A High Order Curvature-Compensated Bandgap Voltage Reference with a Novel Error Amplifier

2017 ◽  
Vol 26 (09) ◽  
pp. 1750127 ◽  
Author(s):  
Gongyuan Zhao ◽  
Mao Ye ◽  
Yiqiang Zhao ◽  
Kai Hu ◽  
Ruishan Xin
Keyword(s):  
Monte Carlo Simulation ◽  
Power Supply ◽  
Supply Voltage ◽  
High Order ◽  
Cmos Process ◽  
Voltage Reference ◽  
Temperature Dependent ◽  
Error Amplifier ◽  
Bandgap Voltage Reference ◽  
Simulation Results

This paper presents a bandgap voltage reference (BGR), utilizing high order curvature-compensated technique with the temperature dependent resistor. Based on an improved error amplifier, [Formula: see text]80[Formula: see text]dB power supply rejection (PSR) @1[Formula: see text]kHz is achieved without additional complicated circuits. The circuit is fabricated in a standard [Formula: see text]m CMOS process, consuming 50[Formula: see text][Formula: see text]A at 25[Formula: see text]C with a supply voltage of 3.3[Formula: see text]V. Simulation results show that the proposed BGR can achieve a temperature coefficient as low as 1.18[Formula: see text]ppm/[Formula: see text]C over the temperature range from [Formula: see text]C to 120[Formula: see text]C. Monte Carlo simulation and Experimental Results validate the design.

A High-Order CMOS Bandgap Voltage Reference

2014 ◽  
Vol 989-994 ◽  
pp. 1165-1168
Author(s):  
Qian Neng Zhou ◽  
Yun Song Li ◽  
Jin Zhao Lin ◽  
Hong Juan Li ◽  
Chen Li ◽  
...  
Keyword(s):  
Power Supply ◽  
Supply Voltage ◽  
Absolute Temperature ◽  
High Order ◽  
Cmos Process ◽  
Voltage Reference ◽  
Power Supply Voltage ◽  
Power Supply Rejection Ratio ◽  
Voltage Deviation ◽  
Bandgap Voltage Reference

A high-order bandgap voltage reference (BGR) is designed by adopting a current which is proportional to absolute temperature T1.5. The high-order BGR is analyzed and simulated in SMIC 0.18μm CMOS process. Simulation results show that the designed high-order BGR achieves temperature coefficient of 2.54ppm/°C when temperature ranging from-55°C to 125°C. The high-order BGR at 10Hz, 100Hz, 1kHz, 10kHz and 100kHz achieves, respectively, the power supply rejection ratio of-64.01dB, -64.01dB, -64dB, -63.5dB and-53.2dB. When power supply voltage changes from 1.7V to 2.5V, the output voltage deviation of BGR is only 617.6μV.

A High-Order Curvature-Compensated Bandgap Voltage Reference for Micro-Gyroscope

2012 ◽  
Vol 503 ◽  
pp. 12-17
Author(s):  
Qiang Li ◽  
Xiao Yun Tan ◽  
Guan Shi Wang
Keyword(s):  
Power Supply ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Bandgap Reference ◽  
Voltage Reference ◽  
Temperature Dependent ◽  
Power Supply Voltage ◽  
Gyroscope System ◽  
Bandgap Voltage Reference ◽  
Reference Circuit

The reference is an important part of the micro-gyroscope system. The precision and stability of the reference directly affect the precision of the micro-gyroscope. Unlike the traditional bandgap reference circuit, a circuit using a temperature-dependent resistor ratio generated by a highly-resistive poly resistor and a diffusion resistor in CMOS technology is proposed in this paper. The complexity of the circuit is greatly reduced. Implemented with the standard 0.5μm CMOS technology and 9V power supply voltage, in the range of -40~120°C, the temperature coefficient of the proposed bandgap voltage reference can achieve to about 1.6 ppm/°C. The PSRR of the circuit is -107dB.

Single Inductor Bipolar Outputs DC-DC Converter with Current Mode Control Circuit

2013 ◽  
Vol 534 ◽  
pp. 220-226 ◽  
Author(s):  
Nobukazu Takai ◽  
Takashi Okada ◽  
Kenji Takahashi ◽  
Hajime Yokoo ◽  
Shunsuke Miwa ◽  
...  
Keyword(s):  
Power Supply ◽  
Supply Voltage ◽  
Current Mode ◽  
Cmos Process ◽  
Power Supply Voltage ◽  
Negative Power ◽  
Current Mode Control ◽  
Mode Control ◽  
Digital Still Camera ◽  
Simulation Results

Mobile equipment such as organic-EL display, digital still camera and so on re-quire both positive and negative power supply voltage to obtain high quality. Single InductorMultiple-Output (SIMO) DC-DC converter can provide a pair of positive and negative outputvoltages with only one external inductor. This paper describes SIMO DC-DC Converter usingproposed current-mode control (CMC) circuit. The proposed CMC circuit realizes high responsespeed for the change of load current. Spectre simulations with 0.18m CMOS process parameterare performed to verify the validity of the proposed converter. The simulation results indicatethat the proposed converter has higher response time compared with conventional converter.

