Self-reconfigurable multilegged robot swarms collectively accomplish challenging terradynamic tasks

2021 ◽  
Vol 6 (56) ◽  
pp. eabf1628
Author(s):  
Yasemin Ozkan-Aydin ◽  
Daniel I. Goldman

Swarms of ground-based robots are presently limited to relatively simple environments, which we attribute in part to the lack of locomotor capabilities needed to traverse complex terrain. To advance the field of terradynamically capable swarming robotics, inspired by the capabilities of multilegged organisms, we hypothesize that legged robots consisting of reversibly chainable modular units with appropriate passive perturbation management mechanisms can perform diverse tasks in variable terrain without complex control and sensing. Here, we report a reconfigurable swarm of identical low-cost quadruped robots (with directionally flexible legs and tail) that can be linked on demand and autonomously. When tasks become terradynamically challenging for individuals to perform alone, the individuals suffer performance degradation. A systematic study of performance of linked units leads to new discoveries of the emergent obstacle navigation capabilities of multilegged robots. We also demonstrate the swarm capabilities through multirobot object transport. In summary, we argue that improvement capabilities of terrestrial swarms of robots can be achieved via the judicious interaction of relatively simple units.

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4911
Author(s):  
Qian Hao ◽  
Zhaoba Wang ◽  
Junzheng Wang ◽  
Guangrong Chen

Stability is a prerequisite for legged robots to execute tasks and traverse rough terrains. To guarantee the stability of quadruped locomotion and improve the terrain adaptability of quadruped robots, a stability-guaranteed and high terrain adaptability static gait for quadruped robots is addressed. Firstly, three chosen stability-guaranteed static gaits: intermittent gait 1&2 and coordinated gait are investigated. In addition, then the static gait: intermittent gait 1, which is with the biggest stability margin, is chosen to do a further research about quadruped robots walking on rough terrains. Secondly, a position/force based impedance control is employed to achieve a compliant behavior of quadruped robots on rough terrains. Thirdly, an exploratory gait planning method on uneven terrains with touch sensing and an attitude-position adjustment strategy with terrain estimation are proposed to improve the terrain adaptability of quadruped robots. Finally, the proposed methods are validated by simulations.


Robotica ◽  
2021 ◽  
pp. 1-19
Author(s):  
Shengjie Wang ◽  
Kun Wang ◽  
Chunsong Zhang ◽  
Jian S Dai

Abstract A kinetostatic approach applied to the design of a backflip strategy for quadruped robots is proposed in this paper. Inspired by legged animals and taking the advantage of the leg workspace, this strategy provides an optimal design idea for the low-cost quadruped robots to achieve self-recovery after overturning. Through kinetostatic and energy analysis, a four-stepped backflip strategy based on the selected rotation axis with minimum energy is proposed, with a process of selection, lifting, rotating, and protection. The kinematic factors that affect the backflip are investigated, along with the relationship between the design parameters of the leg and trunk being analyzed. At the end of this paper, the strategy is validated by a simulation and experiments with a prototype called DRbot, demonstrating that the strategy endows the robot a strong self-recovery ability in various terrains.


Water SA ◽  
2019 ◽  
Vol 45 (3 July) ◽  
Author(s):  
CM Niebuhr ◽  
M Van Dijk ◽  
JN Bhagwan

In South Africa there is currently no notable use of modern small-scale hydrokinetic (HK) energy systems, mainly due to formerly low-cost coal-powered electricity. This renewable energy option makes use of the kinetic energy from flowing water, rather than potential energy, which is more often used in conventional hydropower. Updated refined versions of this technology are now being investigated and manufactured due to the global drive towards reducing carbon emissions and increasing energy efficiency. These modular units allow for installation of HK turbines into existing water infrastructure with very little civil works. The study’s objective was to develop a simplified design and implementation process for HK devices within the South African legislative and regulatory environment. Approximately 66% of South Africa’s water supply is used by the agricultural sector with more than 6 500 km of canal systems running through many areas which could benefit from alternative energy sources. The recent electricity crisis in the country allowed for problem resolution through funding opportunities and thereby an introduction of an innovative and sustainable technology to provide renewable electricity where otherwise not feasible. A pilot HK project was implemented in an applicable section on the Boegoeberg irrigation canal in the Northern Cape Province and tested for optimum functionality and correct application. This process allowed evolution of a development process for the implementation of HK devices in existing water infrastructure.


2011 ◽  
Vol 48-49 ◽  
pp. 1002-1005
Author(s):  
Hui Ping Lin ◽  
Xu Wei Zhu ◽  
Wei Ping Li ◽  
Li Liu ◽  
Zhao Hui Xie

This paper presents a supply chain collaboration service (SCCS) in SaaS paradigm to support inter-organization interaction between business partners. SaaS is very attractive to enterprises because it offers low cost and flexible on-demand IT solution. The paper presents an extensible service oriented architecture that can integrate business application as a service into SCCS. In order to improve the supply chain performance, it provides flexible support for information sharing between business partners. The SCCS prototype has been developed.


Author(s):  
Muhammad Bilal Khan

We present the design and overall development of an eight degrees of freedom (DOF) based Bioinspired Quadruped Robot (BiQR). The robot is designed with a skeleton made of cedar wood. The wooden skeleton is based on exploring the potential of cedar wood to be a choice for legged robots’ design. With a total weight of 1.19 kg, the robot uses eight servo motors that run the position control. Relying on the inverse kinematics, the control design enables the robot to perform the walk gait-based locomotion in a controlled environment. The robot has two main aspects: 1) the initial wooden skeleton development of the robot showing it to be an acceptable choice for robot design, 2) the robot’s applicability as a low-cost legged platform to test the locomotion in a laboratory or a classroom setting.


Bioanalysis ◽  
2021 ◽  
Author(s):  
Scott Davis ◽  
Joel Usansky ◽  
Shibani Mitra-Kaushik ◽  
John Kellie ◽  
Kimberly Honrine ◽  
...  

Challenges for data storage during drug development have become increasingly complex as the pharmaceutical industry expands in an environment that requires on-demand availability of data and resources for users across the globe. While the efficiency and relative low cost of cloud services have become increasingly attractive, hesitancy toward the use of cloud services has decreased and there has been a significant shift toward real-world implementation. Within GxP laboratories, the considerations for cloud storage of data include data integrity and security, as well as access control and usage for users around the globe. In this review, challenges and considerations when using cloud storage options for the storage of laboratory-based GxP data are discussed and best practices are defined.


2019 ◽  
Vol 1 (6) ◽  
pp. 883-891 ◽  
Author(s):  
Bhavaniprasad Yalagala ◽  
Parikshit Sahatiya ◽  
Venkat Mattela ◽  
Sushmee Badhulika

Sign in / Sign up

Export Citation Format

Share Document