scholarly journals Removal of hexavalent chromium from wastewater by Cu/Fe bimetallic nanoparticles

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jien Ye ◽  
Yi Wang ◽  
Qiao Xu ◽  
Hanxin Wu ◽  
Jianhao Tong ◽  
...  
Keyword(s):  
Hexavalent Chromium ◽  
Removal Efficiency ◽  
Photoelectron Spectroscopy ◽  
Bimetallic Nanoparticles ◽  
Chemical Reduction ◽  
Particle Surface ◽  
Zerovalent Iron ◽  
Order Model ◽  
X Ray ◽  
Nanoscale Zerovalent Iron

AbstractPassivation of nanoscale zerovalent iron hinders its efficiency in water treatment, and loading another catalytic metal has been found to improve the efficiency significantly. In this study, Cu/Fe bimetallic nanoparticles were prepared by liquid-phase chemical reduction for removal of hexavalent chromium (Cr(VI)) from wastewater. Synthesized bimetallic nanoparticles were characterized by transmission electron microscopy, Brunauer–Emmet–Teller isotherm, and X-ray diffraction. The results showed that Cu loading can significantly enhance the removal efficiency of Cr(VI) by 29.3% to 84.0%, and the optimal Cu loading rate was 3% (wt%). The removal efficiency decreased with increasing initial pH and Cr(VI) concentration. The removal of Cr(VI) was better fitted by pseudo-second-order model than pseudo-first-order model. Thermodynamic analysis revealed that the Cr(VI) removal was spontaneous and endothermic, and the increase of reaction temperature facilitated the process. X-ray photoelectron spectroscopy (XPS) analysis indicated that Cr(VI) was completely reduced to Cr(III) and precipitated on the particle surface as hydroxylated Cr(OH)3 and CrxFe1−x(OH)3 coprecipitation. Our work could be beneficial for the application of iron-based nanomaterials in remediation of wastewater.

scholarly journals Removal of Hexavalent Chromium From Wastewater by Cu/Fe Bimetallic Nanoparticles

2020 ◽  
Author(s):  
Jien Ye ◽  
Yi Wang ◽  
Qiao Xu ◽  
Hanxin Wu ◽  
Jianhao Tong ◽  
...  
Keyword(s):  
Hexavalent Chromium ◽  
Removal Efficiency ◽  
Photoelectron Spectroscopy ◽  
Loading Rate ◽  
Bimetallic Nanoparticles ◽  
Particle Surface ◽  
Zerovalent Iron ◽  
Order Kinetic ◽  
Initial Concentration ◽  
First Order

Abstract BackgroundNanoscale zerovalent iron (nZVI) is a promising material for removing heavy metals from wastewater. However, passivation of nZVI hinders its efficiency in water treatment. Loading another catalytic metal has been found to improve the efficiency significantly. In this study, Cu/Fe bimetallic nanoparticles were prepared by liquid-phase chemical reduction for removal of hexavalent chromium (Cr(VI)) from wastewater. Purpose of this study was to clarify the effects and mechanisms of Cu loading on the removal efficiency of Cr(VI).ResultsThe results showed that Cu loading can significantly enhance the removal efficiency of Cr(VI) by 29.3% to 84.0%, and the optimal Cu loading rate was 3% (wt%). The removal efficiency decreased with increasing initial pH and Cr(VI) concentration. It was found that Cr(VI) removal followed a pseudo-first-order kinetic model. When the Cu loading rate was 3%, the initial concentration of Cr(VI) was 100 mg/L, the observed first-order rate coefficient (kobs) was 0.016 min-1 for Cu/Fe bimetallic nanoparticles at pH of 3.5, which was twice than that of nZVI (0.008 min-1). X-ray photoelectron spectroscopy (XPS) analysis indicated that Cr(VI) was completely reduced to Cr(Ⅲ) and precipitated on the particle surface as hydroxylated Cr(OH)3 and CrxFe1-x(OH)3 coprecipitation.ConclusionsIn this study, it was found that the loading of Cu can significantly increase the specific surface area and the Cr(VI) remove efficiency of nZVI, and the removal efficiency decreases with increasing pH and Cr(VI) initial concentration. Therefore, Cu loading can alleviate the passivation of nZVI effectively and can be beneficial for the application of iron-based nanomaterials in remediation of wastewater.

