Platelet Aggregation Induced In Vivo By Heparin And Heparin Fractions
As we have reported, heparin-induced platelet aggregation in vitro varies among heparin subfractions, being generally less with lower molecular weights and having a reciprocal relationship with antithrombin affinity.We now have studied heparin-induced platelet aggregates in vivo by the technique of Wu and Hoak using arterial blood from unanesthetized rabbits. Porcine mucosal heparin was fractionated by gel filtration into high molecular weight (ave. 15,000 Daltons) or low molecular weight (ave. 6,000 Daltons) preparations. IV administration of commercial porcine mucosal heparin (spec. act. 150 u/mg) or high (spec. act. 183 u/mg) or low (spec. act. 208 u/mg) molecular weight fractions was followed by an increase in the platelet aggregate ratio compared with preinjection control values. The rise in platelet aggregate ratio with heparin was significantly different from the effect of a saline placebo (n=8) but was not significantly different among rabbits receiving the commercial heparin (n=9) or the high (n=8) or low (n=8) molecular weight preparations. Peak rise in circulating aggregate ratio occurred 2 minutes after the injection, and values returned to control levels within 15 to 30 minutes. There was no change in platelet count in blood collected in EDTA, suggesting that the aggregates were not removed from the circulation in vivo.Heparin fractions of low molecular weight were further separated according to antithrombin affinity by an antithrombin binding technique. In 8 rabbits low molecular weight/high antithrombin affinity heparin (spec. act. 480 u/mg) did not cause formation of platelet aggregates. The results were significantly different from those with commercial heparin (p=0.05) or with the other heparin fractions (p=0.06).Clinical use of low molecular weight heparin of high antithrombin affinity may lead to fewer heparin-induced platelet effects and to an improvement in anticoagulant therapy.