A comparison of extraction yield, quality and thermal properties from Sapindus mukorossi seed oil between microwave assisted extraction and Soxhlet extraction

2021 ◽  
Vol 161 ◽  
pp. 113185
Author(s):  
Bin Hu ◽  
Xiaohui Xi ◽  
Haochen Li ◽  
Yvxian Qin ◽  
Cheng Li ◽  
...  
BioResources ◽  
2021 ◽  
Vol 16 (4) ◽  
pp. 8060-8081
Author(s):  
Jie Xu ◽  
Jianjun Wu ◽  
Juan Qi ◽  
Juan Li ◽  
Yongju Liu ◽  
...  

Flavonoids were extracted from Phyllostachys heterocycla leaves by adopting microwave-assisted extraction technology. Based on the single factor experiment and Plackett-Burman design results, the extraction process of flavonoids was further optimized using the response surface methodology. The optimum conditions were as follows: an ethanol concentration of 78.1%, an extraction time of 24.9 min, and a microwave power of 559 W. Under these conditions, the extraction yield of flavonoids was 4.67%, which was in close proximity to the predicted value (4.70%) and higher than the extraction yield from traditional Soxhlet extraction (3.35%). Moreover, the possible extraction mechanisms of these two extraction methods were further derived to explain why the microwave-assisted extraction of flavonoids was more efficient compared with traditional Soxhlet extraction. Ultimately, the antioxidant activities in vitro of flavonoids from Phyllostachys heterocycla leaves were evaluated via DPPH and ABTS radical scavenging assay. The flavonoids from Phyllostachys heterocycla leaves exhibited excellent antioxidant activities in vitro and Phyllostachys heterocycla leaves could be a new natural source for developing antioxidants. Overall, the findings of this research could provide a theoretical reference for the further comprehensive development and utilization of bamboo resources.


Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1516
Author(s):  
Rut Fernández-Marín ◽  
Susana C. M. Fernandes ◽  
María A. Andrés ◽  
Jalel Labidi

Curcuma root (Curcuma longa L.) is a very important plant in gastronomy and medicine for its unique antiseptic, anti-inflammatory, antimicrobial and antioxidant properties. Conventional methods for the extraction of curcuma oil require long extraction times and high temperatures that can degrade the active substances. Therefore, the objectives of the present study were: (i) first, to optimize the extraction yield of curcuma oil by applying a Box-Behnken experimental design using surface response methodology to the microwave-assisted extraction (MAE) technique (the independent variables studied were reaction time (10–30 min), microwave power (150–200 W) and curcuma powder/ethanol ratio (1:5–1:20; w/v); and, (ii) second, to assess the total phenolic content (TPC) and their antioxidant activity of the oil (at the optimum conditions point) and compare with the conventional Soxhlet technique. The optimum conditions for the MAE were found to be 29.99 min, 160 W and 1:20 w/v to obtain an optimum yield of 10.32%. Interestingly, the oil extracted by microwave-assisted extraction showed higher TPC and better antioxidant properties than the oil extracted with conventional Soxhlet technique. Thus, it was demonstrated that the method applied for extraction influences the final properties of the extracted Curcuma longa L. oil.


2013 ◽  
Vol 62 (3) ◽  
Author(s):  
Binta Jume Hadi ◽  
Mohd Marsin Sanagi ◽  
Wan Aini Wan Ibrahim ◽  
Shajarahtunnur Jamil ◽  
Mohammed Abdullahi Mu’azu

Conventional methods for the extraction of natural products from plant are characterised by the consumption of large volumes of solvent, energy, lengthy extraction procedures and the potentially deleterious degradation of labile compounds. In the last two decades there has been an increasing demand for new extraction techniques, amenable to automation, with shortened extraction times, reduced organic solvent consumption, prevention pollution in analytical laboratories and reducing sample preparation costs. Unmodified domestic microwave oven is used in the extraction of phenolicsfrom C. domestica Val. using water as solvent. The Microwave Assisted Extraction produced a better yield of crude extract of 48 mg compared to Soxhlet extraction methods with only an extraction yield 3.4 mg. Effects of extraction time, microwave power and solvent volume are evaluated on the extraction of phenolic compounds.


2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Hui Wang ◽  
Xiaodi Ma ◽  
Qibin Cheng ◽  
Xiaoli Xi ◽  
Liwei Zhang

Deep eutectic solvents (DESs) have attracted significant attention as green media for the extraction and separation of natural compounds from Chinese medicine. In this study, a hydrophobic DESs-based microwave-assisted extraction (MAE) was successfully used to efficiently extract baicalin from Scutellaria baicalensis Georgi. Firstly, DecA: N4444-Cl (DES-1 , molar ratio 1 : 2) was screened and selected as the most appropriate DES by comparing the extraction yield in different hydrophobic DESs. Based on the extraction yield of baicalin, response surface methodology (RSM) was employed to model and optimize the parameters (extraction temperature, liquid-solid ratio, and extraction time). Furthermore, the maximum yield of 106.96 mg·g−1 was achieved under optimum conditions in DES-containing aqueous solutions (33 vol% water content), which reached a similar level that was conducted using the pharmacopoeia procedure (104.94 mg·g−1). These results indicated that the proposed method is an excellent alternative for the extraction of baicalin.


