scholarly journals Revealing the planar chemistry of two-dimensional heterostructures at the atomic level

2015 ◽  
Vol 6 (1) ◽  
Author(s):  
Harry Chou ◽  
Ariel Ismach ◽  
Rudresh Ghosh ◽  
Rodney S. Ruoff ◽  
Andrei Dolocan
Keyword(s):  
Secondary Ion Mass Spectrometry ◽  
Structural Information ◽  
Layer Structure ◽  
Atomic Level ◽  
Chemical Information ◽  
Two Dimensional ◽  
Force Microscopy ◽  
System A ◽  
Atomic Force

Abstract Two-dimensional (2D) atomic crystals and their heterostructures are an intense area of study owing to their unique properties that result from structural planar confinement. Intrinsically, the performance of a planar vertical device is linked to the quality of its 2D components and their interfaces, therefore requiring characterization tools that can reveal both its planar chemistry and morphology. Here, we propose a characterization methodology combining (micro-) Raman spectroscopy, atomic force microscopy and time-of-flight secondary ion mass spectrometry to provide structural information, morphology and planar chemical composition at virtually the atomic level, aimed specifically at studying 2D vertical heterostructures. As an example system, a graphene-on-h-BN heterostructure is analysed to reveal, with an unprecedented level of detail, the subtle chemistry and interactions within its layer structure that can be assigned to specific fabrication steps. Such detailed chemical information is of crucial importance for the complete integration of 2D heterostructures into functional devices.

In as a Surfactant for the Growth of AlGaN/GaN Heterostructures by Plasma Assisted MBE

2002 ◽  
Vol 743 ◽  
Author(s):  
E. Monroy ◽  
N. Gogneau ◽  
E. Bellet-Amalnc ◽  
F. Enjalbert ◽  
J. Barjon ◽  
...  
Keyword(s):  
Molecular Beam ◽  
Growth Conditions ◽  
Molecular Beam Epitaxy Growth ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Dimensional Growth

ABSTRACTIn this paper, we study the surfactant capability of In for the growth of AlGaN/GaN heterostructures by plasma-assisted molecular beam epitaxy. Growth conditions were determined to have a self-regulated 1×1 In adlayer on AlxGa1-xN (0001). The presence of this In film favors two dimensional growth of AlGaN under stoichiometric conditions, and inhibits the formation of metal droplets on the surface. The quality of these layers was assessed by high resolution X-ray diffraction, atomic force microscopy and photoluminescence.

scholarly journals Aluminum Nitride Nanofilms by Atomic Layer Deposition Using Alternative Precursors Hydrazinium Chloride and Triisobutylaluminum

Coatings ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 954
Author(s):  
Rashid Dallaev ◽  
Dinara Sobola ◽  
Pavel Tofel ◽  
Ľubomir Škvarenina ◽  
Petr Sedlák
Keyword(s):  
Atomic Layer Deposition ◽  
Photoelectron Spectroscopy ◽  
Secondary Ion Mass Spectrometry ◽  
Atomic Layer ◽  
Nitrogen Atmosphere ◽  
Force Microscopy ◽  
Atomic Force ◽  
Layer Deposition ◽  
Secondary Ion

The aim of this study is motivated by the pursuit to investigate the performance of new and as yet untested precursors such as hydrazinium chloride (N2H5Cl) and triisobutylaluminum Al(C4H9)3 in the AlN atomic layer deposition (ALD) process as well as to study effects of successive annealing on the quality of the resulting layer. Both precursors are significantly cheaper than their conventional counterparts while also being widely available and can boast easy handling. Furthermore, Al(C4H9)3 being a rather large molecule might promote steric hindrance and prevent formation of undesired hydrogen bonds. Chemical analysis is provided by X-ray photoelectron spectroscopy (XPS) and secondary-ion mass spectrometry (SIMS) techniques; surface morphology was studied using atomic force microscopy (AFM). Chlorine containing precursors such as AlCl3 are usually avoided in ALD process due to the risk of chamber contamination. However, experimental data of this study demonstrated that the use of N2H5Cl does not result in chlorine contamination due to the fact that temperature needed for HCl molecules to become reactive cannot be reached within the AlN ALD window (200–350 °C). No amount of chlorine was detected even by the most sensitive techniques such as SIMS, meaning it is fully removed out of the chamber during purge stages. A part of the obtained samples was subjected to annealing (1350 °C) to study effects of high-temperature processing in nitrogen atmosphere, the comparisons with unprocessed samples are provided.

