Design of Ka-Band Doherty Power Amplifier Using 0.15μmd GaN on SiC Process Based on Novel Complex Load Modulation

2021 ◽  
Author(s):  
Xinyu Zhou ◽  
Srabanti Chowdhury ◽  
Rafael Perez Martinez ◽  
Bhawani Shankar
Keyword(s):  
Power Amplifier ◽  
Complex Load ◽  
Ka Band ◽  
Novel Complex ◽  
Doherty Power Amplifier ◽  
Load Modulation

scholarly journals Extended Bandwidth and Increased Efficiency Quasi-Doherty Power Amplifier Design With A Revised Approach For Load Modulation

2021 ◽  
Author(s):  
Seyedehmarzieh Rouhani ◽  
Kasra Rouhi ◽  
Adib Abrishamifar ◽  
Majid Tayarani
Keyword(s):  
Power Amplifier ◽  
High Power ◽  
Maximum Output Power ◽  
Input Power ◽  
Maximum Efficiency ◽  
Maximum Output ◽  
Power Added Efficiency ◽  
Active Feedback ◽  
Doherty Power Amplifier ◽  
Load Modulation

This paper presents an approach to power added efficiency (PAE) increase for Quasi-Doherty power amplifier (Q-DPA) design. For this aim, active feedback is utilized instead of a passive quarter wavelength transmission line (TL) usage, which is conventionally used in the DPA schematic. PAE increase can be done by applying an accurate load modulation to the main amplifier (PAmain), especially for technologies in which output impedance of the main power amplifier (Zout,main) considerably varies in both low and high power regions. Because such precise modulation is still based on a modified TL, this approach suffers from the inherent narrowband behavior of that TL. As a consequence, expecting a wideband DPA may not be satisfied in all cases. To deal with this issue, active feedback is used to play a role in reaching PAmain, which is not saturated before, to its maximum efficiency at the highest level of received input power (Pin) in the high power region. Following Zout,main trajectories in power and frequency sweeps simultaneously just by a passive TL are not needed anymore. Still, for the sake of preventing total PAE degradation due to the consummated power by the feedback path’s power amplifier (PAfeedback) should be limited, analytical confinement is provided in this work. A comparison is made between GaAs pHEMT 0.25um MMIC technology-based conventional DPA and the proposed revised approach based-DPA to verify the mentioned approach. The proposed PA shows maximum output power of 33.4 dBm, maximum PAE of 41.6, fractional bandwidth of 11%. The Q-DPA works with a maximum power gain of 24.16.

Sign in / Sign up

Export Citation Format

Share Document