Minimax rate in prediction for functional principal component regression

2019 ◽  
pp. 1-10
Author(s):  
Guangren Yang ◽  
Hongmei Lin ◽  
Heng Lian
Keyword(s):  
Principal Component Regression ◽  
Principal Component ◽  
Functional Principal Component ◽  
Minimax Rate

scholarly journals Comparison of Functional Regression and Functional Principal Component Regression for Estimating Non-Invasive Blood Glucose Level

2021 ◽  
Vol 5 (1) ◽  
pp. 14-25
Author(s):  
Nurul Fadhilah ◽  
Erfiani Erfiani ◽  
Indahwati Indahwati
Keyword(s):  
Blood Glucose ◽  
Blood Glucose Level ◽  
Glucose Level ◽  
Principal Component Regression ◽  
Principal Component ◽  
Functional Regression ◽  
Glucose Levels ◽  
Non Invasive ◽  
Blood Glucose Levels ◽  
Functional Principal Component

The calibration method is an alternative method that can be used to analyze the relationship between invasive and non-invasive blood glucose levels. Calibration modeling generally has a large dimension and contains multicolinearities because usually in functional data the number of independent variables (p) is greater than the number of observations (p>n). Both problems can be overcome using Functional Regression (FR) and Functional Principal Component Regression (FPCR). FPCR is based on Principal Component Analysis (PCA). In FPCR, the data is transformed using a polynomial basis before data reduction. This research tried to model the equations of spectral calibration of voltage value excreted by non-invasive blood glucose level monitoring devices to predict blood glucose using FR and FPCR. This study aimed to determine the best calibration model for measuring non-invasive blood glucose levels with the FR and FPCR. The results of this research showed that the FR model had a bigger coefficient determination (R2) value and lower Root Mean Square Error (RMSE) and Root Mean Square Error Prediction (RMSEP) value than the FPCR model, which was 12.9%, 5.417, and 5.727 respectively. Overall, the calibration modeling with the FR model is the best model for estimate blood glucose level compared to the FPCR model.

scholarly journals Elastic functional principal component regression

2018 ◽  
Vol 12 (2) ◽  
pp. 101-115 ◽  
Author(s):  
J. Derek Tucker ◽  
John R. Lewis ◽  
Anuj Srivastava
Keyword(s):  
Principal Component Regression ◽  
Principal Component ◽  
Functional Principal Component

Pemanfaatan CFSRv2 untuk Statistical Downscaling menggunakan Principal Component Regression dan Partial Least Square

2019 ◽  
Vol 8 (1) ◽  
Author(s):  
Khairunnisa Khairunnisa ◽  
Rizka Pitri ◽  
Victor P Butar-Butar ◽  
Agus M Soleh
Keyword(s):  
Statistical Downscaling ◽  
General Circulation ◽  
Principal Component Regression ◽  
Circulation Model ◽  
Principal Component ◽  
Meteorological Station ◽  
Grid Size ◽  
Partial Least Square ◽  
Least Square ◽  
Output Data

This research used CFSRv2 data as output data general circulation model. CFSRv2 involves some variables data with high correlation, so in this research is using principal component regression (PCR) and partial least square (PLS) to solve the multicollinearity occurring in CFSRv2 data. This research aims to determine the best model between PCR and PLS to estimate rainfall at Bandung geophysical station, Bogor climatology station, Citeko meteorological station, and Jatiwangi meteorological station by comparing RMSEP value and correlation value. Size used was 3×3, 4×4, 5×5, 6×6, 7×7, 8×8, 9×9, and 11×11 that was located between (-40) N - (-90) S and 1050 E -1100 E with a grid size of 0.5×0.5 The PLS model was the best model used in stastistical downscaling in this research than PCR model because of the PLS model obtained the lower RMSEP value and the higher correlation value. The best domain and RMSEP value for Bandung geophysical station, Bogor climatology station, Citeko meteorological station, and Jatiwangi meteorological station is 9 × 9 with 100.06, 6 × 6 with 194.3, 8 × 8 with 117.6, and 6 × 6 with 108.2, respectively.

scholarly journals Application of Derivative, Derivative Ratio, and Multivariate Spectral Analysis and Thin-Layer Chomatography-Densitometry for Determination of a Ternary Mixture Containing Drotaverine Hydrochloride, Caffeine, and Paracetamol

2007 ◽  
Vol 90 (2) ◽  
pp. 391-404 ◽  
Author(s):  
Fadia H Metwally ◽  
Yasser S El-Saharty ◽  
Mohamed Refaat ◽  
Sonia Z El-Khateeb
Keyword(s):  
Thin Layer ◽  
Least Squares ◽  
Ternary Mixture ◽  
Principal Component Regression ◽  
Pharmaceutical Preparations ◽  
Principal Component ◽  
Standard Addition ◽  
Drotaverine Hydrochloride ◽  
Assay Precision

