scholarly journals Bifurcation Analysis of a Simplified Model of a Pressure Relief Valve Attached to a Pipe

2014 ◽  
Vol 13 (2) ◽  
pp. 704-721 ◽  
Author(s):  
Csaba Bazsó ◽  
Alan R. Champneys ◽  
Csaba J. Hös
Keyword(s):  
Bifurcation Analysis ◽  
Pressure Relief Valve ◽  
Simplified Model ◽  
Relief Valve ◽  
Pressure Relief

Optimization of Operation Parameters for Direct Spring Loaded Pressure Relief Valve in a Pipeline System

2018 ◽  
Vol 140 (5) ◽  
Author(s):  
Hyunjun Kim ◽  
Sanghyun Kim ◽  
Youngman Kim ◽  
Jonghwan Kim
Keyword(s):  
Pressure Relief Valve ◽  
Pipeline System ◽  
Relief Valve ◽  
Pressure Relief ◽  
Computational Costs ◽  
Constant Degree ◽  
System A ◽  
Disk Mass ◽  
Analysis Scheme ◽  
Surge Control

A direct spring loaded pressure relief valve (DSLPRV) is an efficient hydraulic structure used to control a potential water hammer in pipeline systems. The optimization of a DSLPRV was explored to consider the instability issue of a valve disk and the surge control for a pipeline system. A surge analysis scheme, named the method of characteristics, was implemented into a multiple-objective genetic algorithm to determine the adjustable factors in the operation of the DSLPRV. The forward transient analysis and multi-objective optimization of adjustable factors, such as the spring constant, degree of precompression, and disk mass, showed substantial relaxation in the surge pressure and oscillation of valve disk in a hypothetical pipeline system. The results of the regression analysis of surge were compared with the optimization results to demonstrate the potential of the developed method to substantially reduce computational costs.

The Effect of Pressure Relief Valve Blowdown and Fire Conditions on the Thermo-Hydraulics Within a Pressure Vessel

2006 ◽  
Vol 128 (3) ◽  
pp. 467-475 ◽  
Author(s):  
A. M. Birk ◽  
J. D. J. VanderSteen
Keyword(s):  
Thermal Stratification ◽  
Pressure Vessels ◽  
Pressure Relief Valve ◽  
Relief Valve ◽  
Pressure Relief ◽  
Pressure Transducers ◽  
Hydrocarbon Pool ◽  
Computer Controlled ◽  
C 50 ◽  
Fire Conditions

In the summers of 2000 and 2001, a series of controlled fire tests were conducted on horizontal 1890liter (500 US gallon) propane pressure vessels. The test vessels were instrumented with pressure transducers, liquid space, vapor space, and wall thermocouples, and an instrumented flow nozzle in place of a pressure relief valve (PRV). A computer controlled PRV was used to control pressure. The vessels were heated using high momentum, liquid propane utility torches. Open pool fires were not used for the testing because they are strongly affected by wind. These wind effects make it almost impossible to have repeatable test conditions. The fire conditions used were calibrated to give heat inputs similar to a luminous hydrocarbon pool fire with an effective blackbody temperature in the range of 850°C±50°C. PRV blowdown (i.e., blowdown=poppressure−reclosepressure) and fire conditions were varied in this test series while all other input parameters were held constant. The fire conditions were varied by changing the number of burners applied to the vessel wall areas wetted by liquid and vapor. It was found that the vessel content’s response and energy storage varied according to the fire conditions and the PRV operation. The location and quantity of the burners affected the thermal stratification within the liquid, and the liquid swelling (due to vapor generation in the liquid) at the liquid∕vapor interface. The blowdown of the PRV affected the average vessel pressure, average liquid temperature, and time to temperature destratification in the liquid. Large blowdown also delayed thermal rupture.

scholarly journals Forensic Engineering Techniques For Testing And Predicting Lp-Gas Container Relief Venting

2004 ◽  
Vol 21 (2) ◽  
Author(s):  
James A. Petersen
Keyword(s):  
Test Data ◽  
Pressure Relief Valve ◽  
Relief Valve ◽  
Pressure Relief ◽  
Temperature Changes ◽  
Flammable Gas ◽  
Forensic Engineering ◽  
Pressure Changes ◽  
Liquefied Gas

When An Lp-Gas Container Is Involved In A Fire, Flammable Gas Is Usually Vented From The Relief Valve. One Of The First Questions Is Whether The Container Vented The Gas That Caused The Fire Or Whether Gas Was Vented Due To The Fire Heating The Container. If The Relief Valve Vents Gas That Initiates The Fire, It Is Usually Due To An Overfilled Container. This Paper Discusses; 1) The Prediction Of The Rate Of Container Warming Due To Normal Temperature Changes, 2) The Resulting Pressure Changes Of The Liquefied Gas, 3) The Reaction Of The Pressure Relief Valve And The Quantity Of Lp-Gas Vented During The Operation Of The Relief Valve, 4) Designing The Experiment And 4) Adjusting The Model To Reflect Test Data.

The static and dynamic characteristics of a pressure relief valve with a proportional solenoid-controlled pilot stage

2002 ◽  
Vol 216 (2) ◽  
pp. 143-156 ◽  
Author(s):  
R Maiti ◽  
R Saha ◽  
J Watton
Keyword(s):  
Mathematical Model ◽  
Dynamic Characteristics ◽  
Dynamic Behaviour ◽  
Practical Experience ◽  
Pressure Relief Valve ◽  
Relief Valve ◽  
Pressure Relief ◽  
Static And Dynamic Characteristics ◽  
Good Comparison ◽  
The Mathematical Model

The steady state and dynamic characteristics of a two-stage pressure relief valve with proportional solenoid control of the pilot stage is studied theoretically as well as experimentally. The mathematical model is studied within the MATLAB-SIMULINK environment and the non-linearities have been considered via the use of appropriate SIMULINK blocks. The detailed modelling has resulted in a good comparison between simulation and measurement, albeit assumptions had to be made regarding the solenoid dynamic characteristic based upon practical experience. The use of this characteristic combined with additional dynamic terms not previously considered allows new estimations of internal characteristics to be made such as the damping flowrate. The overall dynamic behaviour has been shown to be dominated by the solenoid characteristic relating force to applied voltage.

Adaptive sliding mode control of a pressure relief valve

2016 ◽  
Vol 133 (6) ◽  
pp. 261-265
Author(s):  
Christoph Krimpmann ◽  
Torsten Bertram ◽  
Georg Schoppel ◽  
Ingo Glowatzky
Keyword(s):  
Sliding Mode Control ◽  
Sliding Mode ◽  
Pressure Relief Valve ◽  
Adaptive Sliding Mode Control ◽  
Relief Valve ◽  
Pressure Relief ◽  
Adaptive Sliding Mode ◽  
Mode Control

On the Pressure Relief Valve for the Lubrication System of an Internal Combustion Engine

2007 ◽  
Author(s):  
Antonio Giuffrida ◽  
Rosario Lanzafame
Keyword(s):  
Flow Rate ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Pressure Relief Valve ◽  
Design Parameters ◽  
Lubrication System ◽  
Relief Valve ◽  
Pressure Relief ◽  
Oil Flow

The lubrication system for automotive internal combustion engines consists of several components. Oil flow rate for lubrication is generated by a positive displacement pump equipped with a pressure relief valve, usually present in the casing of the pump to prevent high oil pressures building up in the system and to deliver to the sump the exceeding generated flow rate. This study focuses on the static and dynamic characteristics of the pressure relief valve with considerations about the stability of the overall system, according to design parameters of both the valve and the system itself.

Sign in / Sign up

Export Citation Format

Share Document