Programmable Multispectral Imager Development as Light Weight Payload for Low Cost Fixed Wing Unmanned Aerial Vehicles

2009 ◽  
Author(s):  
Yiding Han ◽  
Austin Jensen ◽  
Huifang Dou
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Near Infrared ◽  
Low Cost ◽  
Measurement Unit ◽  
Light Weight ◽  
Aerial Vehicles ◽  
System Module ◽  
Multispectral Remote Sensing ◽  
Cost Efficient ◽  
Multispectral Imager

In this paper, we have developed a light-weight and cost-efficient multispectral imager payload for low cost fixed wing UAVs (Unmanned Aerial Vehicles) that need no runway for takeoff and landing. The imager is band-reconfigurable, covering both visual (RGB) and near infrared (NIR) spectrum. The number of the RGB and NIR sensors is scalable, depending on the demands of specific applications. The UAV on-board microcomputer programs and controls the imager system, synchronizing each camera individually to capture airborne imagery. It also bridges the payload to the UAV system by sending and receiving message packages. The airborne imagery is time-stamped with the corresponding local and geodetic coordinates data measured by the onboard IMU (Inertia Measurement Unit) and GPS (Global Positioning System) module. Subsequently, the imagery will be orthorectified with the recorded geo-referencing data. The application of such imager system includes multispectral remote sensing, ground mapping, target recognition, etc. In this paper, we will outline the technologies, demonstrate our experimental results from actual UAV flight missions, and compare the results with our previous imager system.

scholarly journals LOW-COST NAVIGATION AND GUIDANCE SYSTEMS FOR UNMANNED AERIAL VEHICLES — PART 2: ATTITUDE DETERMINATION AND CONTROL

2013 ◽  
Vol 20 (1) ◽  
pp. 97-126 ◽  
Author(s):  
Roberto Sabatini ◽  
Leopoldo Rodríguez ◽  
Anish Kaharkar ◽  
Celia Bartel ◽  
Tesheen Shaid ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Attitude Determination ◽  
Low Cost ◽  
Sensor Data ◽  
Measurement Unit ◽  
Medium Size ◽  
Integrated Navigation ◽  
Aerial Vehicles ◽  
Guidance Systems ◽  
And Control

ABSTRACT This paper presents the second part of the research activity performed by Cranfield University to assess the potential of low-cost navigation sensors for Unmanned Aerial Vehicles (UAVs). This part focuses on carrier-phase Global Navigation Satellite Systems (GNSS) for attitude determination and control of small to medium size UAVs. Recursive optimal estimation algorithms were developed for combining multiple attitude measurements obtained from different observation points (i.e., antenna locations), and their efficiencies were tested in various dynamic conditions. The proposed algorithms converged rapidly and produced the required output even during high dynamics manoeuvres. Results of theoretical performance analysis and simulation activities are presented in this paper, with emphasis on the advantages of the GNSS interferometric approach in UAV applications (i.e., low cost, high data-rate, low volume/weight, low signal processing requirements, etc.). The simulation activities focussed on the AEROSONDE UAV platform and considered the possible augmentation provided by interferometric GNSS techniques to a low-cost and low-weight/volume integrated navigation system (presented in the first part of this series) which employed a Vision-Based Navigation (VBN) system, a Micro-Electro-Mechanical Sensor (MEMS) based Inertial Measurement Unit (IMU) and code-range GNSS (i.e., GPS and GALILEO) for position and velocity computations. The integrated VBN-IMU-GNSS (VIG) system was augmented using the inteferometric GNSS Attitude Determination (GAD) sensor data and a comparison of the performance achieved with the VIG and VIG/GAD integrated Navigation and Guidance Systems (NGS) is presented in this paper. Finally, the data provided by these NGS are used to optimise the design of a hybrid controller employing Fuzzy Logic and Proportional-Integral-Derivative (PID) techniques for the AEROSONDE UAV.

scholarly journals Low-Cost Navigation and Guidance Systems for Unmanned Aerial Vehicles — Part 1: Vision-Based and Integrated Sensors

2012 ◽  
Vol 19 (2) ◽  
pp. 71-98 ◽  
Author(s):  
Roberto Sabatini ◽  
Celia Bartel ◽  
Anish Kaharkar ◽  
Tesheen Shaid ◽  
Leopoldo Rodriguez ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicles ◽  
System Architecture ◽  
Navigation System ◽  
Low Cost ◽  
Measurement Unit ◽  
Integrated Navigation ◽  
Integrated Navigation System ◽  
Aerial Vehicles ◽  
Vision Based Navigation ◽  
Mems Imu

