THERMO GRAVIMETRIC AND DIFFERENTIAL THERMAL ANALYSIS OF CLAY OF WESTERN RAJASTHAN (INDIA)

2013 ◽  
Vol 22 ◽  
pp. 458-465
Author(s):  
M. S. SHEKHAWAT
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Strength Properties ◽  
Sanitary Ware ◽  
Thermo Gravimetric ◽  
Ball Clays

The paper presents the study of thermo gravimetric and differential thermal analysis of blended clay. Western part of Rajasthan (India) is rich resource of Ball clays and it is mainly used by porcelain, sanitary ware, and tile industry. The quality and grade of clay available in the region vary from one deposit to other. To upgrade the fired colour and strength properties, different variety of clays may be blended together. The paper compares the results of thermal analysis one of blended clay B2 with reference clay of Ukraine which is imported by industries owners. The result revealed that the blended clay is having mineral kaolinite while the Ukrainian clay is Halloysite.

Study on Character of Ilmenite Modified by Thermal Treatment

2011 ◽  
Vol 284-286 ◽  
pp. 2090-2093 ◽  
Author(s):  
Xue Liang Xiong ◽  
Zhi Yang ◽  
Hong Yong Ouyang
Keyword(s):  
Thermal Analysis ◽  
Solid Solution ◽  
Differential Thermal Analysis ◽  
Thermal Treatment ◽  
Oxidation Temperature ◽  
X Ray Diffraction ◽  
Thermo Gravimetric ◽  
X Ray

The character of ilmenite was modified by pretreatment, the effect of pre-oxidation temperature and time on structure of ilmenite were investigated by X-ray diffraction(XRD) and Thermo-gravimetric/differential thermal analysis. The results indicated that new microcrystal rutile and FeTiO3·Fe2O3 solid solution were appeared on the surface of mineral below 800°C, but evident rutile crystals and pseudobrookite Fe2O3·TiO2 were appeared above 850°C with the structure of ilmenite disrupting simultaneously. The preoxidation time increased from 15min to 60min, evident microcrystal rutile and FeTiO3·Fe2O3 solid solution were appeared by degrees without structure of ilmenite breaking.

Effect of ZrO2 Nanofiller on the Physical Properties of Epoxy Composites: Mechanical, Thermal and Dielectric

2021 ◽  
Vol 14 (5) ◽  
pp. 425-435
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Thermo Gravimetric Analysis ◽  
Thermal Characteristics ◽  
Zirconium Oxychloride ◽  
Precipitation Method ◽  
Zro2 Nanoparticles ◽  
Gravimetric Analysis ◽  
Thermo Gravimetric ◽  
Zirconia Nanoparticles

Abstract: In this present work, Zirconia nanoparticles were prepared by precipitation method, Zirconium Oxychloride (ZrOCl2.8H2O) and ammonia (NH3) as starting materials. The synthesized Zirconia nanoparticles were characterized by XRD and the grain size in nanoscale was confirmed. The sheets of neat epoxy resin and epoxy with addition of ZrO2 nanoparticles are primed by solution casting method. The structures of epoxy polymer and hardener were found out using FTIR analysis. The thermal properties were analyzed using Thermo Gravimetric Analysis (TGA) and Differential Thermal Analysis (DTA). Thermo gravimetric analysis has been employed to investigate the thermal characteristics and their mode of thermal degradation. Differential thermal analysis has been used to determine the glass transition temperature of epoxy nanocomposites. The mechanical properties like tensile and flexural studies were analyzed and thus influences of nanofiller loading on these parameters were found to be very low. Keywords: Epoxy, ZrO2 nanoparticles, Nanocomposites, Thermal stability, Dielectric properties, Tensile strength, Flexural strength.

scholarly journals Hypoeutectic Al-Si Alloy Doped with Chromium, Tungsten and Molybdenum Designated for Pressure Die Casting

2017 ◽  
Vol 62 (3) ◽  
pp. 1629-1635 ◽  
Author(s):  
T. Szymczak ◽  
G. Gumienny ◽  
B. Kurowska ◽  
T. Pacyniak
Keyword(s):  
Mechanical Properties ◽  
Thermal Analysis ◽  
Tensile Strength ◽  
Differential Thermal Analysis ◽  
Structural Analysis ◽  
Structural Modification ◽  
Die Casting ◽  
Strength Properties ◽  
Die Castings ◽  
Pressure Die Casting

AbstractStructural modification of hypoeutectic Al-Si alloy EN-AC 46000 alloy influences its microstructure and mechanical properties. In a series of examinations the EN-AC 46000 alloy has been doped with Cr, W and Mo. The study involved the differential thermal analysis (DTA) and the light microscopy structural analysis of the samples cut from pressure die castings and from samples cast into the DTA cup. The DTA and microstructure analyses revealed new phases in the alloy doped with mentioned additives. The strength properties measurements of the alloys doped with Cr, W and Mo showed significant improvement in tensile strength and elongation, while preserving good hardness.

