scholarly journals Use of Tuned Liquid Damper to Control Structural Vibration Structural.

2021 ◽  
Vol 1197 (1) ◽  
pp. 012053
Author(s):  
Rechal L. Chawhan ◽  
Nikhil H. Pitale ◽  
S.S. Solanke ◽  
Mangesh Saiwala
Keyword(s):  
Structural Response ◽  
Tuned Mass Damper ◽  
Harmonic Excitation ◽  
Structural Vibration ◽  
Water Tank ◽  
Tuned Liquid Damper ◽  
High Rise ◽  
Mass Damper ◽  
Sloshing Phenomenon ◽  
Liquid Dampers

Abstract The aim of this paper is to study the tuned liquid damper and it’s effectivness. The tunned liquid dampers are simply tuned mass damper where the liquid (usually water) replaces the mass.Tuned liquid dampers is a water tank placed over the structure which is able to reduce the dynamic structural response subjected to stimulation through sloshing effect. The effectiveness of tuned liquid damper depends upon various parameters. Tuned liquid damper are suitable for high rise building rather than short building. The tuned liquid damper decreases effect of harmonic excitation by Dissipating the energy of excitation through sloshing phenomenon.

Optimal Vibration Suppression of Timoshenko Beam With Tuned-Mass-Damper Using Finite Element Method

2009 ◽  
Vol 131 (3) ◽  
Author(s):  
Fan Yang ◽  
Ramin Sedaghati ◽  
Ebrahim Esmailzadeh
Keyword(s):  
Finite Element ◽  
Timoshenko Beam ◽  
Vibration Suppression ◽  
Structural Response ◽  
Tuned Mass Damper ◽  
Structural Vibration ◽  
Design Parameters ◽  
Element Formulation ◽  
Analysis And Design ◽  
Mass Damper

In this study, the structural vibration analysis and design of a Timoshenko beam with the attached tuned-mass-damper (TMD) under the harmonic and random excitations are presented using the finite element technique. A design optimization methodology has been developed in which the derived finite element formulation of a Timoshenko beam with the attached TMD has been combined with the sequential quadratic programming optimization algorithm to find the optimal design variables of TMD in order to suppress the vibration effectively. The validity of the developed optimal TMD system design strategy has been verified through illustrative examples, in which the structural response comparisons and the sensitivity analysis of the design parameters have been presented. The results were compared with those available in literatures and very close agreement was achieved.

A novel tuned mass-conical spring system for passive vibration control of a variable mass structure

2021 ◽  
pp. 107754632110004
Author(s):  
Sanjukta Chakraborty ◽  
Aparna (Dey) Ghosh ◽  
Samit Ray-Chaudhuri
Keyword(s):  
Variable Mass ◽  
Design Procedure ◽  
Time History ◽  
Tuned Mass Damper ◽  
Water Tank ◽  
Mass System ◽  
Mass Damper ◽  
Linear Spring ◽  
Spring System ◽  
Elevated Water

This article presents the design of a tuned mass damper with a conical spring to enable tuning to the natural frequency of the system at multiple values, as may be convenient in case of a system with fluctuations in the mass. The principle and design procedure of the conical spring in the context of a varying mass system are presented. A passive feedback control mechanism based on a simple pulley-mass system is devised to cater to the multi-tuning requirements. A design example of an elevated water tank with fluctuating water content, subjected to ground excitation, is considered to numerically illustrate the efficiency of such a tuned mass damper associated with the conical spring. The conical spring is designed based on the tuning requirements at different mass conditions of the elevated water tank by satisfying the allowable load bearing capacity of the spring. Comparisons are made with the conventional passive tuned mass damper with a linear spring tuned to the full tank condition. Results from time history analysis reveal that the conical spring-tuned mass damper can be successfully designed to remain tuned and thereby achieve significant response reductions under stiffening conditions of the primary structure, whereas the linear spring-tuned mass damper suffers performance degradation because of detuning, whenever there is any fluctuation in the system mass.

scholarly journals Vibration suppression of structures using tuned mass damper technology: A state-of-the-art review

2021 ◽  
pp. 107754632098430
Author(s):  
Fan Yang ◽  
Ramin Sedaghati ◽  
Ebrahim Esmailzadeh
Keyword(s):  
Mathematical Modeling ◽  
Vibration Suppression ◽  
State Of The Art ◽  
Optimization Procedure ◽  
Tuned Mass Damper ◽  
Structural Vibration ◽  
Practical Realization ◽  
Reliable Operation ◽  
Mass Damper ◽  
Structural Vibration Suppression

