Optimization on Fracturing Fluid Flowback Model after Hydraulic Fracturing in Oil Well

2021 ◽  
pp. 108703
Author(s):  
Zhanqing Qu ◽  
Jiwei Wang ◽  
Tiankui Guo ◽  
Lin Shen ◽  
Hualin Liao ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Oil Well ◽  
Fracturing Fluid

Considerations for Using a Hydraulic Fracturing Fluid for Breaking Crude Oil Emulsion from Reservoir

2018 ◽  
Vol 69 (6) ◽  
pp. 1498-1500
Author(s):  
Lacramioara Olarasu ◽  
Maria Stoicescu ◽  
Ion Malureanu ◽  
Ion Onutu
Keyword(s):  
Hydraulic Fracturing ◽  
Crude Oil ◽  
Oil Production ◽  
Oil Field ◽  
Reservoir Rock ◽  
Oil Well ◽  
Strong Impact ◽  
Fracturing Fluid ◽  
Oil Emulsion ◽  
Oil Emulsions

In the oil industry, crude oil emulsions appear very frequently in almost all activities, starting with drilling and continuing with completion, production, transportation and processing. They are usually formed naturally or during oil production and their presence can have a strong impact on oil production and facilities. In this paper we addressed the problem of oil emulsions present in a reservoir with unfavorable flow properties. It is known that the presence of emulsions in a reservoir can influence both flow capacity and the quality of its crude oil, especially when they are associated with porous medium�s low values of permeability. Considering this, we have introduced a new procedure for selecting a special fluid of fracture. This fluid has two main roles: to create new flow paths from the reservoir rock to wells; to produce emulsion breaking of emulsified oil from pore of rocks. Best fracturing fluid performance was determined by laboratory tests. Selected fluid was then used to stimulate an oil well located on an oil field from Romania. In the final section of this paper,we are presenting a short analysis of the efficiency of the operation of hydraulic fracturing stimulation probe associated with the crude oil emulsion breaking process.

scholarly journals The Static Laboratory Testing for Fracturing Fluid Optimization

2021 ◽  
Vol 1 (1) ◽  
pp. 219-224
Author(s):  
Boni Swadesi ◽  
Ahmad Sobri ◽  
Dewi Asmorowati ◽  
Mia Feria Helmy ◽  
Ahmad Azhar ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Laboratory Testing ◽  
Oil Well ◽  
Fluid Sample ◽  
Field Scale ◽  
Fracturing Fluid ◽  
Laboratory Assessment ◽  
The Common ◽  
Breaking Time ◽  
Fluid Optimization

Hydraulic fracturing operation is the common method to stimulate an oil well in order to make the permeability around the well become higher by injecting a mixing of fracturing fluid and proppant. Hopefully, this higher permeability can contribute to increase the production of oil and/or gas. The fundamental laboratory assessment of fracturing fluid as a part of injected component is important to be conducted before field scale implementation. One of the fundamental assessment is the static laboratory testing. In this test, the fracturing fluid sample is measured to obtain the data about its properties such as water quality, rheology, crown time and breaking time. These properties give important role to calculate the performance of the hydraulic fracturing field scale operation would be. In this research, we conducted the static laboratory testing for fracturing fluid in sensitivity of concentration which are 35, 40 and 45 systems. Every concentration have been measured its properties in order to compare each other to evaluate and select best fracturing fluid candidate for field scale application.

scholarly journals Laboratory Testing of Fracture Conductivity Damage by Foam-Based Fracturing Fluids in Low Permeability Tight Gas Formations

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1783
Author(s):  
Klaudia Wilk-Zajdel ◽  
Piotr Kasza ◽  
Mateusz Masłowski
Keyword(s):  
Hydraulic Fracturing ◽  
Guar Gum ◽  
Polymer Concentration ◽  
Laboratory Research ◽  
Damage Effect ◽  
Tight Gas ◽  
Fracturing Fluid ◽  
Fracture Conductivity ◽  
Fracturing Fluids ◽  
Sandstone Rock