Zeolites Fit For A Crown: Probing Host-Guest Interactions with Thermogravimetric Methods

2018 ◽  
Author(s):  
Asel Sartbaeva ◽  
Paul R. Raithby ◽  
Remi Castaing ◽  
Antony Nearchou
Keyword(s):  
Mass Spectrometry ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Petrochemical Industry ◽  
Rational Use ◽  
New Methodologies ◽  
First Time ◽  
Kinetics Of

Through a combination of thermogravimetry, mass spectrometry and differential thermal analysis, we demonstrate for the first time that all four zeolites show experimental differences in their host-guest interactions with 18C6. In addition, we have estimated the kinetics of 18C6 decomposition, which is a technique that has not been applied to zeolites previously. Using these findings as a toolkit, a more rational use of OSDAs can be utilised to prepare designer zeolites. Furthermore, the new methodologies presented herein can be applied to current zeolites, such as MFI-type zeolites used in the petrochemical industry.

PHASE EQUILIBRIUM IN THE AS2TE3-TM2TE3 SYSTEM.

2020 ◽  
Vol 5 (8(77)) ◽  
pp. 65-68
Author(s):  
Teymur Mammad Ilyasly ◽  
Rahman Hasanaga Fatullazade ◽  
Zakir Islam Ismailov ◽  
Nigar Nadir Jafarova
Keyword(s):  
Thermal Analysis ◽  
Solid Solution ◽  
Differential Thermal Analysis ◽  
Phase Equilibrium ◽  
Physicochemical Properties ◽  
Thermal Effects ◽  
Isothermal Annealing ◽  
Intermediate Phase ◽  
Physicochemical Analysis ◽  
Two Phases

The synthesis of alloys of the system was carried out stepwise in rotary furnaces. The synthesis mode was selected based on the physicochemical properties of the elementary components. For homogenization, the alloys were subjected to isothermal annealing at 750 and 1275 K, depending on the Tm2Te3 concentration, for 250 h after homogenization of the alloys, they were subjected to physicochemical analysis. The results of differential thermal analysis showed that reversible thermal effects are observed in the alloys of the system. In alloys in a 1: 1 ratio, a new intermediate phase is formed with a composition corresponding to the TmAsTe3 compound. The homogeneity area is observed in the concentration range 52.5-47.5. It was found that in the concentration range 98.5-52.5 Tm2Te3 there are two phases - a mixture of β and of the solid solution, and in the concentration range of 47.51 mol% Tm2Te3 phases and α are in equilibrium. ) 66 The eutectic has coordinates of 11.5 mol Tm2Te3 at a temperature of 575 K.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

Kinetics of temperature-programmed reactivation of a hydrodesulphurization catalyst

1983 ◽  
Vol 48 (12) ◽  
pp. 3340-3355 ◽  
Author(s):  
Pavel Fott ◽  
Pavel Šebesta
Keyword(s):  
Carbon Dioxide ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Thin Layer ◽  
Kinetic Parameters ◽  
Diffusion Region ◽  
Reaction Heat ◽  
Gaseous Products ◽  
Temperature Programmed ◽  
Kinetics Of

The kinetic parameters of reactivation of a carbonized hydrodesulphurization (HDS) catalyst by air were evaluated from combined thermogravimetric (TG) and differential thermal analysis (DTA) data. In addition, the gaseous products leaving a temperature-programmed reactor with a thin layer of catalyst were analyzed chromatographically. Two exothermic processes were found to take part in the reactivation, and their kinetics were described by 1st order equations. In the first process (180-400 °C), sulphur in Co and Mo sulphides is oxidized to sulphur dioxide; in the second process (300-540 °C), in which the essential portion of heat is produced, the deposited carbon is oxidized to give predominantly carbon dioxide. If the reaction heat is not removed efficiently enough, ignition of the catalyst takes place, which is associated with a transition to the diffusion region. The application of the obtained kinetic parameters to modelling a temperature-programmed reactivation is illustrated on the case of a single particle.

Effect of experimental conditions on the differential thermal-analysis of karnallite type hydrates

1984 ◽  
Vol 49 (12) ◽  
pp. 2770-2775
Author(s):  
Vladimir Z. Poilov ◽  
Jana Ederová ◽  
Antonín Blažek
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Experimental Conditions

Article in Russian

Sign in / Sign up

Export Citation Format

Share Document