scholarly journals Biofabrication using maize protein: 3D printing using zein formulations

2020 ◽  
Author(s):  
Jorge Alfonso Tavares-Negrete ◽  
Alberto Emanuel Aceves-Colin ◽  
Delia Cristal Rivera-Flores ◽  
Gladys Guadalupe Díaz-Armas ◽  
Anne-Sophie Mertgen ◽  
...  
Keyword(s):  
3D Printing ◽  
Apparent Viscosity ◽  
Biomedical Applications ◽  
Three Dimensional ◽  
Controlled Drug Release ◽  
Free Standing ◽  
Maize Seeds ◽  
Maize Protein ◽  
Protein Matrices ◽  
Printing Parameters

AbstractThe use of three-dimensional (3D) printing for biomedical applications has expanded exponentially in recent years. However, the current portfolio of 3D printable inks is still limited. For instance, only a few protein matrices have been explored as printing/bioprinting materials. Here, we introduce the use of zein, the primary constitutive protein in maize seeds, as a 3D-printable material. Zein-based inks were prepared by dissolving commercial zein powder in ethanol with or without polyethylene glycol (PEG400) as a plasticizer. The rheological characteristics of our materials, studied during 21 days of aging/maturation, showed an increase in the apparent viscosity as a function of time in all formulations. The addition of PEG 400 decreased the apparent viscosity. Inks with and without PEG400 and at different maturation times were tested for printability in a BioX bioprinter. We optimized the 3D printing parameters for each ink formulation in terms of extrusion pressure and linear printing velocity. Higher fidelity structures were obtained with inks that had maturation times of 10 to 14 days. We present different proof-of-concept experiments to demonstrate the versatility of the engineered zein inks for diverse biomedical applications. These include printing of complex and/or free-standing 3D structures, materials for controlled drug release, and scaffolds for cell culture.

scholarly journals Comparative Study of Silk Fibroin-Based Hydrogels and Their Potential as Material for 3-Dimensional (3D) Printing

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3887
Author(s):  
Watcharapong Pudkon ◽  
Chavee Laomeephol ◽  
Siriporn Damrongsakkul ◽  
Sorada Kanokpanont ◽  
Juthamas Ratanavaraporn
Keyword(s):  
3D Printing ◽  
Silk Fibroin ◽  
Biomedical Applications ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
Structure Stability ◽  
3 Dimensional ◽  
Critical Technology ◽  
Box Structure ◽  
High Degree

Three-dimensional (3D) printing is regarded as a critical technology in material engineering for biomedical applications. From a previous report, silk fibroin (SF) has been used as a biomaterial for tissue engineering due to its biocompatibility, biodegradability, non-toxicity and robust mechanical properties which provide a potential as material for 3D-printing. In this study, SF-based hydrogels with different formulations and SF concentrations (1–3%wt) were prepared by natural gelation (SF/self-gelled), sodium tetradecyl sulfate-induced (SF/STS) and dimyristoyl glycerophosphorylglycerol-induced (SF/DMPG). From the results, 2%wt SF-based (2SF) hydrogels showed suitable properties for extrusion, such as storage modulus, shear-thinning behavior and degree of structure recovery. The 4-layer box structure of all 2SF-based hydrogel formulations could be printed without structural collapse. In addition, the mechanical stability of printed structures after three-step post-treatment was investigated. The printed structure of 2SF/STS and 2SF/DMPG hydrogels exhibited high stability with high degree of structure recovery as 70.4% and 53.7%, respectively, compared to 2SF/self-gelled construct as 38.9%. The 2SF/STS and 2SF/DMPG hydrogels showed a great potential to use as material for 3D-printing due to its rheological properties, printability and structure stability.

Three-Dimensional Printing Using a Maize Protein: Zein-Based Inks in Biomedical Applications

2021 ◽  
Author(s):  
Jorge Alfonso Tavares-Negrete ◽  
Alberto Emanuel Aceves-Colin ◽  
Delia Cristal Rivera-Flores ◽  
Gladys Guadalupe Díaz-Armas ◽  
Anne-Sophie Mertgen ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Three Dimensional ◽  
Three Dimensional Printing ◽  
Maize Protein ◽  
Dimensional Printing

3 D printing technology and experimental study of chitosan gel using atomized solidification liquid-assisted extrusion molding

