The Effects on Bearing Load-Carrying Capacity of Two-Sided Striated Roughness

1974 ◽  
Vol 96 (4) ◽  
pp. 554-558 ◽  
Author(s):  
S. K. Rhow ◽  
H. G. Elrod
Keyword(s):  
Carrying Capacity ◽  
Multiple Scale ◽  
Load Carrying Capacity ◽  
Transient Effects ◽  
Slider Bearing ◽  
Scale Method ◽  
Load Carrying ◽  
Bearing Load ◽  
Order Of Magnitude ◽  
Final Equation

The multiple-scale method which was earlier employed for lubricating films with striated roughness on one of two opposing surfaces is here extended to include striated roughness on both surfaces. In some papers, the transient effects due to the roughness have been neglected. However, the present analysis shows that the term representing these effects is of the same order of magnitude as others retained in the final equation governing the average pressure. As an example, it is shown that with the same overall roughness characteristics, the load-carrying capacity of an infinitely wide slider bearing varies according to how the same roughness is distributed on opposing surfaces.

The Influence of Surface Tension on Bearings Lubricated With Bubbly Liquids

1980 ◽  
Vol 102 (1) ◽  
pp. 91-96 ◽  
Author(s):  
E. H. Smith
Keyword(s):  
Surface Tension ◽  
Bubble Surface ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Bubbly Liquids ◽  
Viscous Forces ◽  
Tilting Pad ◽  
Load Carrying ◽  
Bearing Load ◽  
Order Of Magnitude

An order of magnitude analysis of the Rayleigh-Plesset equation of motion of a bubble surface reveals that inertia and viscous forces can be ignored in realistic bearing configurations and that surface tension plays an important role. The influence of gas bubbles in liquid lubrication is examined with particular reference to the steadily-loaded plane-inclined slider-bearing. Load carrying capacity is virtually unaffected by lubricant gasification. The centre of pressure can be considerably modified, depending partially on the value of a new dimensionless group—the configuration number φ. It appears that the tilting-pad thrust bearing will sometimes be unstable in operation, resulting in bearing failure.

A Comparison of Porous Structures on the Performance of a Slider Bearing with Surface Roughness in Couple Stress Fluid Film Lubrication

2015 ◽  
Vol 813-814 ◽  
pp. 921-937
Author(s):  
P.S. Rao ◽  
Santosh Agarwal
Keyword(s):  
Surface Roughness ◽  
Carrying Capacity ◽  
Couple Stress ◽  
Type Equation ◽  
Random Variable ◽  
Couple Stress Fluid ◽  
Load Carrying Capacity ◽  
Porous Structures ◽  
Slider Bearing ◽  
Load Carrying

This paper presents the theoretical study and analyzes the comparison of porous structures on the performance of a couple stress fluid based on rough slider bearing. The globular sphere model of Kozeny-Carman and Irmay’s capillary fissures model have been subjected to investigations. A more general form of surface roughness is mathematically modeled by a stochastic random variable with non-zero mean, variance and skewness. The stochastically averaged Reynolds type equation has been solved under suitable boundary conditions to obtain the pressure distribution in turn which gives the expression for the load carrying capacity, frictional force and coefficient of friction. The results are illustrated by graphical representations which show that the introduction of combined porous structure with couple stress fluid results in an enhanced load carrying capacity more in the case of Kozeny-Carman model as compared to Irmay’s model.

scholarly journals A STUDY OF FERROFLUID LUBRICATION BASED ROUGH SINE FILM SLIDER BEARING WITH ASSORTED POROUS STRUCTURE

2019 ◽  
Vol 59 (2) ◽  
pp. 144-152
Author(s):  
Mohmmadraiyan M. Munshi ◽  
Ashok R. Patel ◽  
Gunamani B. Deheri
Keyword(s):  
Porous Structure ◽  
Carrying Capacity ◽  
Graphical Representation ◽  
Negative Impact ◽  
Positive Impact ◽  
Numerical Approach ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Load Carrying ◽  
The Impact

