Tight Robust Formulation for Uncertain Reserve Activation of an Electric Vehicle Aggregator

2021 ◽  
Author(s):  
Ivan Pavic ◽  
Hrvoje Pandzic ◽  
Tomislav Capuder
Keyword(s):  
Electric Vehicle ◽  
Robust Formulation

Adaptive identification methods of nonlinear random electrical signal

2020 ◽  
Vol 64 (1-4) ◽  
pp. 431-438
Author(s):  
Jian Liu ◽  
Lihui Wang ◽  
Zhengqi Tian
Keyword(s):  
Wavelet Transform ◽  
Electric Vehicle ◽  
Signal To Noise Ratio ◽  
Sudden Change ◽  
Electrical Signal ◽  
Signal Recognition ◽  
State Variable ◽  
Signal Characteristics ◽  
The Matrix ◽  
Kalman Filter Algorithm

The nonlinearity of the electric vehicle DC charging equipment and the complexity of the charging environment lead to the complex and changeable DC charging signal of the electric vehicle. It is urgent to study the distortion signal recognition method suitable for the electric vehicle DC charging. Focusing on the characteristics of fundamental and ripple in DC charging signal, the Kalman filter algorithm is used to establish the matrix model, and the state variable method is introduced into the filter algorithm to track the parameter state, and the amplitude and phase of the fundamental waves and each secondary ripple are identified; In view of the time-varying characteristics of the unsteady and abrupt signal in the DC charging signal, the stratification and threshold parameters of the wavelet transform are corrected, and a multi-resolution method is established to identify and separate the unsteady and abrupt signals. Identification method of DC charging distortion signal of electric vehicle based on Kalman/modified wavelet transform is used to decompose and identify the signal characteristics of the whole charging process. Experiment results demonstrate that the algorithm can accurately identify ripple, sudden change and unsteady wave during charging. It has higher signal to noise ratio and lower mean root mean square error.

Planning a project of the creation of an electric vehicle technical assistance point

2020 ◽  
pp. 117-123
Author(s):  
Totska Olesia ◽  
Glovatsky Anastasia
Keyword(s):  
Electric Vehicle ◽  
Technical Assistance ◽  
Critical Path ◽  
Project Planning ◽  
The Creation

The purpose of the article is to plan a project of an electric vehicle technicalassistance point. the methodology of the study is to use the critical path method.the scientific novelty of the obtained results is that the article describes the practicalaspects of project planning of the creation of an electric vehicle technical assistancepoint. In particular, the tasks of the project are described, labor, material and financialresources necessary for its realization are specified. conclusions. The implementationof the developed project will effectively manage the content, time and resources ofthe project of the creation of an electric vehicle technical assistance point.

CONVERTING THE VEHICLE BY REPLACING THE INTERNAL COMBUSTION ENGINE

2019 ◽  
pp. 29-35
Author(s):  
Oleksandr Gryshchuk ◽  
Volodymyr Hladchenko ◽  
Uriy Overchenko
Keyword(s):  
Internal Combustion Engine ◽  
Electric Vehicle ◽  
Electric Motor ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Environmental Safety ◽  
Environmental Conservation ◽  
Sales Forecasts ◽  
Financial Investments ◽  
Near Future

This article looks at some comparative statistics on the development and use of electric vehicles (hereinafter referred to as EM) as an example of sales and future sales forecasts for EM in countries that focus on environmental conservation. Examples of financial investments already underway and to be made in the near future by the largest automakers in the development and distribution of EM in the world are given. Steps are taken to improve the environmental situation in countries (for example, the prohibition of entry into the city center), the scientific and applied problem of improving the energy efficiency and environmental safety of the operation of wheeled vehicles (hereinafter referred to as the CTE). The basic and more widespread schemes of conversion of the internal combustion engine car (hereinafter -ICE) to the electric motor car (by replacing the gasoline or diesel electric motor), as well as the main requirements that must be observed for the safe use and operation of the electric vehicle. The problem is solved by justifying the feasibility of re-equipment of the KTZ by replacing the internal combustion engine with an electric motor. On the basis of the statistics collected by the State Automobile Transit Research Institute on the number of issued conclusions of scientific and technical expertise regarding the approval of the possibility of conversion of a car with an internal combustion engine (gasoline or diesel) to a car with an electric motor (electric vehicle), the conclusions on the feasibility of such conclusion were made. Keywords: electricvehicles, ecological safety, electricmotor, statistics provided, car, vehicle by replacing.

Effect of Inner and Outer Wheels Driving Force Control on Small Electric Vehicle

2020 ◽  
Vol 17 (4) ◽  
pp. 8246-8254
Author(s):  
K. Shibazaki ◽  
H. Nozaki
Keyword(s):  
Control System ◽  
Angular Velocity ◽  
Electric Vehicle ◽  
Force Constant ◽  
Force Control ◽  
Driving Force ◽  
Vehicle Control ◽  
Steering Angle ◽  
Force Control System ◽  
The Difference

In this study, in order to improve steering stability during turning, we devised an inner and outer wheel driving force control system that is based on the steering angle and steering angular velocity, and verified its effectiveness via running tests. In the driving force control system based on steering angle, the inner wheel driving force is weakened in proportion to the steering angle during a turn, and the difference in driving force is applied to the inner and outer wheels by strengthening the outer wheel driving force. In the driving force control (based on steering angular velocity), the value obtained by multiplying the driving force constant and the steering angular velocity,  that differentiates the driver steering input during turning output as the driving force of the inner and outer wheels. By controlling the driving force of the inner and outer wheels, it reduces the maximum steering angle by 40 deg and it became possible to improve the cornering marginal performance and improve the steering stability at the J-turn. In the pylon slalom it reduces the maximum steering angle by 45 deg and it became possible to improve the responsiveness of the vehicle. Control by steering angle is effective during steady turning, while control by steering angular velocity is effective during sharp turning. The inner and outer wheel driving force control are expected to further improve steering stability.

Auto Markets in the World and Strategy of Japan’s Companies

2019 ◽  
Vol 10 (10) ◽  
pp. 1003-1008
Author(s):  
Hiroyuki Matsuoka ◽  
Keyword(s):  
Saudi Arabia ◽  
Electric Vehicle ◽  
New Technologies ◽  
Auto Industry ◽  
Domestic Market ◽  
Automatic Driving ◽  
The World ◽  
Almost All ◽  
Made In

In the world auto market, top three companies are VW(Volkswagen), Runault-Nissan-Mistubishi, and Toyota. About some selected countries and areas, China, England, Italy, Australia, Germany, Turkey, Russia, Sweden, USA, Brazil, UAE, Japan, Vietnam and Thailand are more competitive. However, the situation is different. Seeing monopolistic market countries and areas, Saudi Arabia, Taiwan, Korea, Malaysia, France, India, and Pakistan, in particular, the influence of Japan to Taiwan, India, and Pakistan is very big. But in Korea and France, their own companies’ brands occupy the market. In Japan domestic market, the overall situation is competitive. Almost all vehicles made in Japan are Japanese brand. From now on, we have to note the development of electric vehicle (EV) and other new technologies such as automatic driving and connected car. That is because they will give a great impact on the auto industry and market of Japan. Now Japan’s auto industry is going to be consolidated into three groups, Honda, Toyota group, and Renault-Nissan-Mitsubishi group for seeking the scale merit of economy. Therefore, I will pay attention to the worldwide development of EV and other new technologies and the reorganization of auto companies groups.

Sign in / Sign up

Export Citation Format

Share Document