Abstract In this paper we present a new low-cost navigation system designed for small size Unmanned Aerial Vehicles (UAVs) based on Vision-Based Navigation (VBN) and other avionics sensors. The main objective of our research was to design a compact, light and relatively inexpensive system capable of providing the Required Navigation Performance (RNP) in all phases of flight of a small UAV, with a special focus on precision approach and landing, where Vision Based Navigation (VBN) techniques can be fully exploited in a multisensor integrated architecture. Various existing techniques for VBN were compared and the Appearance-Based Approach (ABA) was selected for implementation. Feature extraction and optical flow techniques were employed to estimate flight parameters such as roll angle, pitch angle, deviation from the runway and body rates. Additionally, we addressed the possible synergies between VBN, Global Navigation Satellite System (GNSS) and MEMS-IMU (Micro-Electromechanical System Inertial Measurement Unit) sensors, as well as the aiding from Aircraft Dynamics Models (ADMs). In particular, by employing these sensors/models, we aimed to compensate for the shortcomings of VBN and MEMS-IMU sensors in high-dynamics attitude determination tasks. An Extended Kalman Filter (EKF) was developed to fuse the information provided by the different sensors and to provide estimates of position, velocity and attitude of the UAV platform in real-time. Two different integrated navigation system architectures were implemented. The first used VBN at 20 Hz and GPS at 1 Hz to augment the MEMS-IMU running at 100 Hz. The second mode also included the ADM (computations performed at 100 Hz) to provide augmentation of the attitude channel. Simulation of these two modes was accomplished in a significant portion of the AEROSONDE UAV operational flight envelope and performing a variety of representative manoeuvres (i.e., straight climb, level turning, turning descent and climb, straight descent, etc.). Simulation of the first integrated navigation system architecture (VBN/IMU/GPS) showed that the integrated system can reach position, velocity and attitude accuracies compatible with CAT-II precision approach requirements. Simulation of the second system architecture (VBN/IMU/GPS/ADM) also showed promising results since the achieved attitude accuracy was higher using the ADM/VBS/IMU than using VBS/IMU only. However, due to rapid divergence of the ADM virtual sensor, there was a need for frequent re-initialisation of the ADM data module, which was strongly dependent on the UAV flight dynamics and the specific manoeuvring transitions performed

scholarly journals Editorial for the Special Issue “Forestry Applications of Unmanned Aerial Vehicles (UAVs)”

Forests ◽  
2020 ◽  
Vol 11 (4) ◽  
pp. 406 ◽  
Author(s):  
Alessandro Matese
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Low Cost ◽  
Hyperspectral Data ◽  
Added Value ◽  
Special Issue ◽  
High Resolution Data ◽  
Aerial Vehicles ◽  
Potential Applications ◽  
Fast Development ◽  
Cost Efficient

Unmanned aerial vehicles (UAVs) are new platforms that have been increasingly used in the last few years for forestry applications that benefit from the added value of flexibility, low cost, reliability, autonomy, and capability of timely provision of high-resolution data. This special issue (SI) collects nine papers reporting research on different forestry applications using UAV imagery. The special issue covers seven Red-Green-Blue (RGB) sensor papers, three papers on multispectral imagery, and one further paper on hyperspectral data acquisition system. Several data processing and machine learning methods are presented. The special issue provides an overview regarding potential applications to provide forestry characteristics in a timely, cost-efficient way. With the fast development of sensors technology and image processing algorithms, the forestry potential applications will growing fast, but future work should consider the consistency and repeatability of these novel techniques.

scholarly journals Development of Non Expensive Technologies for Precise Maneuvering of Completely Autonomous Unmanned Aerial Vehicles

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 391
Author(s):  
Luca Bigazzi ◽  
Stefano Gherardini ◽  
Giacomo Innocenti ◽  
Michele Basso
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Degrees Of Freedom ◽  
Vision System ◽  
Video Stream ◽  
Measurement Unit ◽  
Absolute Position ◽  
Light Load ◽  
Aerial Vehicles ◽  
Angular Velocities ◽  
Custom Hardware

In this paper, solutions for precise maneuvering of an autonomous small (e.g., 350-class) Unmanned Aerial Vehicles (UAVs) are designed and implemented from smart modifications of non expensive mass market technologies. The considered class of vehicles suffers from light load, and, therefore, only a limited amount of sensors and computing devices can be installed on-board. Then, to make the prototype capable of moving autonomously along a fixed trajectory, a “cyber-pilot”, able on demand to replace the human operator, has been implemented on an embedded control board. This cyber-pilot overrides the commands thanks to a custom hardware signal mixer. The drone is able to localize itself in the environment without ground assistance by using a camera possibly mounted on a 3 Degrees Of Freedom (DOF) gimbal suspension. A computer vision system elaborates the video stream pointing out land markers with known absolute position and orientation. This information is fused with accelerations from a 6-DOF Inertial Measurement Unit (IMU) to generate a “virtual sensor” which provides refined estimates of the pose, the absolute position, the speed and the angular velocities of the drone. Due to the importance of this sensor, several fusion strategies have been investigated. The resulting data are, finally, fed to a control algorithm featuring a number of uncoupled digital PID controllers which work to bring to zero the displacement from the desired trajectory.

