Effects of a flow mode transition on natural convection heat transfer in a heat tracing enclosure

2018 ◽  
Vol 233 (3) ◽  
pp. 489-499 ◽  
Author(s):  
CJ Ho ◽  
GN Sou ◽  
CM Lai
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Flow Field ◽  
Numerical Study ◽  
Flow Direction ◽  
Convection Heat Transfer ◽  
Flow Mode ◽  
Mode Transition ◽  
Flow And Heat Transfer ◽  
Lower Variation

This paper presents a numerical study of transient buoyancy-induced fluid flow and heat transfer between two horizontal, differentially heated pipelines inside a circular, air-filled enclosure. Numerical simulations based on the finite difference method were conducted to investigate the flow mode transition of the buoyant airflow and its effects on the heat transfer characteristics of the pipelines. The results indicate that the fluid flow complexity and the heat transfer of air between the pipelines are strongly affected by the Rayleigh number. When Ra = 6 × 105 and 1.2 × 106, both the flow field and the temperature distribution exhibit periodic variations with different patterns. The former ( Ra = 6 × 105) is a complete alteration of the flow direction from clockwise to counterclockwise, whereas the latter is a variation in the flow field strength that varies between strong and weak. The latter has a lower variation frequency than that of the former.

The Effect of Blockage Ratio on Fluid Flow and Heat Transfer around a Confined Square Cylinder under the Effect Thermal Buoyancy

2018 ◽  
Vol 16 ◽  
pp. 1-11
Author(s):  
Houssem Laidoudi
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Blockage Ratio ◽  
Square Cylinder ◽  
Total Drag ◽  
Thermal Buoyancy ◽  
2D Simulation ◽  
Flow And Heat Transfer

2D simulation is carried out to determine exactly the effect of blockage ratio on the flow and mixed convection heat transfer characteristics of Newtonian fluid across a square cylinder confined in horizontal channel, the numerical study is investigated in the range of these conditions:Re= 10 to 30,Ri= 0 to 1 and blockage ratioβ= 1/10 to 1/2. The flow structure and temperature field are visualized in terms of streamlines and isotherm contours. The total drag coefficient and average Nusselt number are also reported to show the combined effects of thermal buoyancy, Reynolds number and blockage ratio on the hydrodynamic flow forces and heat transfer rate. The obtained results showed that the effect of thermal buoyancy on fluid flow and heat transfer becomes more pronounced by decreasing the blockage ratio.

scholarly journals Numerical study of natural melt convection in cylindrical cavity with hot walls and cold bottom sink

2013 ◽  
Vol 17 (3) ◽  
pp. 853-864 ◽  
Author(s):  
Abdennacer Ahmanache ◽  
Noureddine Zeraibi
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Heat Exchanger ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Cylindrical Cavity ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Bulk Temperature ◽  
Flow And Heat Transfer

Numerical study of natural convection heat transfer and fluid flow in cylindrical cavity with hot walls and cold sink is conducted. Calculations are performed in terms of the cavity aspect ratio, the heat exchanger length and the thermo physical properties expressed via the Prandtl number and the Rayleigh number. Results are presented in the form of isotherms, streamlines, average Nusselt number and average bulk temperature for a range of Rayleigh number up to 106. It is observed that Rayleigh number and heat exchanger length influences fluid flow and heat transfer, whereas the cavity aspect ratio has no significant effects.

A Parametric Numerical Study of Fluid Flow and Heat Transfer in a Computer Chassis

2015 ◽  
Vol 9 (3) ◽  
pp. 242 ◽  
Author(s):  
Efstathios Kaloudis ◽  
Dimitris Siachos ◽  
Konstantinos Stefanos Nikas
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Numerical Study ◽  
Flow And Heat Transfer

scholarly journals Natural convection in a differentially heated enclosure with triangular roof

1970 ◽  
Vol 39 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Sumon Saha ◽  
Noman Hasan ◽  
Chowdhury Md Feroz
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Natural Convection ◽  
Average Nusselt Number ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Element Analysis ◽  
Left Wall ◽  
Square Enclosure

