scholarly journals Modeling and Simulation of a Moving Yarn Segment: Based on the Absolute Nodal Coordinate Formulation

2019 ◽  
Vol 2019 ◽  
pp. 1-15
Author(s):  
Shujia Li ◽  
Yongxing Wang ◽  
Xunxun Ma ◽  
Shengze Wang
Keyword(s):  
Absolute Nodal Coordinate Formulation ◽  
Longitudinal Direction ◽  
Three Dimensions ◽  
Actual Process ◽  
Absolute Nodal Coordinate ◽  
Proposed Model ◽  
Air Resistance ◽  
The Absolute ◽  
Experimental Comparisons

A new finite element dynamic model of a moving yarn segment has been proposed in this paper based on the absolute nodal coordinate formulation (ANCF). Apart from taking into account the elastic properties of the yarn in three dimensions, the model also considers the viscosity in the longitudinal direction and takes into account the effect of gravity and air resistance. In this paper, the simulation described the movement of the yarn segment that is pulled by the fixer on the guideway. Then, a corresponding experiment was proposed to evaluate the theoretical model. The theoretical and experimental comparisons of the motion tracing exhibited good agreement, demonstrating that the new model could predict the actual moving trace of the yarn segment. Moreover, another simulation of the spatial motion of the yarn segment was presented, to elucidate the role of the model in predicting the movement of the yarn segment. After considering the parameters of the actual process and its constraints, the authors established that the proposed model could be used to predict the trajectory of a yarn segment in the actual production process, which is vital when fabricating textile products.

A Linear Beam Finite Element Based on the Absolute Nodal Coordinate Formulation

2004 ◽  
Vol 127 (4) ◽  
pp. 621-630 ◽  
Author(s):  
Kimmo S. Kerkkänen ◽  
Jussi T. Sopanen ◽  
Aki M. Mikkola
Keyword(s):  
Absolute Nodal Coordinate Formulation ◽  
Longitudinal Direction ◽  
Beam Element ◽  
Computational Effort ◽  
Two Dimensional ◽  
Absolute Nodal Coordinate ◽  
Beam Elements ◽  
Shear Deformable Beam ◽  
The Absolute ◽  
Shear Deformable

In this paper, a new two-dimensional shear deformable beam element based on the absolute nodal coordinate formulation is proposed. The nonlinear elastic forces of the beam element are obtained using a continuum mechanics approach, without employing a local element coordinate system. In this study, linear polynomials are used to interpolate both the transverse and longitudinal components of the displacement. This is different from other absolute nodal-coordinate-based beam elements where cubic polynomials are used in the longitudinal direction. The use of linear interpolation polynomials leads to the phenomenon known as shear locking. This defect is avoided through the adoption of selective integration within the numerical integration method. The proposed element is verified using several numerical examples. The results of the proposed element are compared to analytical solutions and the results for an existing shear deformable beam element. It is shown that by using the proposed element, accurate linear and nonlinear static deformations, as well as realistic dynamic behavior including the capturing of the centrifugal stiffening effect, can be achieved with a smaller computational effort than by using existing shear deformable two-dimensional beam elements.

Performance of the Incremental and Non-Incremental Finite Element Formulations in Flexible Multibody Problems

1999 ◽  
Vol 122 (4) ◽  
pp. 498-507 ◽  
Author(s):  
Marcello Campanelli ◽  
Marcello Berzeri ◽  
Ahmed A. Shabana
Keyword(s):  
Finite Element ◽  
Multibody Systems ◽  
Absolute Nodal Coordinate Formulation ◽  
Flexible Multibody Systems ◽  
Large Displacement ◽  
Body Motion ◽  
Absolute Nodal Coordinate ◽  
Flexible Multibody ◽  
The Absolute ◽  
Finite Element Formulations