This paper attempts to study a ferrofluid lubrication based rough sine film slider bearing with assorted porous structure using a numerical approach. The fluid flow of the system is regulated by the Neuringer-Rosensweig model. The impact of the transverse surface roughness of the system has been derived using the Christensen and Tonder model. The corresponding Reynolds’ equation has been used to calculate the pressure distribution which, in turn, has been the key to formulate the load carrying capacity equation. A graphical representation is made to demonstrate the calculated value of the load carrying capacity which is a dimensionless unit. The numbers thus derived have been used to prove that ferrofluid lubrication aids the load carrying capacity. The study suggests that the positive impact created by magnetization in the case of negatively skewed roughness helps to partially nullify the negative impact of the transverse roughness. Further investigation implies that when the Kozeny-Carman’s model is used, the overall performance is enhanced. The Kozeny-Carman’s model is a form of an empirical equation used to calculate permeability that is dependent on various parameters like pore shape, turtuosity, specific surface area and porosity. The success of the model can be accredited to its simplicity and efficiency to describe measured permeability values. The obtained equation was used to predict the permeability of fibre mat systems and of vesicular rocks.

Hydrodynamic Lubrication of Finite Slider Bearings: Effect of One Dimensional Film Shape, and Their Computer Aided Optimum Designs

1983 ◽  
Vol 105 (1) ◽  
pp. 48-63 ◽  
Author(s):  
C. Bagci ◽  
A. P. Singh
Keyword(s):  
Numerical Solution ◽  
Carrying Capacity ◽  
Reynolds Equation ◽  
Hydrodynamic Lubrication ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Design Data ◽  
Slider Bearings ◽  
Load Carrying ◽  
Computer Aided

The effect of the film shape on the load carrying capacity of a hydrodynamically lubricated bearing has not been considered an important factor in the past. Flat-faced tapered bearing and the Raileigh’s step bearing of constant film thickness have been the primary forms of film shapes for slider bearing studies and design data developments. This article, by the computer aided numerical solution of the Reynolds equation for two dimensional incompressible lubricant flow, investigates hydrodynamically lubricated slider bearings having different film shapes and studies the effect of the film shape on the performance characteristics of finite bearings; and it shows that optimized bearing with film shapes having descending slope toward the trailing edge of the bearing has considerably higher load carrying capacity than the optimized flat-faced tapered bearing of the same properties. For example the truncated cycloidal film shape yields 26.3 percent higher load carrying capacity for Lz/Lx = 1 size ratio, and 44 percent higher for Lz/Lx = 1/2. The article then presents charts for the optimum designs of finite slider bearings having tapered, exponential, catenoidal, polynomial, and truncated-cycloidal film shapes, and illustrates their use in numerical bearing design examples. These charts also furnish information on flow rate, side leakage, temperature rise, coefficient of friction, and friction power loss in optimum bearings. Appended to the article are analytical solutions for infinitely wide bearings with optimum bearing characteristics. The computer aided numerical solution of the Reynolds equation in most general form is presented by which finite or infinitely wide hydrodynamically or hydrostatically lubricated bearings, externally pressurized or not, can be studied. A digital computer program is made available.

An Approximate Solution for the Infinitely Long, Gas Lubricated Slider Bearing

1965 ◽  
Vol 87 (4) ◽  
pp. 1085-1086
Author(s):  
H. J. Sneck
Keyword(s):  
Exact Solution ◽  
Approximate Solution ◽  
Pressure Distribution ◽  
Carrying Capacity ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Load Carrying ◽  
Numerical Design ◽  
The One ◽  
Design Calculations

The only exact solution for the infinitely long, gas-lubricated slider bearing is the one obtained by Harrison [1] for the plane wedge isothermal film. The resultant formulas for the pressure distribution and load-carrying capacity are complicated and therefore quite cumbersome in numerical design calculations. In the analysis to follow, a simplified, approximate solution is developed which can be applied to any infinitely long slider geometry.

