scholarly journals Mixed and Fluid Film Lubrication Characteristics of Worn Journal Bearings

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Toshiharu Kazama ◽  
Yukihito Narita
Keyword(s):  
Frictional Coefficient ◽  
Journal Bearings ◽  
Mixed Lubrication ◽  
Operating Conditions ◽  
Fluid Film ◽  
Asperity Contact ◽  
Lubrication Regimes ◽  
Lubrication Characteristics ◽  
Film Lubrication ◽  
Fluid Film Lubrication

The mixed and fluid film lubrication characteristics of plain journal bearings with shape changed by wear are numerically examined. A mixed lubrication model that employs both of the asperity-contact mechanism proposed by Greenwood and Williamson and the average flow model proposed by Patir and Cheng includes the effects of adsorbed film and elastic deformation is applied. Considering roughness interaction, the effects of the dent depth and operating conditions on the loci of the journal center, the asperity-contact and hydrodynamic fluid pressures, friction, and leakage are discussed. The following conclusions are drawn. In the mixed lubrication regime, the dent of the bearing noticeably influences the contact and fluid pressures. For smaller dents, the contact pressure and frictional coefficient reduce. In mixed and fluid film lubrication regimes, the pressure and coefficient increase for larger dents. Furthermore, as the dent increases and the Sommerfeld number decreases, the flow rate continuously increases.

A Mixed-TEHD Model for Journal-Bearing Conformal Contact—Part II: Contact, Film Thickness, and Performance Analyses

1998 ◽  
Vol 120 (2) ◽  
pp. 206-213 ◽  
Author(s):  
Qian (Jane) Wang ◽  
Fanghui Shi ◽  
Si C. Lee
Keyword(s):  
Journal Bearing ◽  
Thermal Conditions ◽  
Journal Bearings ◽  
Mixed Lubrication ◽  
Operating Conditions ◽  
Contact Theory ◽  
Asperity Contact ◽  
High Eccentricity ◽  
And Performance ◽  
Contact Part

Investigation of the mixed lubrication of journal-bearing conformal contacts is very important for failure prevention and design improvement. This paper studies the asperity contact in heavily loaded journal bearings with Lee and Ren’s asperity contact theory in a newly developed mixed-TEHD (Thermal Elasto-Hydro-Dynamic) model and analyzes the performance of simulated journal bearings under high eccentricity ratios. The effects of operating conditions, bearing structures, and thermal conditions on the contact severity were numerically investigated. The results indicate that the asperity contact pressure and the performance of journal bearings in the mixed lubrication are strongly affected by the geometric design and the thermal-elastic deformations. The heat transfer of the bearing-lubricant-journal system was also shown to play a role.

Fluid-Film Lubrication Regimes Revisited

1991 ◽  
Vol 34 (4) ◽  
pp. 628-632 ◽  
Author(s):  
M. Esfahanian ◽  
B. J. Hamrock
Keyword(s):  
Fluid Film ◽  
Lubrication Regimes ◽  
Film Lubrication ◽  
Fluid Film Lubrication

A Study of the Role of Synovial Fluid and its Constituents in the Friction and Lubrication of Human Hip Joints

1978 ◽  
Vol 7 (2) ◽  
pp. 73-83 ◽  
Author(s):  
J. O'Kelly ◽  
A. Unsworth ◽  
D. Dowson ◽  
D. A. Hall ◽  
V. Wright
Keyword(s):  
Synovial Fluid ◽  
Mixed Lubrication ◽  
Fluid Film ◽  
Hip Joints ◽  
A Value ◽  
Continuous Dynamic ◽  
Film Lubrication ◽  
Fluid Film Lubrication ◽  
Lubrication Mechanisms

Human hip joints have been studied in a pendulum apparatus and a joint simulator to determine the lubrication mechanisms active in normal physiological activities. Various lubricants have been used to lubricate the hip joints including bovine and human synovial fluid, synovial fluid which has been digested with hyaluronidase or trypsin, silicone fluids of different viscosities, as well as synovial fluid and Ringer's solution which have had their viscosities increased by the addition of hyaluronic acid. The results indicate that under continuous dynamic loading, fluid film lubrication seems to prevail while under static loading, mixed lubrication exists. Increasing the viscosity of the lubricant from very low values (i.e. from 10-3 Pa.s) leads to a reduction in friction, indicating mixed lubrication, until a value of about 0.050 Pa.s was achieved. Further increases seemed to indicate that fluid film lubrication was then present.

scholarly journals Contact stiffness and damping of spiral bevel gears under transient mixed lubrication conditions

Friction ◽  
2021 ◽  
Author(s):  
Zongzheng Wang ◽  
Wei Pu ◽  
Xin Pei ◽  
Wei Cao
Keyword(s):  
Contact Stiffness ◽  
Mixed Lubrication ◽  
Asperity Contact ◽  
Spiral Bevel Gears ◽  
Bevel Gears ◽  
Dry Contact ◽  
Spiral Bevel ◽  
Stiffness And Damping ◽  
Lubrication Conditions ◽  
Film Lubrication