A numerical study has been carried out for laminar natural convection heat transfer within a two-dimensional modified square enclosure having a triangular roof. The vertical sidewalls are differentially heated considering a constant flux heat source strip is flush mounted with the left wall. The opposite wall is considered isothermal having a temperature of the surrounding fluid. The rest of the walls are adiabatic. Air is considered as the fluid inside the enclosure. The solution has been carried out on the basis of finite element analysis by a non-linear parametric solver to examine the heat transfer and fluid flow characteristics. Different heights of the triangular roof have been considered for the present analysis. Fluid flow fields and isotherm patterns and the average Nusselt number are presented for the Rayleigh numbers ranging from 103 to 106 in order to show the effects of these governing parameters. The average Nusselt number computed for the case of isoflux heating is also compared with the case of isothermal heating as available in the literature. The outcome of the present investigation shows that the convective phenomenon is greatly influenced by the inclined roof height. Keywords: Natural convection, triangular roof, Rayleigh number, isoflux heating. Doi:10.3329/jme.v39i1.1826 Journal of Mechanical Engineering, vol. ME39, No. 1, June 2008 1-7

Magnetohydrodynamic effects on flow structures and heat transfer over two cylinders wrapped with a porous layer in side

2016 ◽  
Vol 26 (5) ◽  
pp. 1416-1432 ◽  
Author(s):  
Saman Rashidi ◽  
Javad Abolfazli Esfahani ◽  
Mohammad Sadegh Valipour ◽  
Masoud Bovand ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Flow Field ◽  
Porous Layer ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Circular Cylinders ◽  
Flow Structures ◽  
Content Type ◽  
The Magnetic Field

Purpose – The analysis of the flow field and heat transfer around a tube row or tube banks wrapped with porous layer have many related engineering applications. Examples include the reactor safety analysis, combustion, compact heat exchangers, solar power collectors, high-performance insulation for buildings and many another applications. The purpose of this paper is to perform a numerical study on flows passing through two circular cylinders in side-by-side arrangement wrapped with a porous layer under the influence of a magnetic field. The authors focus the attention to the effects of magnetic field, Darcy number and pitch ratio on the mechanism of convection heat transfer and flow structures. Design/methodology/approach – The Darcy-Brinkman-Forchheimer model for simulating the flow in porous medium along with the Maxwell equations for providing the coupling between the flow field and the magnetic field have been used. Equations with the relevant boundary conditions are numerically solved using a finite volume approach. In this study, Stuart and Darcy numbers are varied within the range of 0 < N < 3 and 1e-6 < Da < 1e-2, respectively, and Reynolds and Prandtl numbers are equal to Re=100 and Pr=0.71, respectively. Findings – The results show that the drag coefficient decreases for N < 0.6 and increases for N > 0.6. Also, the effect of magnetic field is negligible in the gap between two cylinders because the magnetic field for two cylinders counteracts each other in these regions. Originality/value – To the authors knowledge, in the open literature, flow passing over two circular cylinders in side-by-side arrangement wrapped with a porous layer has been rarely investigated especially under the influence of a magnetic field.

Numerical Investigation of Mixed Convection Heat Transfer in Steady Flow Past a Row of Three Square Cylinders

2018 ◽  
Vol 389 ◽  
pp. 164-175
Author(s):  
Houssem Laidoudi ◽  
Bilal Blissag ◽  
Mohamed Bouzit
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Mixed Convection ◽  
Convection Heat Transfer ◽  
Convection Heat ◽  
Thermal Buoyancy ◽  
Flow And Heat Transfer ◽  
Square Cylinders ◽  
Laminar Mixed Convection ◽  
Mixed Convection Heat Transfer

In this paper, the numerical simulations of laminar mixed convection heat transfer from row of three isothermal square cylinders placed in side-by-side arrangement are carried out to understand the behavior of fluid flow around those cylinders under gradual effect of thermal buoyancy and its effect on the evacuation of heat energy. The numerical results are presented and discussed for the range of these conditions: Re = 10 to 40, Ri = 0 to 2 at fixed value of Prandtl number of Pr = 1 and at fixed geometrical configuration. In order to analyze the effect of thermal buoyancy on fluid flow and heat transfer characteristics the main results are illustrated in terms of streamline and isotherm contours. The total drag coefficient as well as average Nusselt number of each cylinder are also computed to determine exactly the effect of buoyancy strength on hydrodynamic force and heat transfer evacuation of each cylinder.

Sign in / Sign up

Export Citation Format

Share Document