Pressure Buildup Mechanism in a Textured Inlet of a Hydrodynamic Contact

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Samuel Cupillard ◽  
Michel J. Cervantes ◽  
Sergei Glavatskih
Keyword(s):  
Velocity Profile ◽  
Carrying Capacity ◽  
Flow Analysis ◽  
Maximum Efficiency ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Pressure Buildup ◽  
Flow Recirculation ◽  
Recirculating Flow ◽  
Load Carrying

A flow analysis is carried out for an inclined slider bearing with the aim of showing the governing mechanism at conditions where an optimum in load carrying capacity is achieved. The effects of surface texture on pressure buildup and load carrying capacity are explained for a textured slider bearing geometry. Numerical simulations are performed for laminar, steady, and isothermal flows. The energy transferred to the fluid from the moving wall is converted into pressure in the initial part of the converging contact and into losses in the second part. The convergence ratio can be increased, in order to get the greatest pressure gradient, until the limiting value where flow recirculation begins to occur. The texture appears to achieve its maximum efficiency when its depth is such that the velocity profile is stretched at its maximum extent without incurring incoming recirculating flow. The wall profile shape controlling the velocity profile can be optimized for many hydrodynamic contacts.

Geometry Optimization of Textured Three-Dimensional Micro- Thrust Bearings

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
C. I. Papadopoulos ◽  
E. E. Efstathiou ◽  
P. G. Nikolakopoulos ◽  
L. Kaiktsis
Keyword(s):  
Carrying Capacity ◽  
Stokes Equations ◽  
Load Capacity ◽  
Three Dimensional ◽  
Load Carrying Capacity ◽  
Thrust Bearings ◽  
Micro Channels ◽  
Wide Range ◽  
Load Carrying ◽  
Bearing Load

This paper presents an optimization study of the geometry of three-dimensional micro-thrust bearings in a wide range of convergence ratios. The optimization goal is the maximization of the bearing load carrying capacity. The bearings are modeled as micro-channels, consisting of a smooth moving wall (rotor), and a stationary wall (stator) with partial periodic rectangular texturing. The flow field is calculated from the numerical solution of the Navier-Stokes equations for incompressible isothermal flow; processing of the results yields the bearing load capacity and friction coefficient. The geometry of the textured channel is defined parametrically for several width-to-length ratios. Optimal texturing geometries are obtained by utilizing an optimization tool based on genetic algorithms, which is coupled to the CFD code. Here, the design variables define the bearing geometry and convergence ratio. To minimize the computational cost, a multi-objective approach is proposed, consisting in the simultaneous maximization of the load carrying capacity and minimization of the bearing convergence ratio. The optimal solutions, identified based on the concept of Pareto dominance, are equivalent to those of single-objective optimization problems for different convergence ratio values. The present results demonstrate that the characteristics of the optimal texturing patterns depend strongly on both the convergence ratio and the width-to-length ratio. Further, the optimal load carrying capacity increases at increasing convergence ratio, up to an optimal value, identified by the optimization procedure. Finally, proper surface texturing provides substantial load carrying capacity even for parallel or slightly diverging bearings. Based on the present results, we propose simple formulas for the design of textured micro-thrust bearings.

scholarly journals EFFECT OF SLIP VELOCITY ON THE PERFORMANCE OF A SHORT BEARING LUBRICATED WITH A MAGNETIC FLUID

2013 ◽  
Vol 53 (6) ◽  
pp. 890-894 ◽  
Author(s):  
Rachana U. Patel ◽  
G. M. Deheri
Keyword(s):  
Aspect Ratio ◽  
Magnetic Fluid ◽  
Carrying Capacity ◽  
Velocity Slip ◽  
Load Carrying Capacity ◽  
Slip Parameter ◽  
Slider Bearing ◽  
Load Carrying ◽  
Improved Performance ◽  
Bearing System

This paper aims at analyzing the effect of velocity slip on the behavior of a magnetic fluid based infinitely short hydrodynamic slider bearing. Solving the Reynolds’ equation, the expression for pressure distribution is obtained. In turn, this leads to the calculation of the load carrying capacity. Further, the friction is also computed. It is observed that the magnetization paves the way for an overall improved performance of the bearing system. However the magnetic fluid lubricant fails to alter the friction. It is established that the slip parameter needs to be kept at minimum to achieve better performance of the bearing system, although the effect of the slip parameter on the load carrying capacity is in most situations, negligible. It is found that for large values of the aspect ratio, the effect of slip is increasingly significant. Of course, the aspect ratio plays a crucial role in this improved performance. Lastly, it is established that the bearing can support a load even in the absence of flow, which does not happen in the case of a conventional lubricant.

