scholarly journals Structural and morphological tuning of Cu-based metal oxide nanoparticles by a facile chemical method and highly electrochemical sensing of sulphite

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Velayutham Sudha ◽  
Govindhasamy Murugadoss ◽  
Rangasamy Thangamuthu
Keyword(s):  
Crystal Structures ◽  
Chemical Method ◽  
Metal Oxide Nanoparticles ◽  
Modified Electrodes ◽  
Electrochemical Sensing ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
One Step

AbstractA facile one-step chemical method is introduced for the successful synthesis of Cu2O, CuO and CuNa2(OH)4 crystal structures and their electrochemical properties were also investigated. X-ray diffraction studies revealed that these copper-based oxide nanoparticles display different crystal structures such as cubic (Cu2O), monoclinic (CuO) and orthorhombic [CuNa2(OH)4]. The microstructural information of nanoparticles was investigated by transmission electron microscopy. It shows attractive morphologies of different orientation such as rod like structure, nanobeads and well-aligned uniform nanorod for Cu2O, CuO and CuNa2(OH)4, respectively. Electrochemical sensing of sulphite (SO32−) on these three copper-based oxide modified electrodes was investigated. Among the three different crystal structures, CuO shows promising electrocatalytic activity towards oxidation of sulphite. A linear variation in peak current was obtained for SO32− oxidation from 0.2 to 15 mM under the optimum experimental condition. The sensitivity and detection limit were in the order of 48.5 µA cm−2 mM−1 and 1.8 µM, respectively. Finally, practical utility of CuO modified electrode was demonstrated for the estimation of sulphite in commercial wine samples.

scholarly journals From iron coordination compounds to metal oxide nanoparticles

2016 ◽  
Vol 7 ◽  
pp. 2074-2087 ◽  
Author(s):  
Mihail Iacob ◽  
Carmen Racles ◽  
Codrin Tugui ◽  
George Stiubianu ◽  
Adrian Bele ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Metal Oxide Nanoparticles ◽  
Mixed Valence ◽  
Iron Complex ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

Various types, shapes and sizes of iron oxide nanoparticles were obtained depending on the nature of the precursor, preparation method and reaction conditions. The mixed valence trinuclear iron acetate, [Fe2 IIIFeIIO(CH3COO)6(H2O)3]·2H2O (FeAc1), μ3-oxo trinuclear iron(III) acetate, [Fe3O(CH3COO)6(H2O)3]NO3∙4H2O (FeAc2), iron furoate, [Fe3O(C4H3OCOO)6(CH3OH)3]NO3∙2CH3OH (FeF), iron chromium furoate, FeCr2O(C4H3OCOO)6(CH3OH)3]NO3∙2CH3OH (FeCrF), and an iron complex with an original macromolecular ligand (FePAZ) were used as precursors for the corresponding oxide nanoparticles. Five series of nanoparticle samples were prepared employing either a classical thermal pathway (i.e., thermal decomposition in solution, solvothermal method, dry thermal decomposition/calcination) or using a nonconventional energy source (i.e., microwave or ultrasonic treatment) to convert precursors into iron oxides. The resulting materials were structurally characterized by wide-angle X-ray diffraction and Fourier transform infrared, Raman, energy-dispersive X-ray, and X-ray fluorescence spectroscopies, as well as thermogravimetric analysis. The morphology was characterized by transmission electron microscopy, atomic force microscopy and dynamic light scattering. The parameters were varied within each route to fine tune the size and shape of the formed nanoparticles.

Transmission electron microscope studies in special ceramics

1978 ◽  
Vol 36 (1) ◽  
pp. 268-269
Author(s):  
A. Zangvil ◽  
L.J. Gauckler ◽  
G. Schneider ◽  
M. Rühle
Keyword(s):  
Phase Diagrams ◽  
Crystal Structures ◽  
Thin Foil ◽  
Limited Extent ◽  
Complex Materials ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Electron Microscopes ◽  
Lattice Resolution

The use of high temperature special ceramics which are usually complex materials based on oxides, nitrides, carbides and borides of silicon and aluminum, is critically dependent on their thermomechanical and other physical properties. The investigations of the phase diagrams, crystal structures and microstructural features are essential for better understanding of the macro-properties. Phase diagrams and crystal structures have been studied mainly by X-ray diffraction (XRD). Transmission electron microscopy (TEM) has contributed to this field to a very limited extent; it has been used more extensively in the study of microstructure, phase transformations and lattice defects. Often only TEM can give solutions to numerous problems in the above fields, since the various phases exist in extremely fine grains and subgrain structures; single crystals of appreciable size are often not available. Examples with some of our experimental results from two multicomponent systems are presented here. The standard ion thinning technique was used for the preparation of thin foil samples, which were then investigated with JEOL 200A and Siemens ELMISKOP 102 (for the lattice resolution work) electron microscopes.