In the case of fracturing of the reservoirs using fracturing fluids, the size of damage to the proppant conductivity caused by treatment fluids is significant, which greatly influence the effective execution of hydraulic fracturing operations. The fracturing fluid should be characterized by the minimum damage to the conductivity of a fracture filled with proppant. A laboratory research procedure has been developed to study the damage effect caused by foamed and non-foamed fracturing fluids in the fractures filled with proppant material. The paper discusses the results for high quality foamed guar-based linear gels, which is an innovative aspect of the work compared to the non-foamed frac described in most of the studies and simulations. The tests were performed for the fracturing fluid based on a linear polymer (HPG—hydroxypropyl guar, in liquid and powder form). The rheology of nitrogen foamed-based fracturing fluids (FF) with a quality of 70% was investigated. The quartz sand and ceramic light proppant LCP proppant was placed between two Ohio sandstone rock slabs and subjected to a given compressive stress of 4000–6000 psi, at a temperature of 60 °C for 5 h. A significant reduction in damage to the quartz proppant was observed for the foamed fluid compared to that damaged by the 7.5 L/m3 natural polymer-based non-foamed linear fluid. The damage was 72.3% for the non-foamed fluid and 31.5% for the 70% foamed fluid, which are superior to the guar gum non-foamed fracturing fluid system. For tests based on a polymer concentration of 4.88 g/L, the damage to the fracture conductivity by the non-foamed fluid was 64.8%, and 26.3% for the foamed fluid. These results lead to the conclusion that foamed fluids could damage the fracture filled with proppant much less during hydraulic fracturing treatment. At the same time, when using foamed fluids, the viscosity coefficient increases a few times compared to the use of non-foamed fluids, which is necessary for proppant carrying capacities and properly conducted stimulation treatment. The research results can be beneficial for optimizing the type and performance of fracturing fluid for hydraulic fracturing in tight gas formations.

scholarly journals Performance Evaluation of Enzyme Breaker for Fracturing Applications under Simulated Reservoir Conditions

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3133
Author(s):  
Yuling Meng ◽  
Fei Zhao ◽  
Xianwei Jin ◽  
Yun Feng ◽  
Gangzheng Sun ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Shear Resistance ◽  
Ammonium Persulfate ◽  
Fracturing Fluid ◽  
Medium Temperature ◽  
Fracture Conductivity ◽  
Wide Range ◽  
Reservoir Conditions ◽  
Alkaline Conditions ◽  
Resistance Performance

Fracturing fluids are being increasingly used for viscosity development and proppant transport during hydraulic fracturing operations. Furthermore, the breaker is an important additive in fracturing fluid to extensively degrade the polymer mass after fracturing operations, thereby maximizing fracture conductivity and minimizing residual damaging materials. In this study, the efficacy of different enzyme breakers was examined in alkaline and medium-temperature reservoirs. The parameters considered were the effect of the breaker on shear resistance performance and sand-suspending performance of the fracturing fluid, its damage to the reservoir after gel breaking, and its gel-breaking efficiency. The experimental results verified that mannanase II is an enzyme breaker with excellent gel-breaking performance at medium temperatures and alkaline conditions. In addition, mannanase II did not adversely affect the shear resistance performance and sand-suspending performance of the fracturing fluid during hydraulic fracturing. For the same gel-breaking result, the concentration of mannanase II used was only one fifth of other enzyme breakers (e.g., mannanase I, galactosidase, and amylase). Moreover, the amount of residue and the particle size of the residues generated were also significantly lower than those of the ammonium persulfate breaker. Finally, we also examined the viscosity-reducing capability of mannanase II under a wide range of temperatures (104–158 °F) and pH values (7–8.5) to recommend its best-use concentrations under different fracturing conditions. The mannanase has potential for applications in low-permeability oilfield development and to maximize long-term productivity from unconventional oilwells.

Environmental impact and treatment of hydraulic fracturing in shale gas

2021 ◽  
Author(s):  
Heng Wang ◽  
Lifa Zhou
Keyword(s):  
Surface Water ◽  
High Risk ◽  
Water Resources ◽  
Hydraulic Fracturing ◽  
Environmental Impacts ◽  
Shale Gas ◽  
Pollution Sources ◽  
Fracturing Fluid ◽  
Geological Disasters ◽  
Surface Water And Groundwater

<p>Hydraulic fracturing is one of the key technologies to stimulate shale gas production and may have some environmental impacts while enhancing shale gas development. Through the introduction of hydraulic fracturing technology from the design and construction aspects, analysis of its potential adverse environmental impacts in water resource consumption, surface water and groundwater pollution, geological disasters, and other aspects, and based on the existing problems to form targeted solutions.</p><p>According to EIA report, during the stimulation process of shale gas fracturing, the amount of water resources is about 10,000m<sup>3</sup>, of which 20%-80% can be returned, and the flowback rate of Shale gas in China is 20%-60%, which means that at least 20%-40% polluted water containing various chemical raw materials will be hidden in the formation for a long time. The shale flowback rate in China is significantly lower than that in the United States, not only due to formation conditions, but also due to equipment and technology. In view of this situation, it is necessary to control the whole process from design to construction.</p><p>In the design process of hydraulic fracturing of shale gas, real-time control of the fracture range is carried out in conjunction with seismic monitoring and software simulation fitting, so as to reduce the consumption of water resources on the premise of achieving the purpose of increasing production. Especially, to reducing the fracturing program as much as possible in the water-scarce areas, so as to ensure the security of public water resources. Reduce the use of chemical additives to alleviate the pollution of surface water and groundwater. After detection of possible pollution, determine the amount of pollution sources on site and carry out comprehensive pollutant recovery and treatment. Strictly prohibit high-risk pollution sources from entering the fracturing fluid process. At the same time, the fracturing fluid is used to recycled and purified. In terms of geological disasters caused by fracturing, high-risk geological disaster zones should be identified and monitored in advance to prevent large-scale geological activities caused by micro-earthquakes caused by fracturing from causing uncontrollable geological disasters.</p>