Abstract New selective, precise, and accurate methods are described for the determination of a ternary mixture containing drotaverine hydrochloride (I), caffeine (II), and paracetamol (III). The first method uses the first (D1) and third (D3) derivative spectrophotometry at 331 and 315 nm for the determination of (I) and (III), respectively, without interference from (II). The second method depends on the simultaneous use of the first derivative of the ratio spectra (DD1) with measurement at 312.4 nm for determination of (I) using the spectrum of 40 μg/mL (III) as a divisor or measurement at 286.4 and 304 nm after using the spectrum of 4 μg/mL (I) as a divisor for the determination of (II) and (III), respectively. In the third method, the predictive abilities of the classical least-squares, principal component regression, and partial least-squares were examined for the simultaneous determination of the ternary mixture. The last method depends on thin-layer chromatography-densitometry after separation of the mixture on silica gel plates using ethyl acetatechloroformmethanol (16 + 3 + 1, v/v/v) as the mobile phase. The spots were scanned at 281, 272, and 248 nm for the determination of (I), (II), and (III), respectively. Regression analysis showed good correlation in the selected ranges with excellent percentage recoveries. The chemical variables affecting the analytical performance of the methodology were studied and optimized. The methods showed no significant interferences from excipients. Intraday and interday assay precision and accuracy values were within regulatory limits. The suggested procedures were checked using laboratory-prepared mixtures and were successfully applied for the analysis of their pharmaceutical preparations. The validity of the proposed methods was further assessed by applying a standard addition technique. The results obtained by applying the proposed methods were statistically analyzed and compared with those obtained by the manufacturer's method.

scholarly journals Principal component regression in GAMLSS applied to Greek–German government bond yield spreads

2021 ◽  
pp. 1471082X2110229
Author(s):  
D. Stasinopoulos Mikis ◽  
A. Rigby Robert ◽  
Georgikopoulos Nikolaos ◽  
De Bastiani Fernanda
Keyword(s):  
Additive Model ◽  
Principal Component Regression ◽  
Principal Component ◽  
Complex Nature ◽  
Government Bond ◽  
German Government ◽  
Yield Spreads ◽  
Explanatory Variables ◽  
Interaction Terms ◽  
Bond Yield

A solution to the problem of having to deal with a large number of interrelated explanatory variables within a generalized additive model for location, scale and shape (GAMLSS) is given here using as an example the Greek–German government bond yield spreads from 25 April 2005 to 31 March 2010. Those were turbulent financial years, and in order to capture the spreads behaviour, a model has to be able to deal with the complex nature of the financial indicators used to predict the spreads. Fitting a model, using principal components regression of both main and first order interaction terms, for all the parameters of the assumed distribution of the response variable seems to produce promising results.

scholarly journals Full spectrum and genetic algorithm-selected spectrum-based chemometric methods for simultaneous determination of azilsartan medoxomil, chlorthalidone, and azilsartan: Development, validation, and application on commercial dosage form

2021 ◽  
Vol 19 (1) ◽  
pp. 205-213
Author(s):  
Hany W. Darwish ◽  
Abdulrahman A. Al Majed ◽  
Ibrahim A. Al-Suwaidan ◽  
Ibrahim A. Darwish ◽  
Ahmed H. Bakheit ◽  
...  
Keyword(s):  
Genetic Algorithm ◽  
Simultaneous Determination ◽  
Predictive Power ◽  
Principal Component Regression ◽  
Selection Procedure ◽  
Principal Component ◽  
Chemometric Methods ◽  
Full Spectrum ◽  
Azilsartan Medoxomil

Abstract Five various chemometric methods were established for the simultaneous determination of azilsartan medoxomil (AZM) and chlorthalidone in the presence of azilsartan which is the core impurity of AZM. The full spectrum-based chemometric techniques, namely partial least squares (PLS), principal component regression, and artificial neural networks (ANN), were among the applied methods. Besides, the ANN and PLS were the other two methods that were extended by genetic algorithm procedure (GA-PLS and GA-ANN) as a wavelength selection procedure. The models were developed by applying a multilevel multifactor experimental design. The predictive power of the suggested models was evaluated through a validation set containing nine mixtures with different ratios of the three analytes. For the analysis of Edarbyclor® tablets, all the proposed procedures were applied and the best results were achieved in the case of ANN, GA-ANN, and GA-PLS methods. The findings of the three methods were revealed as the quantitative tool for the analysis of the three components without any intrusion from the co-formulated excipient and without prior separation procedures. Moreover, the GA impact on strengthening the predictive power of ANN- and PLS-based models was also highlighted.

Sign in / Sign up

Export Citation Format

Share Document