Surface roughness measurements of vanadium-contaminated fluidized cracking catalysts by atomic force microscopy

1996 ◽  
Vol 54 ◽  
pp. 866-867
Author(s):  
H. Kinney ◽  
M.L. Occelli ◽  
S.A.C. Gould
Keyword(s):  
Surface Roughness ◽  
Zeolite Y ◽  
Atomic Level ◽  
Microporous Structure ◽  
Contact Mode ◽  
Force Microscopy ◽  
Atomic Force ◽  
Before And After ◽  
Roughness Measurements ◽  
Cracking Catalysts

For this study we have used a contact mode atomic force microscope (AFM) to study to topography of fluidized cracking catalysts (FCC), before and after contamination with 5% vanadium. We selected the AFM because of its ability to well characterize the surface roughness of materials down to the atomic level. It is believed that the cracking in the FCCs occurs mainly on the catalysts top 10-15 μm suggesting that the surface corrugation could play a key role in the FCCs microactivity properties. To test this hypothesis, we chose vanadium as a contaminate because this metal is capable of irreversibly destroying the FCC crystallinity as well as it microporous structure. In addition, we wanted to examine the extent to which steaming affects the vanadium contaminated FCC. Using the AFM, we measured the surface roughness of FCCs, before and after contamination and after steaming.We obtained our FCC (GRZ-1) from Davison. The FCC is generated so that it contains and estimated 35% rare earth exchaged zeolite Y, 50% kaolin and 15% binder.

scholarly journals Magnetic Driven Two-Finger Micro-Hand with Soft Magnetic End-Effector for Force-Controlled Stable Manipulation in Microscale

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 410
Author(s):  
Dan Liu ◽  
Xiaoming Liu ◽  
Pengyun Li ◽  
Xiaoqing Tang ◽  
Masaru Kojima ◽  
...  
Keyword(s):  
Magnetic Force ◽  
Force Feedback ◽  
Soft Magnetic ◽  
End Effector ◽  
Force Microscopy ◽  
System A ◽  
Atomic Force ◽  
Afm Probe ◽  
End Effectors ◽  
Fixed End

In recent years, micromanipulators have provided the ability to interact with micro-objects in industrial and biomedical fields. However, traditional manipulators still encounter challenges in gaining the force feedback at the micro-scale. In this paper, we present a micronewton force-controlled two-finger microhand with a soft magnetic end-effector for stable grasping. In this system, a homemade electromagnet was used as the driving device to execute micro-objects manipulation. There were two soft end-effectors with diameters of 300 μm. One was a fixed end-effector that was only made of hydrogel, and the other one was a magnetic end-effector that contained a uniform mixture of polydimethylsiloxane (PDMS) and paramagnetic particles. The magnetic force on the soft magnetic end-effector was calibrated using an atomic force microscopy (AFM) probe. The performance tests demonstrated that the magnetically driven soft microhand had a grasping range of 0–260 μm, which allowed a clamping force with a resolution of 0.48 μN. The stable grasping capability of the magnetically driven soft microhand was validated by grasping different sized microbeads, transport under different velocities, and assembly of microbeads. The proposed system enables force-controlled manipulation, and we believe it has great potential in biological and industrial micromanipulation.

Structural and Optical Properties of InAsSbBi Grown by Molecular Beam Epitaxy on Offcut GaSb Substrates

Photonics ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 215
Author(s):  
Rajeev R. Kosireddy ◽  
Stephen T. Schaefer ◽  
Marko S. Milosavljevic ◽  
Shane R. Johnson
Keyword(s):  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Optical Quality ◽  
X Ray Diffraction ◽  
Interface Quality ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Lateral Variations

Three InAsSbBi samples are grown by molecular beam epitaxy at 400 °C on GaSb substrates with three different offcuts: (100) on-axis, (100) offcut 1° toward [011], and (100) offcut 4° toward [011]. The samples are investigated using X-ray diffraction, Nomarski optical microscopy, atomic force microscopy, transmission electron microscopy, and photoluminescence spectroscopy. The InAsSbBi layers are 210 nm thick, coherently strained, and show no observable defects. The substrate offcut is not observed to influence the structural and interface quality of the samples. Each sample exhibits small lateral variations in the Bi mole fraction, with the largest variation observed in the on-axis growth. Bismuth rich surface droplet features are observed on all samples. The surface droplets are isotropic on the on-axis sample and elongated along the [011¯] step edges on the 1° and 4° offcut samples. No significant change in optical quality with offcut angle is observed.

scholarly journals High resolution nanoscale chemical analysis of bitumen surface microstructures

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ayse N. Koyun ◽  
Julia Zakel ◽  
Sven Kayser ◽  
Hartmut Stadler ◽  
Frank N. Keutsch ◽  
...  
Keyword(s):  
Secondary Ion Mass Spectrometry ◽  
Force Microscopy ◽  
Photo Oxidation ◽  
Atomic Force ◽  
Para Phase ◽  
Key Sites ◽  
Respective Surface ◽  
Surface Domains ◽  
Surface Microstructures ◽  
First Time

AbstractSurface microstructures of bitumen are key sites in atmospheric photo-oxidation leading to changes in the mechanical properties and finally resulting in cracking and rutting of the material. Investigations at the nanoscale remain challenging. Conventional combination of optical microscopy and spectroscopy cannot resolve the submicrostructures due to the Abbe restriction. For the first time, we report here respective surface domains, namely catana, peri and para phases, correlated to distinct molecules using combinations of atomic force microscopy with infrared spectroscopy and with correlative time of flight—secondary ion mass spectrometry. Chemical heterogeneities on the surface lead to selective oxidation due to their varying susceptibility to photo-oxidation. It was found, that highly oxidized compounds, are preferentially situated in the para phase, which are mainly asphaltenes, emphasising their high oxidizability. This is an impressive example how chemical visualization allows elucidation of the submicrostructures and explains their response to reactive oxygen species from the atmosphere.