DESIGN OF A CMOS BANDGAP REFERENCE CIRCUIT WITH A WIDE TEMPERATURE RANGE, HIGH PRECISION AND LOW TEMPERATURE COEFFICIENT

2014 ◽  
Vol 23 (08) ◽  
pp. 1450107 ◽  
Author(s):  
JUN-DA CHEN ◽  
CHENG-KAI YE
Keyword(s):  
Temperature Coefficient ◽  
High Precision ◽  
Supply Voltage ◽  
Cmos Process ◽  
Voltage Reference ◽  
Temperature Range ◽  
Wide Range ◽  
Bandgap Voltage Reference ◽  
Reference Circuit ◽  
Cmos Voltage Reference

This paper presents an approach to the design of a high-precision CMOS voltage reference. The proposed circuit is designed for TSMC 0.35 μm standard CMOS process. We design the first-order temperature compensation bandgap voltage reference circuit. The proposed post-simulated circuit delivers an output voltage of 0.596 V and achieves the reported temperature coefficient (TC) of 3.96 ppm/°C within the temperature range from -60°C to 130°C when the supply voltage is 1.8 V. When simulated in a smaller temperature range from -40°C to 80°C, the circuit achieves the lowest reported TC of 2.09 ppm/°C. The reference current is 16.586 μA. This circuit provides good performances in a wide range of temperature with very small TC.

A Novel Low Line Regulation Voltage Reference with No Amplifier

2018 ◽  
Vol 27 (10) ◽  
pp. 1850152 ◽  
Author(s):  
Qiang Li Li ◽  
WanLing Deng ◽  
Xiao Yu Ma ◽  
JunKai Huang
Keyword(s):  
Power Supply ◽  
Output Voltage ◽  
Power Supplies ◽  
Cmos Process ◽  
Voltage Reference ◽  
Bipolar Junction Transistor ◽  
Rejection Ratio ◽  
Power Supply Rejection Ratio ◽  
Junction Transistor ◽  
Simulation Results

A novel low line regulation voltage reference (VR) without an amplifier is presented in this paper. The design is achieved by subtracting two voltages which have the same temperature curves. All circuits use only one Bipolar Junction Transistor (BJT) to decrease the area greatly. Designed with the SMIC 0.18[Formula: see text][Formula: see text]m CMOS process, the simulation results show that the output voltage is 0.902[Formula: see text]V at TT process corner when the power supply is larger than 1.7[Formula: see text]V. The temperature coefficient (TC) is 3.6[Formula: see text]ppm/[Formula: see text]C to 7.4[Formula: see text]ppm/[Formula: see text]C at different power supplies and process corners. The simulated power supply rejection ratio (PSRR) is [Formula: see text]80[Formula: see text]dB at TT process corner when the power supply is 2.5[Formula: see text]V, and the PSRR at different process corners are almost the same. The line regulation of the proposed circuit is 0.005[Formula: see text]mV/V.

A 42ppm/∘C 0.7V 47nW Low-Complexity All-MOSFET Sub-Threshold Voltage Reference

2018 ◽  
Vol 27 (07) ◽  
pp. 1850105 ◽  
Author(s):  
Yuhua Liang ◽  
Zhangming Zhu
Keyword(s):  
Power Consumption ◽  
Temperature Coefficient ◽  
Threshold Voltage ◽  
Room Temperature ◽  
Supply Voltage ◽  
Low Complexity ◽  
Cmos Process ◽  
Voltage Reference ◽  
Temperature Ranges ◽  
Simulation Results

A low-power, low-supply, low-complexity all-MOSFET voltage reference is implemented in 0.18[Formula: see text][Formula: see text]m CMOS process. With the proposed architecture, the number of the transistors can be reduced to the greatest extent. As a result, the supply voltage can not only be decreased to as low as 0.7[Formula: see text]V, but the power consumption can also be optimized significantly. Simulation results show that the power consumption is 47[Formula: see text]nW, at a supply of 0.7[Formula: see text]V. A temperature coefficient (TC) of 42[Formula: see text]ppm/[Formula: see text]C is achieved when the temperature ranges from [Formula: see text]20[Formula: see text]C to 80[Formula: see text]C. At room temperature, the voltage reference features a line regulation (LR) of 2.66%/V.