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yangwei Wang ◽  
Peilun Lv ◽  
Jian Li ◽  
Liying Yu ◽  
Guodong Yuan ◽  
...  
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Theoretical Research ◽  
Error Sources ◽  
Printing Technology ◽  
Content Type ◽  
Printing Ink ◽  
Printing Parameters ◽  
Chitosan Gel ◽  
Printing Method

Purpose This paper aims to propose a suitable atomizing solidification chitosan (CS) gel liquid extrusion molding technology for the three dimensional (3D) printing method, and experiments verify the feasibility of this method. Design/methodology/approach This paper mainly uses experimental means, combined with theoretical research. The preparation method, solidification forming method and 3D printing method of CS gel solution were studied. The CS gel printing mechanism and printing error sources are analyzed on the basis of the CS gel ink printing results, printing performance with different ratios of components by constructing a gel print prototype, experiments evaluating the CS gel printing technology and the effects of the process parameters on the scaffold formation. Findings CS printing ink was prepared; the optimal formula was found; the 3 D printing experiment of CS was completed; the optimal printing parameters were obtained; and the reliability of the forming prototype, printing ink and gel printing process was verified, which allowed for the possibility to apply the 3 D printing technology to the manufacturing of a CS gel structure. Originality/value This study can provide theoretical and technical support for the potential application of CS 3 D printed gels in tissue engineering.

scholarly journals On-Chip Fabrication and In-Flow 3D-Printing of Cell-Laden Microgel Constructs: From Chip to Scaffold Materials in One Integral Process

2021 ◽  
Author(s):  
Stephan Förster ◽  
Jürgen Groll ◽  
Benjamin Reineke ◽  
Stephan Hauschild ◽  
Ilona Paulus ◽  
...  
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Cross Linking ◽  
Cell Protection ◽  
Free Standing ◽  
Produce Cell ◽  
Chip Fabrication ◽  
Integral Process ◽  
Scaffold Materials ◽  
On Chip

Bioprinting has evolved into a thriving technology for the fabrication of cell-laden scaffolds. Bioinks are the most critical component for bioprinting. Recently, microgels have been introduced as a very promising bioink enabling cell protection and the control of the cellular microenvironment. However, their microfluidic fabrication inherently seemed to be a limitation. Here we introduce a direct coupling of microfluidics and 3D-printing for the microfluidic production of cell-laden microgels with direct in-flow bioprinting into stable scaffolds. The methodology enables the continuous on-chip encapsulation of cells into monodisperse microdroplets with subsequent in-flow cross-linking to produce cell-laden microgels, which after exiting a microtubing are automatically jammed into thin continuous microgel filaments. The integration into a 3D printhead allows direct in-flow printing of the filaments into free-standing three-dimensional scaffolds. The method is demonstrated for different cross-linking methods and cell lines. With this advancement, microfluidics is no longer a bottleneck for biofabrication. <br>

scholarly journals Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 774 ◽  
Author(s):  
Damir Godec ◽  
Santiago Cano ◽  
Clemens Holzer ◽  
Joamin Gonzalez-Gutierrez
Keyword(s):  
Stainless Steel ◽  
3D Printing ◽  
Tensile Properties ◽  
Layer Thickness ◽  
Flow Rate ◽  
Three Dimensional ◽  
Steel Powder ◽  
Extrusion Temperature ◽  
Fused Filament Fabrication ◽  
Printing Parameters

Fused filament fabrication (FFF) combined with debinding and sintering could be an economical process for three-dimensional (3D) printing of metal parts. In this paper, compounding, filament making, and FFF processing of feedstock material with 55% vol. of 17-4PH stainless steel powder in a multicomponent binder system are presented. The experimental part of the paper encompasses central composite design for optimization of the most significant 3D printing parameters (extrusion temperature, flow rate multiplier, and layer thickness) to obtain maximum tensile strength of the 3D-printed specimens. Here, only green specimens were examined in order to be able to determine the optimal parameters for 3D printing. The results show that the factor with the biggest influence on the tensile properties was flow rate multiplier, followed by the layer thickness and finally the extrusion temperature. Maximizing all three parameters led to the highest tensile properties of the green parts.

scholarly journals On-Chip Fabrication and In-Flow 3D-Printing of Cell-Laden Microgel Constructs: From Chip to Scaffold Materials in One Integral Process

