Late Palaeozoic to Early Cenozoic geological evolution of the northwestern German North Sea (Entenschnabel): New results and insights

2014 ◽  
Vol 93 (4) ◽  
pp. 147-174 ◽  
Author(s):  
Jashar Arfai ◽  
Fabian Jähne ◽  
Rüdiger Lutz ◽  
Dieter Franke ◽  
Christoph Gaedicke ◽  
...  
Keyword(s):  
North Sea ◽  
Lower Cretaceous ◽  
Late Jurassic ◽  
Structural Element ◽  
The North ◽  
Sedimentary Evolution ◽  
Basin Subsidence ◽  
The North Sea ◽  
Thickness Variations ◽  
Zechstein Salt

AbstractThe results of a detailed seismic mapping campaign of 13 horizons in the northwestern German North Sea, covering Late Permian to Palaeogene sedimentary successions, are presented. Based on the interpretation of four 3D and two 2D seismic surveys, thickness and depth maps of prominent stratigraphic units were constructed. These maps provide an overview of key structural elements, the sedimentation and erosion, and give insights into the evolution of the German Central Graben. The base of the Zechstein Group reaches a maximum depth of 7800 m within the German Central Graben. Lateral thickness variations in the Zechstein reflect the extensive mobilisation of Zechstein salt. Complex rift-related structures, with the Central Graben as the main structural element, were found not later than the Early Triassic. Up to 3000-m thick Triassic sediments are preserved in the eastern German Central Graben of which 1800 m consist of Keuper sediments. The Lower Buntsandstein unit shows increasing thicknesses towards the southeastern study area, likely related to distinct lateral subsidence. As a consequence of uplift of the North Sea Dome, Middle Jurassic sediments were eroded in large parts of the northwestern German North Sea and are only preserved in the German Central Graben. The NNW–SSE oriented John Basin is another important structural element, which shows maximum subsidence during the Late Jurassic. In most parts of the study area Lower Cretaceous sediments are absent due to either erosion or non-deposition. Lower Cretaceous deposits are preserved in the Outer Rough Basin in the northwest and within the German Central Graben. Upper Cretaceous sediments are found at depths between 1500 and 3600 m, reaching a maximum thickness of approximately 1600 m on the Schillgrund High. Contraction and inversion of pre-existing Mesozoic faults during the Late Cretaceous is distinct at the Schillgrund Fault, i.e. the eastern border fault of the Central Graben. The Palaeogene is predominantly a period of strong basin subsidence. Within 37 Myrs, up to 1400 m of Palaeogene sediments were deposited in the northwesternmost part of the study area. Detailed mapping of salt structures enables a reconstruction of halokinetic movements over time and a deciphering of the influence of the Zechstein salt on the sedimentary evolution during the Mesozoic and Cenozoic. Increasing sediment thicknesses in rim-synclines indicate that most of the salt structures in the German Central Graben had their main growth phase during the Late Jurassic.

scholarly journals Upper Jurassic – Lower Cretaceous of the Danish Central Graben: structural framework and nomenclature

2003 ◽  
Vol 1 ◽  
pp. 231-246 ◽  
Author(s):  
Peter Japsen ◽  
Peter Britze ◽  
Claus Andersen
Keyword(s):  
North Sea ◽  
Early Cretaceous ◽  
Lower Cretaceous ◽  
Late Jurassic ◽  
Upper Jurassic ◽  
The South ◽  
Structural Element ◽  
Maximum Thickness ◽  
The North ◽  
Half Graben

