Research on the Loading Pattern of Reactor Core With MOX Fuel in the First Cycle

2012 ◽  
Author(s):  
Tianqi Zhang ◽  
Shihe Yu ◽  
Xinrong Cao
Keyword(s):  
Cross Section ◽  
Reactor Core ◽  
Fuel Utilization ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
Loading Pattern ◽  
Mox Fuel ◽  
Initial Cycle ◽  
Calculation Code

In order to research the performance of Pressurized Water Reactor (PWR) with 1/3 MOX fuel in the initial cycle, this paper serves Qinshan II reactor core as the reference core to design suitable MOX assemblies and study relevant core properties. The analyses documented within use assembly cross section calculation code CASMO-4 and core calculation code SIMULATE-3 studied by Studsvik. The purpose of this paper is to demonstrate that the Qinshan II reactor is capable of complying with the requirement for MOX fuel utilization without significant changes to the design of the plant. Several impacts on key physics parameters and safety analysis assumptions, introduced by MOX, are discussing in the paper.

CFD Analysis of the Coolant Mixing within the Upper Plenum of a Pressurized Water Reactor (PWR)

2013 ◽  
Vol 444-445 ◽  
pp. 411-415 ◽  
Author(s):  
Fu Cheng Zhang ◽  
Shen Gen Tan ◽  
Xun Hao Zheng ◽  
Jun Chen
Keyword(s):  
Temperature Distribution ◽  
Fluid Dynamic ◽  
Characteristic Temperature ◽  
Reactor Core ◽  
Flow Distribution ◽  
Sensitivity Study ◽  
Cfd Model ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor

In this study, a Computational Fluid Dynamic (CFD) model is established to obtain the 3-D flow characteristic, temperature distribution of the pressurized water reactor (PWR) upper plenum and hot-legs. In the CFD model, the flow domain includes the upper plenum, the 61 control rod guide tubes, the 40 support columns, the three hot-legs. The inlet boundary located at the exit of the reactor core and the outlet boundary is set at the hot-leg pipes several meters away from upper plenum. The temperature and flow distribution at the inlet boundary are given by sub-channel codes. The computational mesh used in the present work is polyhedron element and a mesh sensitivity study is performed. The RANS equations for incompressible flow is solved with a Realizable k-ε turbulence model using the commercial CFD code STAR-CCM+. The analysis results show that the flow field of the upper plenum is very complex and the temperature distribution at inlet boundary have significant impact to the coolant mixing in the upper plenum as well as the hot-legs. The detailed coolant mixing patterns are important references to design the reactor core fuel management and the internal structure in upper plenum.

scholarly journals Contribution to the study of fission products release from nuclear fuels in severe accident conditions: effect of the pO2 on Cs, Mo and Ba speciation

2020 ◽  
Vol 6 ◽  
pp. 2 ◽  
Author(s):  
Claire Le Gall ◽  
Fabienne Audubert ◽  
Jacques Léchelle ◽  
Yves Pontillon ◽  
Jean-Louis Hazemann
Keyword(s):  
Oxygen Potential ◽  
Fission Products ◽  
Severe Accident ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
Mox Fuel ◽  
Chemical Behaviour ◽  
Accident Conditions ◽  
The Impact

The objective of this work is to experimentally investigate the effect of the oxygen potential on the fuel and FP chemical behaviour in conditions representative of a severe accident. More specifically, the speciation of Cs, Mo and Ba is investigated. These three highly reactive FP are among the most abundant elements produced through 235U and 239Pu thermal fission and may have a significant impact on human health and environmental contamination in case of a light water reactor severe accident. This work has set out to contribute to the following three fields: providing experimental data on Pressurized Water Reactor (PWR) MOX fuel behaviour submitted to severe accident conditions and related FP speciation; going further in the understanding of FP speciation mechanisms at different stages of a severe accident; developing a method to study volatile FP behaviour, involving the investigation of SIMFuel samples manufactured at low temperature through SPS. In this paper, a focus is made on the impact of the oxygen potential towards the interaction between irradiated MOX fuels and the cladding, the interaction between Mo and Ba under oxidizing conditions and the assessment of the oxygen potential during sintering.

State space modeling of reactor core in a pressurized water reactor

2014 ◽  
Author(s):  
A. Ashaari ◽  
T. Ahmad ◽  
Mustaffa Shamsuddin ◽  
Wan Munirah W. M ◽  
M. Adib Abdullah
Keyword(s):  
State Space ◽  
Reactor Core ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
Space Modeling ◽  
State Space Modeling
Sign in / Sign up

Export Citation Format

Share Document