2021 ◽  
Author(s):  
Stephan Förster ◽  
Jürgen Groll ◽  
Benjamin Reineke ◽  
Stephan Hauschild ◽  
Ilona Paulus ◽  
...  
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Cross Linking ◽  
Cell Protection ◽  
Free Standing ◽  
Produce Cell ◽  
Chip Fabrication ◽  
Integral Process ◽  
Scaffold Materials ◽  
On Chip

Bioprinting has evolved into a thriving technology for the fabrication of cell-laden scaffolds. Bioinks are the most critical component for bioprinting. Recently, microgels have been introduced as a very promising bioink enabling cell protection and the control of the cellular microenvironment. However, their microfluidic fabrication inherently seemed to be a limitation. Here we introduce a direct coupling of microfluidics and 3D-printing for the microfluidic production of cell-laden microgels with direct in-flow bioprinting into stable scaffolds. The methodology enables the continuous on-chip encapsulation of cells into monodisperse microdroplets with subsequent in-flow cross-linking to produce cell-laden microgels, which after exiting a microtubing are automatically jammed into thin continuous microgel filaments. The integration into a 3D printhead allows direct in-flow printing of the filaments into free-standing three-dimensional scaffolds. The method is demonstrated for different cross-linking methods and cell lines. With this advancement, microfluidics is no longer a bottleneck for biofabrication. <br>

scholarly journals Modelling and Investigation of Crack Growth for 3D-Printed Acrylonitrile Butadiene Styrene (ABS) with Various Printing Parameters and Ambient Temperatures

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3737
Author(s):  
Yousef Lafi A. Alshammari ◽  
Feiyang He ◽  
Muhammad A. Khan
Keyword(s):  
3D Printing ◽  
Crack Growth ◽  
Three Dimensional ◽  
Acrylonitrile Butadiene Styrene ◽  
Fused Deposition Modelling ◽  
Structural Dynamic ◽  
Fused Deposition ◽  
Nozzle Size ◽  
Printing Parameters ◽  
Butadiene Styrene

Three-dimensional (3D) printing is one of the significant industrial manufacturing methods in the modern era. Many materials are used for 3D printing; however, as the most used material in fused deposition modelling (FDM) technology, acrylonitrile butadiene styrene (ABS) offers good mechanical properties. It is perfect for making structures for industrial applications in complex environments. Three-dimensional printing parameters, including building orientation, layers thickness, and nozzle size, critically affect the crack growth in FDM structures under complex loads. Therefore, this paper used the dynamic bending vibration test to investigate their influence on fatigue crack growth (FCG) rate under dynamic loads and the Paris power law constant C and m. The paper proposed an analytical solution to determine the stress intensity factor (SIF) at the crack tip based on the measurement of structural dynamic response. The experimental results show that the lower ambient temperature, as well as increased nozzle size and layer thickness, provide a lower FCG rate. The printing orientation, which is the same as loading, also slows the crack growth. The linear regression between these parameters and Paris Law’s coefficient also proves the same conclusion.

scholarly journals Three-dimensional Hydrogels of Alginate/chitosan Semi-interpenetrating Polymer Networks and Nanocelluloses

2021 ◽  
Author(s):  
Priscila Siqueira ◽  
Ana de Lima ◽  
Felipe Medeiros ◽  
Augusta Isaac ◽  
Katia Novack ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Dimensional Stability ◽  
Cellulose Nanocrystals ◽  
Biomedical Applications ◽  
Cellulose Nanofibers ◽  
Polymer Networks ◽  
Three Dimensional ◽  
Controlled Drug Release ◽  
Interpenetrating Polymer Networks ◽  
Post Treatment

Abstract The hydrogels are advanced materials used in biomedical applications during wound healing, controlled drug release and to prepare scaffolds. In this work are prepared hydrogels of alginate/chitosan (Alg/Ch) semi-interpenetrating polymer networks (semi-IPN’s) and nanocelluloses. The hydrogels after preparation by freeze drying are namely simply as gels. The cellulose nanocrystals (CNC’s) are obtained from acid hydrolysis of bleached Eucalyptus pulps and oxidized cellulose nanocrystals (CNCT’s) prepared by (2,2,6,6-tetramethylpiperidin-1-yl)oxyl radical catalyzed reaction as known as TEMPO reaction. The cellulose nanofibers (NFC’s) are obtained from mechanical shearing of cellulose pulps and oxidized NFC’s by TEMPO-mediated reaction (NFCT’s). The nanocellulose suspension and gels are characterized by FTIR at ATR mode, TGA, XRD, TEM, SEM, X-ray computed microtomography (micro-CT) and DMTA. The addition of CNC’s, NFC’s, CNCT’s or NFCT’s in the microstructure of gels increases their dimensional stabilities. The best results are obtained when CNCT’s and NFCT’s are added. The mechanical properties and dimensional stability of Alg/Ch semi-IPN’s increase after controlled thermal post-treatment. The heating during thermal post-treatment boosts the physicochemical interactions in the microstructures of semi-IPN’s. The biological assays show biocompatibility of fibroblast cells on the substrates, and differentiation and proliferation up seven days. The optimized mechanical properties, dimensional stability and biocompatibility of the gels studied in this work are important parameters for potential biomedical applications of these biomaterials.