scholarly journals Synthesis of Nanoscale Zerovalent Iron (nZVI) Supported on Biochar for Chromium Remediation from Aqueous Solution and Soil

2019 ◽  
Vol 16 (22) ◽  
pp. 4430 ◽  
Author(s):  
Haixia Wang ◽  
Mingliang Zhang ◽  
Hongyi Li
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Zero Valent Iron ◽  
Zerovalent Iron ◽  
X Ray ◽  
Nanoscale Zerovalent Iron ◽  
Before And After ◽  
Pseudo Second Order ◽  
Xrd Patterns ◽  
Co Precipitation

Maize straw biochar-supported nanoscale zero-valent iron composite (MSB-nZVI) was prepared for efficient chromium (Cr) removal through alleviating the aggregation of zero-valent iron particles. The removal mechanism of MSB-nZVI was investigated by scanning electron microscopy with energy dispersive X-ray (SEM-EDX), X-ray diffractometry (XRD), and X-ray photoelectron spectroscopy (XPS). Cr(VI) removal from aqueous solution by MSB-nZVI was greatly affected by pH and initial concentration. The removal efficiency of Cr(VI) decreased with increasing pH, and the removal kinetics followed the pseudo-second-order model. XRD patterns of MSB-nZVI before and after reaction showed that reduction and precipitation/co-precipitation (FeCr2O4, Fe3O4, Fe2O3) occurred with the conversion of Cr(VI) to Cr(III) and Fe(0) to Fe(II)/Fe(III). The produced precipitation/co-precipitation could be deposited on the MSB surface rather than being only coated on the surface of nZVI particles, which can alleviate passivation of nZVI. For remediation of Cr(VI)-contaminated saline–alkali soil (pH 8.6–9.0, Cr 341 mg/kg), the released amount of Cr(VI) was 70.7 mg/kg, while it sharply decreased to 0.6–1.7 mg/kg at pH 4.0–8.0, indicating that the saline–alkali environment inhibited the remediation efficiency. These results show that MSB-nZVI can be used as an effective material for Cr(VI) removal from aqueous solution and contaminated soil.

Reduction of highly concentrated phosphate from aqueous solution using pectin-nanoscale zerovalent iron (PNZVI)

2016 ◽  
Vol 73 (11) ◽  
pp. 2689-2696 ◽  
Author(s):  
Hongyu Wang ◽  
Zhuocheng Zou ◽  
Xuelian Xiao ◽  
Dan Chen ◽  
Kai Yang
Keyword(s):  
Aqueous Solution ◽  
Removal Efficiency ◽  
Photoelectron Spectroscopy ◽  
Phosphate Removal ◽  
Zerovalent Iron ◽  
Phosphate Adsorption ◽  
Maximum Adsorption Capacity ◽  
Surface Areas ◽  
Nanoscale Zerovalent Iron ◽  
The Fourier Transform

Pectin-nanoscale zerovalent iron (PNZVI) has been studied as an effective phosphate adsorption material to remove highly concentrated phosphate from aqueous solution. Batch phosphate removal and equilibrium experiments were conducted in order to evaluate the effects of environmental factors such as pH, coexisting anions and ionic strengths on phosphate removal by PNZVI. The scanning electron microscope images of nanoscale zerovalent iron (NZVI) and PNZVI demonstrated that PNZVI exhibited larger specific surface areas than NZVI so that PNZVI had higher phosphate removal efficiency than NZVI. Equilibrium experiments showed that phosphate adsorption by PNZVI was well fitted with the Freundlich and Langmuir models. In addition, the maximum adsorption capacity reached 277.38 mgP/gPNZVI. The ionic strengths and common anions showed no significant effects on the process of phosphate adsorption by PNZVI. The phosphate removal efficiency increased to a peak value with pH increased from 2.0 to 5.0, then decreased with pH further increased from 5.0 to 10.0. The Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses of PNZVI and P-loaded PNZVI indicated that adsorption, rather than redox reaction, was the dominant mechanism for the removal of phosphate by PNZVI.