AbstractExisting studies primarily focus on stiffness and damping under full-film lubrication or dry contact conditions. However, most lubricated transmission components operate in the mixed lubrication region, indicating that both the asperity contact and film lubrication exist on the rubbing surfaces. Herein, a novel method is proposed to evaluate the time-varying contact stiffness and damping of spiral bevel gears under transient mixed lubrication conditions. This method is sufficiently robust for addressing any mixed lubrication state regardless of the severity of the asperity contact. Based on this method, the transient mixed contact stiffness and damping of spiral bevel gears are investigated systematically. The results show a significant difference between the transient mixed contact stiffness and damping and the results from Hertz (dry) contact. In addition, the roughness significantly changes the contact stiffness and damping, indicating the importance of film lubrication and asperity contact. The transient mixed contact stiffness and damping change significantly along the meshing path from an engaging-in to an engaging-out point, and both of them are affected by the applied torque and rotational speed. In addition, the middle contact path is recommended because of its comprehensive high stiffness and damping, which maintained the stability of spiral bevel gear transmission.

Paper 3: Recent Developments in Fluid Film Lubrication Theory

1967 ◽  
Vol 182 (1) ◽  
pp. 36-50 ◽  
Author(s):  
T. Lloyd ◽  
H. McCallion
Keyword(s):  
Finite Difference ◽  
High Speed ◽  
Lubrication Theory ◽  
Fluid Film ◽  
Special Topic ◽  
Finite Difference Schemes ◽  
Great Activity ◽  
Wide Range ◽  
Film Lubrication ◽  
Fluid Film Lubrication

Developments in high-speed electronic computers have greatly influenced the progress in fluid film lubrication over the past ten years. Static and dynamic oil film parameters have been computed for a wide range of finite geometries, for hydrostatic and hydrodynamic bearings lubricated by compressible and incompressible lubricants. These are either sufficient in themselves or else act as a yardstick against which approximate formulas may be tested. Much use has been made of iterative finite difference schemes, which are particularly well suited to digital computers, and these methods are now more fully understood. Other methods of solution include direct inversion of finite difference matrices and solution by expression of the pressure by some infinite series, a finite number of terms of which give adequate representation. Besides the increase in design data available, there has been substantial progress through a re-examination of the effects of modifying some of the assumptions inherent in most of the available solutions of the Reynolds equation. These include the assumption of constant lubricant viscosity, of rigid surfaces and of laminar flow. Major progress has been witnessed in two fields. The interaction of the lubricant film with elastic boundaries has been shown to be of prime importance in highly loaded contacts such as gears. This has led to the development of the special topic of elastohydrodynamic lubrication theory. The applicability of gas bearings in such growing industries as computers, space vehicles and nuclear reactors has resulted in great activity and progress in this field.

Numerical Modeling of Mixed Lubrication and Flash Temperature in EHL Elliptical Contacts

2007 ◽  
Vol 130 (1) ◽  
Author(s):  
Neelesh Deolalikar ◽  
Farshid Sadeghi ◽  
Sean Marble
Keyword(s):  
Surface Deformation ◽  
Elastohydrodynamic Lubrication ◽  
Mixed Lubrication ◽  
Asperity Contact ◽  
Lubrication Regime ◽  
Predicting Performance ◽  
Pure Rolling ◽  
Rolling Element ◽  
Contact Pressures ◽  
Film Lubrication

Highly loaded ball and rolling element bearings are often required to operate in the mixed elastohydrodynamic lubrication regime in which surface asperity contact occurs simultaneously during the lubrication process. Predicting performance (i.e., pressure, temperature) of components operating in this regime is important as the high asperity contact pressures can significantly reduce the fatigue life of the interacting components. In this study, a deterministic mixed lubrication model was developed to determine the pressure and temperature of mixed lubricated circular and elliptic contacts for measured and simulated surfaces operating under pure rolling and rolling/sliding condition. In this model, we simultaneously solve for lubricant and asperity contact pressures. The model allows investigation of the condition and transition from boundary to full-film lubrication. The variation of contact area and load ratios is examined for various velocities and slide-to-roll ratios. The mixed lubricated model is also used to predict the transient flash temperatures occurring in contacts due to asperity contact interactions and friction. In order to significantly reduce the computational efforts associated with surface deformation and temperature calculation, the fast Fourier transform algorithm is implemented.

The breakdown of fluid film lubrication in elastic-isoviscous point contacts

Wear ◽  
1980 ◽  
Vol 63 (1) ◽  
pp. 25-40 ◽  
Author(s):  
J.B. Medley ◽  
A.B. Strong ◽  
R.M. Pilliar ◽  
E.W. Wong
Keyword(s):  
Fluid Film ◽  
Point Contacts ◽  
Film Lubrication ◽  
Fluid Film Lubrication
Sign in / Sign up

Export Citation Format

Share Document