The Danish Central Graben is part of the mainly Late Jurassic complex of grabens in the central and southern North Sea which form the Central Graben. The tectonic elements of the Danish Central Graben in the Late Jurassic are outlined and compared to those in the Early Cretaceous based on reduced versions of published maps (1:200 000), compiled on the basis of all 1994 public domain seismic and well data. The Tail End Graben, a half-graben which stretches for about 90 km along the East North Sea High, is the dominant Late Jurassic structural feature. The Rosa Basin (new name) is a narrow, north–south-trending basin extending from the south-western part of the Tail End Graben. The Tail End Graben ceased to exist as a coherent structural element during the Early Cretaceous and developed into three separate depocentres: the Iris and Gulnare Basins to the north and the Roar Basin to the south (new names). The Early Cretaceous saw a shift from subsidence focused along the East North Sea High during the Late Jurassic to a more even distribution of minor basins within the Danish Central Graben. The depth to the top of the Upper Jurassic – lowermost Cretaceous Farsund Formation reaches a maximum of 4800 m in the northern part of the study area, while the depth to the base of the Upper Jurassic reaches 7500 m in the Tail End Graben, where the Upper Jurassic attains a maximum thickness of 3600 m. The Lower Cretaceous Cromer Knoll Group attains a maximum thickness of 1100 m in the Outer Rough Basin.

scholarly journals Geological evolution of the Chalk Group in the northern Dutch North Sea: inversion, sedimentation and redeposition

2018 ◽  
Vol 156 (07) ◽  
pp. 1265-1284
Author(s):  
EVA VAN DER VOET ◽  
LEONORA HEIJNEN ◽  
JOHN J. G. REIJMER
Keyword(s):  
North Sea ◽  
Late Cretaceous ◽  
Seismic Survey ◽  
Structural Elements ◽  
The North ◽  
Show Evidence ◽  
New Finding ◽  
The North Sea ◽  
Thickness Variations ◽  
Well Data

AbstractIn contrast to the Norwegian and Danish sectors, where significant hydrocarbon reserves were found in chalk reservoirs, limited studies exist analysing the chalk evolution in the Dutch part of the North Sea. To provide a better understanding of this evolution, a tectono-sedimentary study of the Late Cretaceous to Early Palaeogene Chalk Group in the northern Dutch North Sea was performed, facilitated by a relatively new 3D seismic survey. Integrating seismic and biostratigraphic well data, seven chronostratigraphic units were mapped, allowing a reconstruction of intra-chalk geological events.The southwestward thickening of the Turonian sequence is interpreted to result from tilting, and the absence of Coniacian and Santonian sediments in the western part of the study area is probably the result of non-deposition. Seismic truncations show evidence of a widespread inversion phase, the timing of which differs between the structural elements. It started at the end of the Campanian followed by a second pulse during the Maastrichtian, a new finding not reported before. After subsidence during the Maastrichtian and Danian, renewed inversion and erosion occurred at the end of the Danian. Halokinesis processes resulted in thickness variations of chalk units of different ages.In summary, variations in sedimentation patterns in the northern Dutch North Sea relate to the Sub-Hercynian inversion phase during the Campanian and Maastrichtian, the Laramide inversion phase at the end of the Danian, and halokinesis processes. Additionally, the Late Cretaceous sea floor was characterized by erosion through contour bottom currents at different scales and resedimentation by slope failures.

Lithology and subsidence in the North Sea

1982 ◽  
Vol 305 (1489) ◽  
pp. 85-99 ◽  
Keyword(s):  
North Sea ◽  
Late Jurassic ◽  
Late Carboniferous ◽  
Delta Front ◽  
Submarine Fans ◽  
The North ◽  
Late Tertiary ◽  
Moray Firth ◽  
Deltaic Sedimentation ◽  
The North Sea