Designing of a nanoscale zerovalent iron@fly ash composite as efficient and sustainable adsorbents for hexavalent chromium (Cr(VI)) from water

2021 ◽  
Author(s):  
Shubhangi Madan ◽  
Urvashi Thapa ◽  
Sangeeta Tiwari ◽  
Sandeep Kumar Tiwari ◽  
Suresh Kumar Jakka ◽  
...  
Keyword(s):  
Fly Ash ◽  
Hexavalent Chromium ◽  
Zerovalent Iron ◽  
Nanoscale Zerovalent Iron

Amorphous Ni-Co-B Catalyst for Hydrolysis of NaBH4 in Alkaline Solution

2011 ◽  
Vol 675-677 ◽  
pp. 33-36
Author(s):  
Chuan Wu ◽  
Ying Bai ◽  
Feng Wu ◽  
Dan Xian Liu
Keyword(s):  
Alkaline Solution ◽  
Photoelectron Spectroscopy ◽  
Proton Exchange Membrane ◽  
Hydrogen Generation ◽  
Chemical Reduction ◽  
Heat Treating ◽  
Proton Exchange ◽  
X Ray ◽  
Bet Analysis ◽  
Exchange Membrane

Amorphous Ni-Co-B catalyst was synthesized by a chemical reduction method, and followed by a heat-treating at 100°C, then characterized by X-ray diffraction (XRD), Scanning electronic microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmetr-Teller (BET) analysis, and adopted to help accelerating hydrolysis reaction of NaBH4 alkaline solution. It is proved that the amorphous Ni-Co-B catalyst is not a simple combination of elemental Ni, Co and B, but a multiplex metal boride. It exhibits an maximum hydrogen generation rate of 210 ml/min/(g catalyst) at 100% H2 utilization, which is potentially to give a successive H2 supply for proton exchange membrane fuel cells.

scholarly journals Enhanced removal of hexavalent chromium by different acid-modified biochar derived from corn straw: behavior and mechanism

2020 ◽  
Vol 81 (10) ◽  
pp. 2270-2280
Author(s):  
Yonggang Xu ◽  
Tianxia Bai ◽  
Yubo Yan ◽  
Yunfeng Zhao ◽  
Ling Yuan ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Hydrogen Ion ◽  
Corn Straw ◽  
Order Model ◽  
Freundlich Model ◽  
X Ray ◽  
Modified Biochar ◽  
Before And After ◽  
Pseudo Second Order ◽  
Kinetics Of

Abstract It is of great significance to remove Cr(VI) from water as a result of its high toxicity. Biochar from corn straw was modified by different acids (HNO3, H2SO4 and H3PO4) to remove Cr(VI) from aqueous solution. To estimate the removal mechanisms of Cr(VI) by the acid-modified biochars, batch experiments were performed in the light of contact time, Cr(VI) concentration, and pH, and the characteristics of acid-modified biochars before and after Cr(VI) adsorption were investigated by Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectroscopy (XPS). The adsorption kinetics of Cr(VI) by acid-modified biochars were consistent with the pseudo-second-order model, and the adsorption isotherm obeyed the Freundlich model. Furthermore, the acid- modified biochars could supply more oxygen-containing functional groups (-COOH and -OH) as electron donor (e−) and hydrogen ion (H+) to enhance the reduction of Cr(VI) to Cr(III), resulting in enhanced removal of Cr(VI). HNO3-modified biochar exhibited the highest removal efficiency of Cr(VI). In general, the acid modifition of biochar was an effective method to increase the removal of Cr(VI).

Sign in / Sign up

Export Citation Format

Share Document