scholarly journals A sub-1V high PSRR OpAmp based β-multiplier CMOS bandgap voltage reference with resistive division

2019 ◽  
Vol 15 (1) ◽  
pp. 155
Author(s):  
Anass SLAMTI ◽  
Youness MEHDAOUI ◽  
Driss CHENOUNI ◽  
Zakia LAKHLIAI
Keyword(s):  
Temperature Coefficient ◽  
Power Supply ◽  
Supply Voltage ◽  
Voltage Source ◽  
Voltage Reference ◽  
Voltage Range ◽  
Rejection Ratio ◽  
Power Supply Rejection Ratio ◽  
Bandgap Voltage Reference ◽  
Supply Rejection

<span lang="EN-US">A sub-1V opamp based β-multiplier CMOS bandgap voltage reference (BGVR) with high power supply rejection ratio (PSRR) and low temperature coefficient (TC) is proposed in this paper. A current mode regulator scheme is inserted to isolate the supply voltage of the operational amplifier (opamp) and the supply voltage of the BGVR core from the supply voltage source in order to reduce ripple sensitivity and to achieve a high PSRR. The proposed circuit is designed and simulated in 0.18-μm standard CMOS technology. The proposed voltage reference delivers an output voltage of 634.6mV at 27°C. Tthe measurement temperature coefficient is 22,3ppm/°C over temperature range -40°C to 140°C, power supply rejection ratio is -93dB at 10kHz and -71dB at 1MHz and a line regulation of 104μV/V is achieved over supply voltage range 1.2V to 1.8V. The layout area of the proposed circuit is 0.0337mm<sup>2</sup>. The proposed sub-1V bandgap voltage reference can be used as an internal voltage reference in low power LDO regulators and switching regulators.</span>

A High-Precision Bandgap Voltage Reference with Automatic Curvature-Compensation Technique

2019 ◽  
Vol 28 (13) ◽  
pp. 1950214
Author(s):  
Ze-kun Zhou ◽  
Hongming Yu ◽  
Yue Shi ◽  
Zhuo Wang ◽  
Bo Zhang
Keyword(s):  
Temperature Coefficient ◽  
High Precision ◽  
Power Supply ◽  
Supply Voltage ◽  
Adaptive Signal Processing ◽  
Voltage Reference ◽  
Temperature Drift ◽  
Temperature Range ◽  
Bandgap Voltage Reference ◽  
Compensation Technique

A high-precision bandgap voltage reference (BGR) with a novel curvature-compensation scheme is proposed in this paper. The temperature coefficient (TC) can be automatically optimized with a built-in adaptive curvature-compensation technique, which is realized in a digitization control way. An exponential curvature-compensation method is first adopted to reduce the TC in a certain degree, especially in low temperature range. Then, the temperature drift of BGR in higher temperature range can be further minimized by dynamic zero-temperature-coefficient point tracking (ZTCPT) with temperature changes. With the help of proposed adaptive signal processing, the output voltage of BGR can approximately maintain zero TC in a wider temperature range. Verification results of the BGR proposed in this paper, which is implemented in 0.35-[Formula: see text]m BiCMOS process, illustrate that the TC of 1.4[Formula: see text]ppm/∘C is realized under the power supply voltage of 3[Formula: see text]V and the power supply rejection of the proposed circuit is [Formula: see text][Formula: see text]dB without any filter capacitor.

An Integrated Ramp Generator for PWM Voltage Regulators

2014 ◽  
Vol 644-650 ◽  
pp. 3682-3685
Author(s):  
Xiao Zong Huang ◽  
Lun Cai Liu ◽  
Wen Gang Huang ◽  
Jun Luo ◽  
Dong Mei Zhu
Keyword(s):  
Power Supply ◽  
Temperature Compensation ◽  
Output Voltage ◽  
Voltage Regulators ◽  
Frequency Variation ◽  
Cmos Process ◽  
Voltage Reference ◽  
Zener Diode ◽  
Ramp Generator ◽  
Bandgap Voltage Reference

An integrated ramp generator is presented in this paper. For traditional implementations, the amplitude clamp is realized with zener diode to limit the output voltage to ±VZ, while the zener diode is not available for standard CMOS process. The transmission gate is utilized to make the output voltage in the determined range. The reference voltage is provided by a bandgap voltage reference with temperature compensation, which guarantees the temperature stabilization of the frequency of the ramp generator. The ramp generator was fabricated in a commercial CMOS process. The frequency of 44kHz is achieved under the power supply of 3.5V, and the frequency variation of 41kH to 46kHz with the power supply of 3.3V to 5V.

Sign in / Sign up

Export Citation Format

Share Document