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Cetyltrimethylammonium bromide- and ethylene glycol-assisted preparation of mono-dispersed indium oxide nanoparticles using hydrothermal method

2014 ◽  
Vol 68 (8) ◽  
Author(s):  
Selvakumar Dhanasingh ◽  
Dharmaraj Nallasamy ◽  
Saravanan Padmanapan ◽  
Vinod Padaki
Keyword(s):  
Ethylene Glycol ◽  
Hydrothermal Method ◽  
Indium Oxide ◽  
Cetyltrimethylammonium Bromide ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
X Ray ◽  
Transmission Electron ◽  
Diffraction Patterns

AbstractThe influence of cetyltrimethylammonium bromide and ethylene glycol on the size and dispersion of indium oxide nanoparticles prepared under hydrothermal conditions was investigated. The precursor compound, indium hydroxide, obtained by the hydrothermal method in the absence as well as the presence of cetyltrimethylammonium bromide, was converted to indium oxide by sintering at 400°C. The formation of nanoscale indium oxide upon sintering was ascertained by the characteristic infrared adsorption bands and X-ray diffraction patterns of indium oxide. Transmission electron microscopy and band gap values confirmed that the cetyltrimethylammonium bromide facilitated the formation of indium oxide nanoparticles smaller in size and narrower in distribution than those prepared without the assistance of cetyltrimethylammonium bromide.

scholarly journals Characterization of ferrite nanoparticles for preparation of biocomposites

2017 ◽  
Vol 8 ◽  
pp. 1257-1265 ◽  
Author(s):  
Urszula Klekotka ◽  
Magdalena Rogowska ◽  
Dariusz Satuła ◽  
Beata Kalska-Szostko
Keyword(s):  
Chemical Method ◽  
Ferrite Nanoparticles ◽  
Chemical Activity ◽  
Nominal Composition ◽  
X Ray Diffraction ◽  
Wet Chemical Method ◽  
X Ray ◽  
Transmission Electron ◽  
Wet Chemical

Ferrite nanoparticles with nominal composition Me0.5Fe2.5O4 (Me = Co, Fe, Ni or Mn) have been successfully prepared by the wet chemical method. The obtained particles have a mean diameter of 11–16 ± 2 nm and were modified to improve their magnetic properties and chemical activity. The surface of the pristine nanoparticles was functionalized afterwards with –COOH and –NH2 groups to obtain a bioactive layer. To achieve our goal, two different modification approaches were realized. In the first one, glutaraldehyde was attached to the nanoparticles as a linker. In the second one, direct bonding of such nanoparticles with a bioparticle was studied. In subsequent steps, the nanoparticles were immobilized with enzymes such as albumin, glucose oxidase, lipase and trypsin as a test bioparticles. The characterization of the nanoparticles was acheived by transmission electron microscopy, X-ray diffraction, energy dispersive X-ray and Mössbauer spectroscopy. The effect of the obtained biocomposites was monitored by Fourier transform infrared spectroscopy. The obtained results show that in some cases the use of glutaraldehyde was crucial (albumin).

Synthesis and Study the Properties of a Solar Cell of Gold Nanoparticles Prepared in a Simple Chemical Way

2021 ◽  
Vol 19 (11) ◽  
pp. 66-71
Author(s):  
Maithm A. Obaid ◽  
Suha A Fadaam ◽  
Osama S. Hashim
Keyword(s):  
Electron Microscopy ◽  
Gold Nanoparticles ◽  
Chemical Method ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Casting Method ◽  
X Ray ◽  
Transmission Electron ◽  
Simple Chemical ◽  
Scanning Electron

The aim of this study is to prepare gold nanoparticles by a simple chemical method at a temperature of 70°C. The solution was dried on glass basest by Casting method, the rate of five drops per sample At a temperature 100 C. Then the structural and optical properties have been confirmed by X-ray diffraction, scanning electron microscopy (SEM) and Transmission Electron microscope (TEM), Fourier Transform Infrared Spectroscopy (FTIR) and spectrum.

scholarly journals Low-temperature hydrothermal synthesis of hierarchical flower-like CuB2O4 superstructures