Many flexible multibody applications are characterized by high inertia forces and motion discontinuities. Because of these characteristics, problems can be encountered when large displacement finite element formulations are used in the simulation of flexible multibody systems. In this investigation, the performance of two different large displacement finite element formulations in the analysis of flexible multibody systems is investigated. These are the incremental corotational procedure proposed in an earlier article (Rankin, C. C., and Brogan, F. A., 1986, ASME J. Pressure Vessel Technol., 108, pp. 165–174) and the non-incremental absolute nodal coordinate formulation recently proposed (Shabana, A. A., 1998, Dynamics of Multibody Systems, 2nd ed., Cambridge University Press, Cambridge). It is demonstrated in this investigation that the limitation resulting from the use of the infinitesmal nodal rotations in the incremental corotational procedure can lead to simulation problems even when simple flexible multibody applications are considered. The absolute nodal coordinate formulation, on the other hand, does not employ infinitesimal or finite rotation coordinates and leads to a constant mass matrix. Despite the fact that the absolute nodal coordinate formulation leads to a non-linear expression for the elastic forces, the results presented in this study, surprisingly, demonstrate that such a formulation is efficient in static problems as compared to the incremental corotational procedure. The excellent performance of the absolute nodal coordinate formulation in static and dynamic problems can be attributed to the fact that such a formulation does not employ rotations and leads to exact representation of the rigid body motion of the finite element. [S1050-0472(00)00604-8]

Elastic Forces and Coordinate Systems in the Finite Element Formulations

1999 ◽  
Author(s):  
Marcello Berzeri ◽  
Marcello Campanelli ◽  
A. A. Shabana
Keyword(s):  
Finite Element ◽  
Absolute Nodal Coordinate Formulation ◽  
Frame Of Reference ◽  
Coordinate Systems ◽  
Absolute Nodal Coordinate ◽  
Floating Frame Of Reference ◽  
Elastic Forces ◽  
Floating Frame ◽  
The Absolute ◽  
Finite Element Formulations

Abstract The equivalence of the elastic forces of finite element formulations used in flexible multibody dynamics is the focus of this investigation. Two conceptually different finite element formulations that lead to exact modeling of the rigid body dynamics will be used. These are the floating frame of reference formulation and the absolute nodal coordinate formulation. It is demonstrated in this study that different element coordinate systems, which are used for the convenience of describing the element deformations in the absolute nodal coordinate formulation, lead to similar results as the element size is reduced. The equivalence of the elastic forces in the absolute nodal coordinate and the floating frame of reference formulations is shown. The result of this analysis clearly demonstrates that the instability observed in high speed rotor analytical models due to the neglect of the geometric centrifugal stiffening is not a problem inherent to a particular finite element formulation but only depends on the beam model that is used. Fourier analysis of the solutions obtained in this investigation also sheds new light on the fundamental problem of the choice of the deformable body coordinate system in the floating frame of reference formulation. A new method is presented and used to obtain a simple expression for the elastic forces in the absolute nodal coordinate formulation. This method, which employs a nonlinear elastic strain-displacement relationship, does not result in an unstable solution when the angular velocity is increased.

A Numerical Approach to Solving Flexible Multibody Systems Using the Absolute Nodal Coordinate Formulation

1999 ◽  
Author(s):  
R. Y. Yakoub ◽  
A. A. Shabana
Keyword(s):  
Absolute Nodal Coordinate Formulation ◽  
Sparse Matrix ◽  
Mass Matrix ◽  
Numerical Approach ◽  
Absolute Nodal Coordinates ◽  
Absolute Nodal Coordinate ◽  
Velocity Transformation ◽  
Flexible Multibody ◽  
Nodal Coordinates ◽  
The Absolute

Abstract By utilizing the fact that the absolute nodal coordinate formulation leads to a constant mass matrix, a Cholesky decomposition of the mass matrix can be used to obtain a constant velocity transformation matrix. This velocity transformation can be used to express the absolute nodal coordinates in terms of the generalized Cholesky coordinates. In this case, the inertia matrix associated with the Cholesky coordinates is the identity matrix, and therefore, an optimum sparse matrix structure can be obtained for the augmented multibody equations of motions. The implementation of a computer procedure based on the absolute nodal coordinate formulation and Cholesky coordinates is discussed in this paper. A flexible four-bar linkage is presented in this paper in order to demonstrate the use of Cholesky coordinates in the simulation of the small and large deformations in flexible multibody applications. The results obtained from the absolute nodal coordinate formulation are compared to those obtained from the floating frame of reference formulation.

Sign in / Sign up

Export Citation Format

Share Document