Application of Heat Treatment to Prevent Fracturing Fluid-Induced Formation Damage and Enhance Matrix Permeability in Shale Gas Reservoirs

2021 ◽  
Author(s):  
Mingjun Chen ◽  
Peisong Li ◽  
Yili Kang ◽  
Xinping Gao ◽  
Dongsheng Yang ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Hydraulic Fracturing ◽  
Shale Gas ◽  
Gas Transport ◽  
Formation Damage ◽  
Transport Capacity ◽  
Fracturing Fluid ◽  
Gas Reservoir ◽  
Shale Gas Reservoir ◽  
The Matrix

Abstract The low flowback efficiency of fracturing fluid would severely increase water saturation in a near-fracture formation and limit gas transport capacity in the matrix of a shale gas reservoir. Formation heat treatment (FHT) is a state-of-the-art technology to prevent water blocking induced by fracturing fluid retention and accelerate gas desorption and diffusion in the matrix. A comprehensive understanding of its formation damage removal mechanisms and determination of production improvement is conducive to enhancing shale gas recovery. In this research, the FHT simulation experiment was launched to investigate the effect of FHT on gas transport capacity, the multi-field coupling model was established to determine the effective depth of FHT, and the numerical simulation model of the shale reservoir was established to analyze the feasibility of FHT. Experimental results show that the shale permeability and porosity were rising overall during the FHT, the L-1 permeability increased by 30- 40 times, the L-2 permeability increased by more than 100 times. The Langmuir pressure increased by 1.68 times and the Langmuir volume decreased by 26%, which means the methane desorption efficiency increased. Results of the simulation demonstrate that the FHT process can practically improve the effect of hydraulic fracturing and significantly increase the well production capacity. The stimulation mechanisms of the FHT include thermal stress cracking, organic matter structure changing, and aqueous phase removal. Furthermore, the special characteristics of the supercritical water such as the strong oxidation, can not be ignored, due to the FHT can assist the retained hydraulic fracturing fluid to reach the critical temperature and pressure of water and transform to the supercritical state. The FHT can not only alleviate the formation damage induced by the fracturing fluid, but also make good use of the retained fracturing fluid to enhance the permeability of a shale gas reservoir, which is an innovative method to dramatically enhance gas transport capacity in shale matrix.

scholarly journals Potential Use of Water Associated with Conventional Oil Production and Sea Water as Base Fluids for Hydraulic Fracturing Operations: Effect of Water Chemistry on Crosslinking and Breaking Behaviors of Guar Gum-Based Fracturing Fluid Formulations

2016 ◽  
Vol 6 (1) ◽  
pp. 31 ◽  
Author(s):  
Dayanand Saini ◽  
Timea Mezei
Keyword(s):  
Los Angeles ◽  
Hydraulic Fracturing ◽  
Water Chemistry ◽  
Fresh Water ◽  
Oil And Gas ◽  
Guar Gum ◽  
Sea Water ◽  
Oil Production ◽  
Fracturing Fluid ◽  
Conventional Oil

 Even though water consumption per hydraulic fracturing (or fracturing) job is relatively low; nearly all of the fresh water used for fracturing in California is in the regions of high water stress such as San Jouquin and Los Angeles Basins. However, water availability should not be a concern as huge volumes of water are being produced along with oil and gas from conventional formations (i.e. associated water) in the Kern County of California, a region where most of the fracturing activities take place. This associated water can potentially be used for preparing fracturing fluids in stimulating the unconventional formations. The present study reports on the relevant investigation done in this area of interest.The results suggest that associated water chemistry has limited effect on the viscosity of cross-linked formulations. However, guar gum concentration was found to affect the breaking behaviors of cross-linked fracturing fluid formulations. The new type of commercially available biodegradable breaker was found to be effective in breaking the tested cross-linked formulations at elevated temperature which was as high as 85°C (185°F). Both crosslinking and breaking behaviors of fracturing fluid formulations evaluated in this study were found comparable to the behaviors of commonly used cross-linked formulation (guar gum + 2% potassium chloride). These results suggest that both the associated water (i.e. water resulting from regional conventional oil production activites) and sea water (offshore oil fields) could serve as alternative sources of base fluid for use in fracturing jobs without putting significant burden on precious regional fresh water resources.

Sign in / Sign up

Export Citation Format

Share Document