The North Sea sedimentary basin has developed on the northwestern margin of the European tectonic plate and contains an almost continuous record of epeirogenic marine and deltaic sedimentation from Carboniferous to Recent times. The subsidence required to accommodate the pile of sediment deposited, which in places exceeds 12 km, has been brought about at various times and in various places by differing geodynamical processes. As a result the types of sedimentary rocks deposited vary widely both in time and space, but the nature of the mechanism is reflected in the sedimentary type deposited. The following broad generalizations can be made. The late Carboniferous was a period of deltaic sedimentation during which eustatic changes in sea level or local variations in subsidence rates are reflected in the typical Coal Measures swamp deposits. Late Carboniferous - early Permian times saw the silting up of this basin, and in an arid climate aeolian sands were deposited grading laterally to sabkha shales and evaporites. The Permian culminated in a series of widespread marine incursions during which repetitive evaporites were deposited. Triassic times were marked by a period of major rifting and the deposition of thick sequences of continental elastics in the north, while widespread marine sedimentation persisted in southern areas. Jurassic times saw the re-establishment of marine to deltaic deposition in a series of basins possibly controlled in their distribution by the Triassic fault systems. Late Jurassic deposits were laid down in a sea whose bathymetry reflected the structure of the underlying horsts and grabens inherited from Triassic times, and towards the close of the Jurassic the bottom waters at least of this sea become increasingly stagnant. Sands deposited during the late Jurassic were deposited as near-shore marine bars, beach sands, and proximal and distal submarine fans. Triassic to early Cretaceous deposition was concentrated in the areas now occupied by the main grabens of the North Sea, i.e. the Viking, Central and Moray - Witch Ground grabens. Subsequent deposition in late Cretaceous to Tertiary times took place in a more widely subsiding area, resulting in progressive onlap onto the surrounding basin margins. Deposition within this broadly subsiding and relatively unfaulted basin is characterized by chalky limestones in southern areas, giving way laterally to shales and minor sands to the north. During early Tertiary times a large delta was formed in the area beneath the present Moray Firth, and from this delta a supply of sand was fed into submarine fans to the northeast and southeast of the delta front. Late Tertiary deposition is largely represented by a monotonous sequence of marine shales.

scholarly journals Lower Cretaceous calcareous nannofossil biostratigraphy in the Danish Central Trough

1987 ◽  
Vol 20 ◽  
pp. 1-89
Author(s):  
Erik Thomsen
Keyword(s):  
North Sea ◽  
Lower Cretaceous ◽  
Calcareous Nannofossils ◽  
Northern Germany ◽  
The North ◽  
Lower Aptian ◽  
Upper Hauterivian ◽  
Central Trough ◽  
The North Sea ◽  
Calcareous Nannofossil Biostratigraphy

Calcareous nannofossils are described from Lower Cretaceous strata of four borings in the Central Trough of the Danish North Sea sector, and from three Aptian units on Helgoland and at Sarstedt, northern Germany. The assemblages range in age from Upper Hauterivian to Albian-?Cenomanian. Abundances of calcareous nannofossils varied considerably throughout the investigated sequences. They were rock-forming in several Lower Barremian - Aptian sediments, but rare or lacking in many of the Hauterivian and Albian strata. The Middle Barremian - Lower Aptian assemblages were often dominated by nannoconids. Preservation was generally bad in chalk and good in marl deposits. Some finely laminated black sediments yielded extremely well-preserved assemblages. One hundred and sixteen species were recognized. Eighteen species were selected as biostratigraphically particularly useful and their chronostratigraphic ranges are shown and discussed. The ages of the investigated sequences were determined on the basis of the selected nannofossil events. Some distinct sedimentary units in the North Sea could be correlated with time-equivalent formations in eastern England and northern Germany.

scholarly journals Early Cretaceous

1982 ◽  
Vol 8 ◽  
pp. 45-49
Author(s):  
Jens Morgen Hansen ◽  
Arne Buch
Keyword(s):  
North Sea ◽  
Early Cretaceous ◽  
Late Cretaceous ◽  
Late Jurassic ◽  
Significant Feature ◽  
Marine Clay ◽  
The North ◽  
Marine Sand ◽  
The North Sea ◽  
Early Late

The Early Cretaceous sea primarily covered the same basinal regions as the Late Jurassic sea but, late in the Early Cretaceous the sea also covered Late Jurassic land masses. During Early Cretaceous time the topography of the North Sea region became gradually buried. The following major transgression comprises the transition Early/Late Cretaceous. At the Jurassic/ Cretaceous transition, the Late Cimmerian unconformity is a significant feature (fig. 24), known from large parts of the North Sea region. The subsequent transgression and sedimentation of marine clay (the Valhall Formation), and marine sand (the LC-1 Unit), started late in Late Jurassic. Therefore, the formations described in the present chapter also comprise sediments of Late Jurassic age. Thicknesses of the Lower Cretaceous sediments are given in fig. 15.

Sign in / Sign up

Export Citation Format

Share Document