Thermal and multispectral images from Unmanned Aerial Vehicles (UAVs) for water presence detection in temporary streams: first results

2021 ◽  
Author(s):  
Massimo Micieli ◽  
Gianluca Botter ◽  
Giuseppe Mendicino ◽  
Alfonso Senatore
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Near Infrared ◽  
Infrared Band ◽  
Temporary Streams ◽  
Water Index ◽  
Long Wavelength ◽  
Research Activities ◽  
Aerial Vehicles ◽  
Normalized Difference Water Index ◽  
First Results

<p>UAVs (Unmanned Aerial Vehicles) are increasingly used for monitoring river networks with a broad range of purposes. In this contribution, we focus on the use of multispectral sensors, either in the thermal infrared band LWIR (Long-wavelength infrared, 8-15 µm) or in the infrared band NIR (Near-infrared, 0.75-1.4 µm) to map network dynamics in temporary streams. Specifically, we discuss the first results of a set of surveys carried out in 2020 within a small river catchment located in northern Calabria (southern Italy), as part of the research activities of the ERC-funded DyNET project. Preliminary, a rigorous methodology was identified to perform on-site surveys and to process and analyse the acquired images. Experimental results show that the combined use of LWIR and NIR sensors is a suitable solution for detecting water presence in channels characterized by different hydraulic and morphologic conditions. LWIR sensors alone allow one to discriminate water presence only when the thermal contrast with the surrounding environment is high. On the other hand, NIR sensors permit to detect the presence of water in most of the analyzed settings through the estimate of the Normalized Difference Water Index (NDWI). However, NIR sensors can be misled in case of shallow water depth, due to the NIR radiation emitted by the riverbed merging with that of the water. Overall, the study demonstrates that a combined LWIR/NIR approach allows addressing a broader range of conditions. Moreover, the information provided can be further enhanced by combining it with geomorphologic information and basic hydraulic concepts.</p>

scholarly journals Eyes in the Sky: Assessing the Feasibility of Low-Cost, Ready-to-Use Unmanned Aerial Vehicles to Monitor Primate Populations Directly

2019 ◽  
Vol 91 (1) ◽  
pp. 69-82
Author(s):  
Brandon P. Semel ◽  
Sarah M. Karpanty ◽  
Faramalala Francette Vololonirina ◽  
Ando Nantenaina Rakotonanahary
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Low Cost ◽  
Aerial Vehicles

scholarly journals Model-Based Autonomous Navigation with Moment of Inertia Estimation for Unmanned Aerial Vehicles

Sensors ◽  
2019 ◽  
Vol 19 (11) ◽  
pp. 2467 ◽  
Author(s):  
Hery Mwenegoha ◽  
Terry Moore ◽  
James Pinchin ◽  
Mark Jabbal
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Navigation System ◽  
Process Model ◽  
Unscented Kalman Filter ◽  
Low Cost ◽  
Moment Of Inertia ◽  
Model Parameters ◽  
Main Process ◽  
Model Based ◽  
Aerial Vehicles

The dominant navigation system for low-cost, mass-market Unmanned Aerial Vehicles (UAVs) is based on an Inertial Navigation System (INS) coupled with a Global Navigation Satellite System (GNSS). However, problems tend to arise during periods of GNSS outage where the navigation solution degrades rapidly. Therefore, this paper details a model-based integration approach for fixed wing UAVs, using the Vehicle Dynamics Model (VDM) as the main process model aided by low-cost Micro-Electro-Mechanical Systems (MEMS) inertial sensors and GNSS measurements with moment of inertia calibration using an Unscented Kalman Filter (UKF). Results show that the position error does not exceed 14.5 m in all directions after 140 s of GNSS outage. Roll and pitch errors are bounded to 0.06 degrees and the error in yaw grows slowly to 0.65 degrees after 140 s of GNSS outage. The filter is able to estimate model parameters and even the moment of inertia terms even with significant coupling between them. Pitch and yaw moment coefficient terms present significant cross coupling while roll moment terms seem to be decorrelated from all of the other terms, whilst more dynamic manoeuvres could help to improve the overall observability of the parameters.

scholarly journals Accurate Landing of Unmanned Aerial Vehicles Using Ground Pattern Recognition