On the study of Rayleigh step slider bearings lubricated with non-Newtonian Rabinowitsch fluid

2017 ◽  
Vol 69 (5) ◽  
pp. 666-672
Author(s):  
N.B. Naduvinamani ◽  
Siddharam Patil ◽  
S.S. Siddapur
Keyword(s):  
Carrying Capacity ◽  
Reynolds Equation ◽  
Maximum Load ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Content Type ◽  
Slider Bearings ◽  
Load Carrying ◽  
Modified Reynolds Equation ◽  
Frictional Coefficients

Purpose Nowadays, the use of Newtonian fluid as a lubricant is diminishing day by day, and the use of non-Newtonian fluids has gained importance. This paper presents an analysis of the static characteristics of Rayleigh step slider bearing lubricated with non-Newtonian Rabinowitsch fluid, which has not been studied so far. The purpose of this paper is to derive the modified Reynolds equation for Rabinowitsch fluids for two regions and to obtain the optimum bearing parameters for the Rayleigh step slider bearings. Design/methodology/approach The governing equations relevant to the problem under consideration are derived. The modified Reynolds equation is derived, and it is found to be highly non-linear and hence small perturbation method is adopted to find solution. Findings From this study it is found that there is an increase in the load-carrying capacity, pressure and frictional coefficients for dilatant fluids as compared to the corresponding Newtonian case. Further, for dilatant lubricants the maximum load-carrying capacity is attained for the slightly larger values of entry region length of Rayleigh step bearing as compared to Newtonian and pseudoplastic lubricants. Originality/value Rabinowitsch fluid is used for the study of lubrication characteristics of Rayleigh step bearings. The author believes that the paper presents these results for the first time.

Theoretical and experimental investigation of the effect of oil aeration on the load-carrying capacity of a hydrodynamic journal bearing

2007 ◽  
Vol 221 (7) ◽  
pp. 779-786 ◽  
Author(s):  
M. J. Goodwin ◽  
D Dong ◽  
H Yu ◽  
J. L. Nikolajsen
Keyword(s):  
Carrying Capacity ◽  
Lubricating Oil ◽  
Hydrodynamic Effect ◽  
Air Bubbles ◽  
Load Carrying Capacity ◽  
Hydrodynamic Bearing ◽  
Low Viscosity ◽  
Discernible Effect ◽  
Load Carrying ◽  
Bearing Load

It is widely assumed that the presence of air bubbles in the lubricating oil of a hydrodynamic bearing gives rise to a reduced load-carrying capacity, because of the high compressibility and low viscosity of the air and its tendency, therefore, to upset the hydrodynamic effect. The aim of the work described in the current paper was to investigate the accuracy of this assumption by theoretical and experimental means, and also to provide quantitative data relating to the concentration of air bubbles and their size that are required for any discernible effect. The paper has the following three main contributions: (a) a theoretical model based on Reynolds equation, but modified to allow for the effect of aeration on lubricant viscosity and density, is proposed; (b) a novel method of injecting air bubbles into lubricating oil and for measuring their size and concentration was developed; and (c) an experimental hydrodynamic bearing test rig was implemented and run with both aerated and non-aerated lubricating oil, and in each case measurements of the load-carrying capacity for various operating speeds were made. The results from both theoretical and experiment work show that the presence of air bubbles in the lubricating oil leads to a slight decrease in bearing load-carrying capacity at high operating speeds. For normal operating speeds, however, (i.e. those resulting in eccentricity ratios greater than 0.6) results show that the presence of air bubbles has little effect on bearing load-carrying capacity.

Sign in / Sign up

Export Citation Format

Share Document