2021 ◽  
Vol 302 ◽  
pp. 01009
Author(s):  
Chanatip Dejkajorn ◽  
Panawan Suttiarporn ◽  
Hussanai Sukkathanyawat ◽  
Kittisak Wichianwat ◽  
Saichon Sriphan ◽  
...  

Spent bleaching earth (SBE) which is generated from bleaching process is a valuable industrial waste of edible vegetable oil production because of residual edible vegetable oil absorbed. The residual oil in spent bleaching earth can be recovered and reused for application in the industries such as the production of biodiesel and lubricant. Currently, microwave-assisted extraction (MAE) technique is widely used because this method has a shorter extraction time and less solvent consumption when compared with traditional methods. In this study, MAE combined with solvent reflux was optimized using solvent screening experiments and response surface methodology (RSM) to obtain the highest yield of MAE extraction of residual soybean oil from spent bleaching earth. The extraction yield of residual soybean oil obtained from selected solvent were hexane-ethanol mixture (2:1 v/v, 10.19%) > hexane-ethanol mixture (1:1 v/v, 10.00%) >hexane-ethanol mixture (1:2 v/v, 9.98%) > hexane-ethanol mixture (1:3 v/v, 9.83%) > hexane-ethanol mixture (3:1 v/v, 8.59%) > hexane (8.17%) > acetone (7.73%). The regression coefficient (R-squared = 0.9852) expresses the accuracy of the regression and indicates the relationship between experimental data and predicted result, with high regression coefficient close to 1, which is remarkably desired. The experiment conditions for optimal MAE extraction of residual soybean oil from SBE were hexane-ethanol mixture (2:1 v/v), liquid to solid ratio 15.56:1 mL/g, extraction time 12.22 min, and microwave power 350 W. Under such conditions, the highest predicted value of the extraction yield of residual soybean oil was 10.43%.


2008 ◽  
Vol 91 (5) ◽  
pp. 1124-1129 ◽  
Author(s):  
Takamitsu Otake ◽  
Yoshie Aoyagi ◽  
Masahiko Numata ◽  
Takashi Yarita

Abstract The efficiency of microwave-assisted extraction (MAE) was evaluated for the analysis of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in fish. An isotope dilution method was used for quantification via analysis of the samples by gas chromatography and mass spectrometry. MAE solvent, temperature, and time were optimized, and observed concentrations were compared. The MAE results were also compared to those of other extraction techniques (Soxhlet extraction, pressurized liquid extraction, saponification, and homogenization). Concentrations of PCBs and OCPs obtained by MAE at 120C for 10 min were comparable to those by the other techniques. The results suggest that MAE can be used for the analysis of PCBs and OCPs in fish.


1996 ◽  
Vol 79 (1) ◽  
pp. 142-156 ◽  
Author(s):  
Viorica Lopez-A Vila ◽  
Richard Young ◽  
Nataly Teplitsky

Abstract Microwave-assisted extraction (MAE), Soxhlet, soni cation, and supercritical fluid extraction (SFE) were compared in their ability to extract 95 compounds listed in U.S. Environmental Protection Agency Method 8250. Freshly spiked soil samples and 2 standard reference materials were extracted with hexane-acetone (1 + 1) by MAE and Soxhlet extraction, with methylene chloride-acetone (1 + 1) by sonication extraction, and with supercritical carbondioxide modified with 10% methanol by SFE. Results indicate that MAE is a promising extraction technique. Of 94 compounds for which we are reporting data, 51 compounds gave MAE recoveries of >80%; 33,50-79%; 8,20-49%; and 2, <19%. Soxhlet extraction gave very similar results: 50 recoveries were >80%; 32,50-79%; 8,20-49%; and 4, <19%. Sonica tion recoveries were slightly higher: 63 values were >80%; 25,50-79%; 4,20-49%; and 2, <19%. SFE recoveries were the lowest: 37 values were >80%; 37, 50-79%; 12,20-49%, and 8, <19%. MAE gave the best precision: relative standard deviations (RSDs) were <10% for 90 of 94 compounds. Soxhlet extraction gave the worst precision: only 52 of 94 samples gave RSDs ≤10%. Although MAE looks promising, 15 polar basic compounds extracted at 115°C with hexane acetone for 10 min (1000 W power) gave poor recoveries. Because no technique gave acceptable recoveries for these polar compounds, we investigated their extraction with MAE using acetonitrile at 50° and 115°C. Ten of the 15 compounds were quantitatively recovered (>70%) with acetonitrile at 115°C.


Sign in / Sign up

Export Citation Format

Share Document