31 Ga 0.69 As were clearly observed in the contrast of the BE image.


Author(s):  
Z. L. Wang ◽  
J. Bentley

Studying the behavior of surfaces at high temperatures is of great importance for understanding the properties of ceramics and associated surface-gas reactions. Atomic processes occurring on bulk crystal surfaces at high temperatures can be recorded by reflection electron microscopy (REM) in a conventional transmission electron microscope (TEM) with relatively high resolution, because REM is especially sensitive to atomic-height steps.Improved REM image resolution with a FEG: Cleaved surfaces of a-alumina (012) exhibit atomic flatness with steps of height about 5 Å, determined by reference to a screw (or near screw) dislocation with a presumed Burgers vector of b = (1/3)<012> (see Fig. 1). Steps of heights less than about 0.8 Å can be clearly resolved only with a field emission gun (FEG) (Fig. 2). The small steps are formed by the surface oscillating between the closely packed O and Al stacking layers. The bands of dark contrast (Fig. 2b) are the result of beam radiation damage to surface areas initially terminated with O ions.


Sign in / Sign up

Export Citation Format

Share Document