To date, considerable attention has been paid to the development of structural vibration suppression techniques. Among all vibration suppression devices and techniques, the tuned mass damper is one of the most promising technologies due to its mechanical simplicity, cost-effectiveness, and reliable operation. In this article, a critical review of the structural vibration suppression using tuned mass damper technology will be presented mainly focused on the following four categories: (1) tuned mass damper technology and its modifications, (2) tuned mass damper technology in discrete and continuous structures (mathematical modeling), (3) optimization procedure to obtain the optimally designed tuned mass damper system, and (4) active tuned mass damper and semi-active tuned mass damper with the practical realization of the tuned mass damper technologies.

scholarly journals Effect of Frequency Characteristics of Ground Motion on Response of Tuned Mass Damper Controlled Inelastic Concrete Frame

Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 74
Author(s):  
Md Motiur Rahman ◽  
Tahmina Tasnim Nahar ◽  
Dookie Kim
Keyword(s):  
Ground Motion ◽  
Structural Response ◽  
Tuned Mass Damper ◽  
Frequency Characteristics ◽  
Building Frames ◽  
Concrete Frame ◽  
Finite Element Software ◽  
Mass Damper ◽  
Lateral Displacements ◽  
Modal Mass

This paper investigates the performance of tuned mass damper (TMD) and dynamic behavior of TMD-controlled concrete structure considering the ground motion (GM) characteristics based on frequency content. The effectiveness of TMD in reducing the structural response and probability of collapse of the building frames are affected by the frequency characteristics of GMs. To attenuate the seismic vibration of the buildings, the TMD controlled building has been designed based on the modal analysis (modal frequencies and modal mass participation ratio). In this study, to investigate the performance of TMD, four different heights (i.e., 3, 5, 10, 20 stories) inelastic concrete moment-resisting frames equipped with TMDs are developed using an open-source finite element software. A series of numerical analyses have been conducted using sixty earthquakes classified into three categories corresponding to low, medium, and high-frequency characteristics of GMs. To evaluate the proposed strategy, peak lateral displacements, inter-story drift, and the probability of collapse using fragility analysis have been investigated through the structures equipped with and without TMD. The results appraise the effect of TMD and compare the seismic responses of earthquake frequency contents and the vibration control system of the inelastic building frames.

A numerical study of hybrid tuned mass damper and tuned liquid damper system on structure motion control

2021 ◽  
Vol 242 ◽  
pp. 110129
Author(s):  
Meng-Chang Hsieh ◽  
Guan-Lee Huang ◽  
Haijun Liu ◽  
Shih-Jiun Chen ◽  
Bang-Fuh Chen
Keyword(s):  
Motion Control ◽  
Numerical Study ◽  
Tuned Mass Damper ◽  
Tuned Liquid Damper ◽  
Mass Damper

The Two-Degree-of-Freedom Tuned-Mass Damper for Suppression of Single-Mode Vibration Under Random and Harmonic Excitation

2005 ◽  
Vol 128 (1) ◽  
pp. 56-65 ◽  
Author(s):  
Lei Zuo ◽  
Samir A. Nayfeh
Keyword(s):  
Vibration Suppression ◽  
Single Mode ◽  
Tuned Mass Damper ◽  
Harmonic Excitation ◽  
Degree Of Freedom ◽  
Primary System ◽  
H Infinity ◽  
Mass Damper ◽  
Mode Vibration ◽  
Two Degree Of Freedom

Whenever a tuned-mass damper is attached to a primary system, motion of the absorber body in more than one degree of freedom (DOF) relative to the primary system can be used to attenuate vibration of the primary system. In this paper, we propose that more than one mode of vibration of an absorber body relative to a primary system be tuned to suppress single-mode vibration of a primary system. We cast the problem of optimization of the multi-degree-of-freedom connection between the absorber body and primary structure as a decentralized control problem and develop optimization algorithms based on the H2 and H-infinity norms to minimize the response to random and harmonic excitations, respectively. We find that a two-DOF absorber can attain better performance than the optimal SDOF absorber, even for the case where the rotary inertia of the absorber tends to zero. With properly chosen connection locations, the two-DOF absorber achieves better vibration suppression than two separate absorbers of optimized mass distribution. A two-DOF absorber with a negative damper in one of its two connections to the primary system yields significantly better performance than absorbers with only positive dampers.

scholarly journals Impact Multi-Tuned Mass Damper for High-Rise Buildings against Destructive Earthquake Input. 2nd Report. Investigation of Performance of the System by Shake Table Tests.

