Synthesis of CdWO4 thin films showing photoluminescence at room temperature by pulsed laser ablation using photoluminescenceless CdO/WO3 mixed oxide targets: effect of plume forming condition and target-substrate distance

1999 ◽  
Vol 140 (1-2) ◽  
pp. 138-143 ◽  
Author(s):  
Katsumi Tanaka ◽  
Daisuke Sonobe
Keyword(s):  
Thin Films ◽  
Laser Ablation ◽  
Mixed Oxide ◽  
Room Temperature ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Substrate Distance ◽  
Forming Condition

Early stages of the growth of BaTiO3 thin films studied by Transmission Electron Microscopy

1990 ◽  
Vol 48 (4) ◽  
pp. 706-707
Author(s):  
M. Grant Norton ◽  
Gerald R. English ◽  
Christopher Scarfone ◽  
C. Barry Carter
Keyword(s):  
Thin Films ◽  
Laser Ablation ◽  
Room Temperature ◽  
High Temperature Superconductors ◽  
Pulsed Laser ◽  
Target Material ◽  
Pulsed Laser Ablation ◽  
Cubic Phase ◽  
Transmission Electron ◽  
Tetragonal Form

Barium titanate (BaTiO3) may be used in a number of thin-film applications in electronic and optoelectronic devices. For these devices the formation of epitactic films of the correct stoichiometry and phase is essential. In particular, the tetragonal form of BaTiO3, which is stable at room temperature, exhibits ferro-, pyro- and piezoelectric properties. It is desirable to form films of the tetragonal phase directly and thus to avoid formation of either amorphous or polycrystalline material or to form material of the non-ferroelectric cubic phase. Recently two techniques, pulsed-laser ablation and reactive evaporation, have been used to form BaTiO3 thin-films. In the present study BaTiO3 thin-films have been formed using the pulsed-laser ablation technique. Pulsed-laser ablation is now widely used to produce thin-films of the high temperature superconductors and has many advantages over other techniques, in particular the formation of films which maintain the stoichiometry of the target material and by controlling the processing conditions the formation of films having defined crystalline phases.

Room-temperature deposition of nanocrystalline PbWO 4 thin films by pulsed laser ablation

2006 ◽  
Vol 84 (1-2) ◽  
pp. 181-185 ◽  
Author(s):  
J.H. Ryu ◽  
J.-W. Yoon ◽  
K.B. Shim ◽  
N. Koshizaki
Keyword(s):  
Thin Films ◽  
Laser Ablation ◽  
Room Temperature ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Temperature Deposition

Laser-Assisted Synthesis of Amorphous/Pseudoamorphous GaN Thin Films and Nanostructures

2006 ◽  
Vol 317-318 ◽  
pp. 585-588
Author(s):  
Seung Hwan Shim ◽  
Naoto Koshizaki ◽  
Jong Won Yoon ◽  
Kwang Bo Shim
Keyword(s):  
Thin Films ◽  
Heat Treatment ◽  
Laser Ablation ◽  
Chemical Composition ◽  
Room Temperature ◽  
Optical Band Gap ◽  
Laser Energy ◽  
Stoichiometric Composition ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation

Amorphous/pseudoamorphous GaN was prepared by pulsed-laser ablation at room temperature without any heat treatment. The structure and chemical composition of the specimens were systematically investigated. Laser ablation at low Ar pressure (<50Pa) led to deposition of smooth Ga-rich films, which is independent with laser energy. Under same pressures, as laser energy increased, the film stoichiometry changed from Ga-rich to near stoichiometric composition. Varying background Ar pressure strongly affected the product structure showing little effect on the chemical composition. Under higher pressure than 100 Pa, fine nanoparticles with a size of 5 nm rather than films were deposited on substrate due to the increased collision by plume confining. The optical band-gap of the deposited a-GaN is 2.8 eV for thin films and 3.9 eV for nanoparticles.

Microstructure and optical properties of nanocrystalline CaWO4 thin films deposited by pulsed laser ablation in room temperature

2007 ◽  
Vol 441 (1-2) ◽  
pp. 146-151 ◽  
Author(s):  
Jeong Ho Ryu ◽  
Sin Young Bang ◽  
Woo Sik Kim ◽  
Gyeong Seon Park ◽  
Kang Min Kim ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Laser Ablation ◽  
Room Temperature ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation

Observations on the growth of YBa2Cu3O7-δ thin films on MgO by pulsed-laser ablation

1991 ◽  
Vol 49 ◽  
pp. 1068-1069
Author(s):  
M. Grant Norton ◽  
C. Barry Carter
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Laser Ablation ◽  
Substrate Surface ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Laser Ablation Process ◽  
Deposition Parameters

Pulsed-laser ablation has been widely used to produce high-quality thin films of YBa2Cu3O7-δ on a range of substrate materials. The nonequilibrium nature of the process allows congruent deposition of oxides with complex stoichiometrics. In the high power density regime produced by the UV excimer lasers the ablated species includes a mixture of neutral atoms, molecules and ions. All these species play an important role in thin-film deposition. However, changes in the deposition parameters have been shown to affect the microstructure of thin YBa2Cu3O7-δ films. The formation of metastable configurations is possible because at the low substrate temperatures used, only shortrange rearrangement on the substrate surface can occur. The parameters associated directly with the laser ablation process, those determining the nature of the process, e g. thermal or nonthermal volatilization, have been classified as ‘primary parameters'. Other parameters may also affect the microstructure of the thin film. In this paper, the effects of these ‘secondary parameters' on the microstructure of YBa2Cu3O7-δ films will be discussed. Examples of 'secondary parameters' include the substrate temperature and the oxygen partial pressure during deposition.

Sign in / Sign up

Export Citation Format

Share Document