scholarly journals Three-Dimensional Printing Constructs Based on the Chitosan for Tissue Regeneration: State of the Art, Developing Directions and Prospect Trends

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2663 ◽  
Author(s):  
Farnoosh Pahlevanzadeh ◽  
Rahmatollah Emadi ◽  
Ali Valiani ◽  
Mahshid Kharaziha ◽  
S. Ali Poursamar ◽  
...  
Keyword(s):  
3D Printing ◽  
Biomedical Applications ◽  
Three Dimensional ◽  
Historical Background ◽  
Patient Specific ◽  
Technical Problems ◽  
Precise Adjustment ◽  
Developing Directions ◽  
Traditional Manufacturing ◽  
Printing Techniques

Chitosan (CS) has gained particular attention in biomedical applications due to its biocompatibility, antibacterial feature, and biodegradability. Hence, many studies have focused on the manufacturing of CS films, scaffolds, particulate, and inks via different production methods. Nowadays, with the possibility of the precise adjustment of porosity size and shape, fiber size, suitable interconnectivity of pores, and creation of patient-specific constructs, 3D printing has overcome the limitations of many traditional manufacturing methods. Therefore, the fabrication of 3D printed CS scaffolds can lead to promising advances in tissue engineering and regenerative medicine. A review of additive manufacturing types, CS-based printed constructs, their usages as biomaterials, advantages, and drawbacks can open doors to optimize CS-based constructions for biomedical applications. The latest technological issues and upcoming capabilities of 3D printing with CS-based biopolymers for different applications are also discussed. This review article will act as a roadmap aiming to investigate chitosan as a new feedstock concerning various 3D printing approaches which may be employed in biomedical fields. In fact, the combination of 3D printing and CS-based biopolymers is extremely appealing particularly with regard to certain clinical purposes. Complications of 3D printing coupled with the challenges associated with materials should be recognized to help make this method feasible for wider clinical requirements. This strategy is currently gaining substantial attention in terms of several industrial biomedical products. In this review, the key 3D printing approaches along with revealing historical background are initially presented, and ultimately, the applications of different 3D printing techniques for fabricating chitosan constructs will be discussed. The recognition of essential complications and technical problems related to numerous 3D printing techniques and CS-based biopolymer choices according to clinical requirements is crucial. A comprehensive investigation will be required to encounter those challenges and to completely understand the possibilities of 3D printing in the foreseeable future.

Solid-state foaming of acrylonitrile butadiene styrene through microcellular 3D printing process

2021 ◽  
pp. 0021955X2110094
Author(s):  
Rupesh Dugad ◽  
G Radhakrishna ◽  
Abhishek Gandhi
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Acrylonitrile Butadiene Styrene ◽  
Average Cell Size ◽  
Average Cell ◽  
Printing Process ◽  
Specific Strength ◽  
Nozzle Temperature ◽  
Printing Parameters ◽  
Butadiene Styrene

The lightweight products with superior specific strength are in great demand in numerous applications such as automotive, aerospace, biomedical, sports, etc. This work focussed on the manufacturing of lightweight products using the cellular three dimensional (3D) printing process. In this work, the continuous microcellular morphology has been developed in a single foamed filament using 3 D printing of carbon-di-oxide (CO2) saturated acrylonitrile butadiene styrene (ABS) filaments. The microcellular structures with average cell size in the range of 6–1040 µm were developed. The influence of printing parameters; nozzle temperature, feed rate, and flow rate on the foam characteristics and cell morphology at different levels were investigated. The different kinds of observed foamed extrudate irregularities were discussed.

Sign in / Sign up

Export Citation Format

Share Document