1996 ◽  
Vol 62 (597) ◽  
pp. 1719-1725 ◽  
Author(s):  
Satoshi FUJITA ◽  
Takashi KAWAI ◽  
Ikuo SHIMODA ◽  
Masami MOCHIMARU ◽  
Kiyoshi NAGAI ◽  
...  
Keyword(s):  
Tuned Mass Damper ◽  
Shake Table ◽  
Shake Table Tests ◽  
High Rise ◽  
Mass Damper

Back-iron design-based electromagnetic regenerative tuned mass damper

2020 ◽  
Vol 234 (3) ◽  
pp. 607-622
Author(s):  
Semen Kopylov ◽  
Zhaobo Chen ◽  
Mohamed AA Abdelkareem
Keyword(s):  
Root Mean Square ◽  
Tuned Mass Damper ◽  
Harmonic Excitation ◽  
Experimental Results ◽  
Mean Square ◽  
Tuned Mass Dampers ◽  
Practical Applications ◽  
Mass Damper ◽  
Compact Dimension ◽  
Regenerative Power

Implementation of tuned mass dampers is the commonly used approach to avoid excessive vibrations in civil engineering. However, due to the absence of the compact dimension, there are still no practical applications of the tuned mass dampers in automotive industry. Meanwhile, recent investigations showed the benefit of utilizing a tuned mass damper in a vehicle suspension in terms of driving comfort and road holding. Thus, the current investigation aimed to explore a novel compact dimension tuned mass damper, which can provide both sufficient vibration mitigation and energy harvesting. This paper presents a prototype of a back-iron-based design of an electromagnetic regenerative tuned mass damper. The mathematical model of the tuned mass damper system was developed and has been validated by the experimental results of the tuned mass damper prototype implemented in a protected mass test-bench. The indicated results concluded that the attenuation performance dramatically deteriorated under random excitations and a reduction in the root-mean-square acceleration of 18% is concluded compared to the case with undamped tuned mass damper. Under harmonic excitations, the designed tuned mass damper prototype is able to reduce the peak acceleration value of the protected structure by 79%. According to the experimental results, the designed tuned mass damper prototype revealed a peak regenerative power of 0.76 W under a harmonic excitation of 8.1 Hz frequency [Formula: see text]m amplitude. Given the simulated random road profiles from C to E, the back-iron electromagnetic tuned mass damper indicated that root-mean-square harvested power from 0.6 to 6.4 W, respectively.

scholarly journals Development of a Frequency-Adjustable Tuned Mass Damper (FATMD) for Structural Vibration Control

2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Huaguo Gao ◽  
Congbao Wang ◽  
Chen Huang ◽  
Wenlong Shi ◽  
Linsheng Huo
Keyword(s):  
Damping Ratio ◽  
Tuned Mass Damper ◽  
Vertical Vibration ◽  
Structural Vibration ◽  
Kinematic Equation ◽  
Pedestrian Bridge ◽  
Long Span ◽  
Mass Damper ◽  
Excitation Frequencies ◽  
Simple Assembly

The tuned mass damper (TMD) can be applied to suppress earthquake, wind, and pedestrian- and machine-induced vibration in factory buildings or large span structures. However, the traditional TMD with a fixed frequency will not be able to perform effectively against the frequency variations in multiple hazards. This paper proposed a frequency-adjustable tuned mass damper (FATMD) to solve this limitation of current TMD. The FATMD presented in this paper is composed of a simple assembly consisting of a supported beam with a mass, in which the frequency of the FATMD is changed by adjusting the span of the beam. The kinematic equation of a single degree of freedom (SDOF) structure installed with an FATMD is established to analyze the effect of the damping ratio, mass ratio, and stiffness on the vibration damping. The fundamental frequency of the FATMD at different spans is verified by simulation and experiments. Forced vibration experiments with different excitation frequencies are also conducted to verify the performance of the FATMD. The results show that the proposed FATMD can effectively suppress the vertical vibration of structures at different excitation frequencies, including frequencies at a range higher than what a traditional TMD may not be able to suppress. Additionally, the proposed FATMD is applied to a long-span pedestrian bridge which vibrates frequently due to the walking of pedestrians, the running of escalators, and earthquakes. The numerical results indicate that the FATMD can effectively reduce the vertical vibration of the pedestrian bridge under the excitations of pedestrians, escalators, and earthquakes.

Sign in / Sign up

Export Citation Format

Share Document