Mechanical Interlocking on Leadframe Surface for Bondability of Au Wedge Bond

2016 ◽  
Vol 857 ◽  
pp. 79-82
Author(s):  
Roslina Ismail ◽  
Fuaida Harun ◽  
Azman Jalar ◽  
Shahrum Abdullah
Keyword(s):  
Optical Microscope ◽  
Bonding Process ◽  
Mechanical Interlocking ◽  
Average Roughness ◽  
Force Microscopy ◽  
Atomic Force ◽  
Surface Morphologies ◽  
Scanning Electron ◽  
Effect Of Surface

This work is a contribution towards the understanding of wire bond integrity and reliability in relation to their microstructural and mechanical properties in semiconductor packaging.The effect of surface roughness and hardness of leadframe on the bondability of Au wedge bond still requires detail analysis. Two type of leadframes namely leadframe A and leadframe B were chosen and scanning electron microscope (SEM) and optical microscope were used to inspect the surface morphology of leadframes and the quality of created Au wedge bond after wire bonding process. It was found that there were significant differences in the surface morphologies between these two leadframes. The atomic force microscopy (AFM) which was utilized to measure the average roughness, Ra of lead finger confirms that leadframe A has the highest Ra with value of 166.46 nm compared to that of leadframe B with value of 85.89 nm. While hardness value of different lead finger from the selected leadframe A and B obtained using Vicker microhardness tester are 180.9 VH and 154.2VH respectively.

scholarly journals Osteoblast-Like Cell Behavior on Porous Scaffolds Based on Poly(styrene) Fibers

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Andrada Serafim ◽  
Romain Mallet ◽  
Florence Pascaretti-Grizon ◽  
Izabela-Cristina Stancu ◽  
Daniel Chappard
Keyword(s):  
Interference Microscopy ◽  
Porous Scaffolds ◽  
Allogenic Bone ◽  
Force Microscopy ◽  
Atomic Force ◽  
Dry Spinning ◽  
Bone Trabeculae ◽  
Large Bone

Scaffolds of nonresorbable biomaterials can represent an interesting alternative for replacing large bone defects in some particular clinical cases with massive bone loss. Poly(styrene) microfibers were prepared by a dry spinning method. They were partially melted to provide 3D porous scaffolds. The quality of the material was assessed by Raman spectroscopy. Surface roughness was determined by atomic force microscopy and vertical interference microscopy. Saos-2 osteoblast-like cells were seeded on the surface of the fibers and left to proliferate. Cell morphology, evaluated by scanning electron microscopy, revealed that they can spread and elongate on the rough microfiber surface. Porous 3D scaffolds made of nonresorbable poly(styrene) fibers are cytocompatible biomaterials mimicking allogenic bone trabeculae and allowing the growth and development of osteoblast-like cellsin vitro.

scholarly journals Tip-Based Nanomachining on Thin Films: A Mini Review

2021 ◽  
Author(s):  
Shunyu Chang ◽  
Yanquan Geng ◽  
Yongda Yan
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Data Storage ◽  
Three Dimensional ◽  
Maintenance Cost ◽  
Two Dimensional ◽  
Force Microscopy ◽  
Atomic Force ◽  
Current State ◽  
Two Dimensional Materials

AbstractAs one of the most widely used nanofabrication methods, the atomic force microscopy (AFM) tip-based nanomachining technique offers important advantages, including nanoscale manipulation accuracy, low maintenance cost, and flexible experimental operation. This technique has been applied to one-, two-, and even three-dimensional nanomachining patterns on thin films made of polymers, metals, and two-dimensional materials. These structures are widely used in the fields of nanooptics, nanoelectronics, data storage, super lubrication, and so forth. Moreover, they are believed to have a wide application in other fields, and their possible industrialization may be realized in the future. In this work, the current state of the research into the use of the AFM tip-based nanomachining method in thin-film machining is presented. First, the state of the structures machined on thin films is reviewed according to the type of thin-film materials (i.e., polymers, metals, and two-dimensional materials). Second, the related applications of tip-based nanomachining to film machining are presented. Finally, the current situation of this area and its potential development direction are discussed. This review is expected to enrich the understanding of the research status of the use of the tip-based nanomachining method in thin-film machining and ultimately broaden its application.

Sign in / Sign up

Export Citation Format

Share Document