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1532 ◽  
Author(s):  
Jamie Wubben ◽  
Francisco Fabra ◽  
Carlos T. Calafate ◽  
Tomasz Krzeszowski ◽  
Johann M. Marquez-Barja ◽  
...  
Keyword(s):  
Pattern Recognition ◽  
Unmanned Aerial Vehicles ◽  
High Precision ◽  
Low Cost ◽  
Target Position ◽  
Flight Behavior ◽  
Ground Pattern ◽  
Aerial Vehicles ◽  
Exact Position ◽  
Precision Landing

Over the last few years, several researchers have been developing protocols and applications in order to autonomously land unmanned aerial vehicles (UAVs). However, most of the proposed protocols rely on expensive equipment or do not satisfy the high precision needs of some UAV applications such as package retrieval and delivery or the compact landing of UAV swarms. Therefore, in this work, a solution for high precision landing based on the use of ArUco markers is presented. In the proposed solution, a UAV equipped with a low-cost camera is able to detect ArUco markers sized 56 × 56 cm from an altitude of up to 30 m. Once the marker is detected, the UAV changes its flight behavior in order to land on the exact position where the marker is located. The proposal was evaluated and validated using both the ArduSim simulation platform and real UAV flights. The results show an average offset of only 11 cm from the target position, which vastly improves the landing accuracy compared to the traditional GPS-based landing, which typically deviates from the intended target by 1 to 3 m.

scholarly journals Operational Framework for Rapid, Very-high Resolution Mapping of Glacial Geomorphology Using Low-cost Unmanned Aerial Vehicles and Structure-from-Motion Approach

2019 ◽  
Vol 11 (1) ◽  
pp. 65 ◽  
Author(s):  
Marek W. Ewertowski ◽  
Aleksandra M. Tomczyk ◽  
David J. A. Evans ◽  
David H. Roberts ◽  
Wojciech Ewertowski
Keyword(s):  
High Resolution ◽  
Unmanned Aerial Vehicles ◽  
Structure From Motion ◽  
Low Cost ◽  
Control Point ◽  
Glacial Geomorphology ◽  
High Resolution Mapping ◽  
Aerial Vehicles ◽  
Resolution Mapping ◽  
Very High

This study presents the operational framework for rapid, very-high resolution mapping of glacial geomorphology, with the use of budget Unmanned Aerial Vehicles and a structure-from-motion approach. The proposed workflow comprises seven stages: (1) Preparation and selection of the appropriate platform; (2) transport; (3) preliminary on-site activities (including optional ground-control-point collection); (4) pre-flight setup and checks; (5) conducting the mission; (6) data processing; and (7) mapping and change detection. The application of the proposed framework has been illustrated by a mapping case study on the glacial foreland of Hørbyebreen, Svalbard, Norway. A consumer-grade quadcopter (DJI Phantom) was used to collect the data, while images were processed using the structure-from-motion approach. The resultant orthomosaic (1.9 cm ground sampling distance—GSD) and digital elevation model (7.9 cm GSD) were used to map the glacial-related landforms in detail. It demonstrated the applicability of the proposed framework to map and potentially monitor detailed changes in a rapidly evolving proglacial environment, using a low-cost approach. Its coverage of multiple aspects ensures that the proposed framework is universal and can be applied in a broader range of settings.

scholarly journals Method for Estimating Solar Energy Potential Based on Photogrammetry from Unmanned Aerial Vehicles

Electronics ◽  
2020 ◽  
Vol 9 (12) ◽  
pp. 2144
Author(s):  
Jose Eduardo Fuentes ◽  
Francisco David Moya ◽  
Oscar Danilo Montoya
Keyword(s):  
Solar Energy ◽  
Unmanned Aerial Vehicles ◽  
3D Model ◽  
Low Cost ◽  
Atmospheric Conditions ◽  
Solar Panels ◽  
Energy Potential ◽  
Aerial Vehicles ◽  
3D Data ◽  
Surface Models

This study presents a method to estimate the solar energy potential based on 3D data taken from unmanned aerial devices. The solar energy potential on the roof of a building was estimated before the placement of solar panels using photogrammetric data analyzed in a geographic information system, and the predictions were compared with the data recorded after installation. The areas of the roofs were chosen using digital surface models and the hemispherical viewshed algorithm, considering how the solar radiation on the roof surface would be affected by the orientation of the surface with respect to the sun, the shade of trees, surrounding objects, topography, and the atmospheric conditions. The results show that the efficiency percentages of the panels and the data modeled by the proposed method from surface models are very similar to the theoretical efficiency of the panels. Radiation potential can be estimated from photogrammetric data and a 3D model in great detail and at low cost. This method allows the estimation of solar potential as well as the optimization of the location and orientation of solar panels.

Sign in / Sign up

Export Citation Format

Share Document