2020 ◽  
Vol 14 (2) ◽  
pp. 113-118
Author(s):  
Daniel Ursu ◽  
Anamaria Dabici ◽  
Marinela Miclau ◽  
Nicolae Miclau
Keyword(s):  
Thermal Stability ◽  
Low Temperature ◽  
Self Assembly ◽  
Hydrothermal Solution ◽  
Optical Measurements ◽  
Oriented Attachment ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
One Step

We report for the first time the fabrication of hierarchical ordered superstructure CuB2O4 with flower-like morphology via a one-step, low temperature hydrothermal method. The tetragonal structure of CuB2O4 was determined by X-ray diffraction and high-resolution transmission electron microscopy. Optical measurements attested of the quality of the fabricated CuB2O4 and high temperature X-ray diffraction confirmed its thermal stability up to 600 ?C. The oriented attachment growth and the hierarchical self-assembly of micrometer-sized platelets producing hierarchical superstructures with flower-like morphology are designed by pH of the hydrothermal solution. The excellent band gap, high thermal stability and hierarchical structure of the CuB2O4 are promising for the photovoltaic and photocatalytic applications.

scholarly journals Impact of Nanosized CuO Insertion on Structural and Mechanical Properties of PVA: HPMC Based Polymer Blend Nanocomposites

2021 ◽  
Vol 33 (10) ◽  
pp. 2287-2292
Author(s):  
K. Vijayashree ◽  
K. Sheshappa Rai
Keyword(s):  
Mechanical Properties ◽  
Metal Oxide Nanoparticles ◽  
Hydroxypropyl Methylcellulose ◽  
Cuo Nanoparticles ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Visible ◽  
Blend Nanocomposites ◽  
Scanning Electron

Insertion of metal-oxide nanoparticles to polymers stipulate the modification of physical properties of polymers over and above the accomplishment of new features in the polymer matrix. In the current study, an attempt was made to disperse the CuO nanoparticles in the polyvinyl alcohol and hydroxypropyl methylcellulose (HPMC) blend to investigate the structural, mechanical and optical properties of the nanocomposite. Blend was prepared in different ratios using PVA and HPMC, viz. 25:50, 50:50 and 75:25 wt%. The CuO nanoparticles were added to the 75:25 PVA:HPMC blend in different percentage like 0.5,1 and 1.5%. The polymer with and without CuO incorporation were subjected to X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, UV-visible spectral analyses and mechanical strength, etc. The results revealed that the incorporation of the CuO nanoparticles enhanced the structural and mechanical properties of the polymer by forming successful nanocomposite.

Structural and Magnetic study of Al3+ doped Ni0.75Zn0.25Fe2-xAlxO4 nanoferrites

2013 ◽  
Vol 1506 ◽  
Author(s):  
L. Wang ◽  
B. K. Rai ◽  
S. R. Mishra
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Chemical Method ◽  
X Ray Diffraction ◽  
Wet Chemical Method ◽  
X Ray ◽  
Transmission Electron ◽  
Magnetic Dilution ◽  
Wet Chemical ◽  
Structural And Magnetic Properties

AbstractNanostructured Al3+ doped Ni0.75Zn0.25Fe2-xAlxO4 (x = 0.0,0.2,0.4,0.6,0.8, and 1.0) ferrites were synthesized via wet chemical method. X-ray diffraction, transmission electron microscopy, and magnetization measurements have been used to investigate the structural and magnetic properties of spinel ferrites calcined at 950 °C .With the doping of Al3+, the particle size of Ni0.75Zn0.25Fe2-xAlxO4 first increased to 47 nm at x = 0.4 and then decreased down to 37 nm at x = 1. Saturation magnetization decreased linearly with Al3+ due to magnetic dilution. The coercive field showed an inverse dependence on the particle size of ferrites.

Optical properties and energy transfer processes in Tb3+-doped ZnSe quantum dots

2021 ◽  
Author(s):  
Nguyen Ca ◽  
N. D Vinh ◽  
Phan Van Do ◽  
N. T. Hien ◽  
Xuan Hoa Vu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Quantum Dots ◽  
Chemical Method ◽  
X Ray Diffraction ◽  
Wet Chemical Method ◽  
X Ray ◽  
Transfer Processes ◽  
Transmission Electron ◽  
Wet Chemical

Tb3+-doped ZnSe quantum dots (QDs) with Tb content in the range of 0.5 - 7% were successfully synthesized by a wet chemical method. X-ray diffraction (XRD) and transmission electron microscopy...

Sign in / Sign up

Export Citation Format

Share Document